HTS Chapter 84 · Section XVI
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof
Chapter 84 averages a 1.4% general (MFN) duty across its 824 rated tariff lines, with the steepest line reaching 9.9%.
- 1.4%
- avg MFN duty
- 9.9%
- highest line
- 824
- rated tariff lines
- 60%
- enter duty-free
Tariff lines in Chapter 84 by duty-rate band
How the 824 rated lines in this chapter distribute across general (MFN) rate ranges
About HTS Chapter 84
HTS Chapter 84 - Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof - organizes 2,667 tariff classifications in the US Harmonized Tariff Schedule. Of these, 824 carry explicit duty rates at the tariff-line level, meaning importers can look up a specific Column 1 General (MFN) rate for every qualifying shipment. Chapter 84 sits within Section XVI (Machinery; Electrical Equipment; Parts Thereof), which groups commercially related product categories together.
The average general duty rate across all tariff lines in this chapter is 1.4%, with the highest individual rate reaching 9.9%. Duty burden varies widely across tariff lines within this chapter, classification precision matters. Below, each line links to its individual detail page showing General, Special (FTA), and Column 2 rates.
Use this chapter page as the entry point for classifying any product that falls under nuclear reactors, boilers, machinery and mechanical appliances; parts thereof. The tree below preserves the HTS indentation hierarchy (heading → subheading → tariff line), so you can narrow from broad category to specific 8-10 digit code. All data comes from the US International Trade Commission (USITC) HTS 2026 Basic Edition, the official schedule of import duties used by US Customs and Border Protection.
Chapter 84 At a Glance
| Metric | Value | Notes |
|---|---|---|
| Total tariff classifications | 2,667 | All headings, subheadings, and tariff lines. |
| Lines with explicit rates | 824 | Tariff lines carrying a Column 1 General duty. |
| Average general rate | 1.4% | Mean MFN rate across rated lines. |
| Highest line rate | 9.9% | Peak Column 1 General rate within the chapter. |
Source: USITC Harmonized Tariff Schedule 2026 Basic Edition. Computed at last data refresh, see methodology.
Tariff Lines
8401 Nuclear reactors; fuel elements (cartridges), non-irradiated, for nuclear reactors; machinery and apparatus for isotopic separation; parts thereof:
8401.10.00.00 Nuclear reactors
t 3.3%
8401.20.00.00 Machinery and apparatus for isotopic separation, and parts thereof
t 2.6%
8401.30.00.00 Fuel elements (cartridges), non-irradiated, and parts thereof
kg 3.3%
8401.40.00.00 Parts of nuclear reactors
t 3.3%
8402 Steam or other vapor generating boilers (other than central heating hot water boilers capable also of producing low pressure steam); super-heated water boilers; parts thereof:
Steam or other vapor generating boilers:
8402.11.00.00 Watertube boilers with a steam production exceeding 45 t per hour
t 5.2%
8402.12.00.00 Watertube boilers with a steam production not exceeding 45 t per hour
t 4.3%
8402.19.00.00 Other vapor generating boilers, including hybrid boilers
t 5.2%
8402.20.00.00 Super-heated water boilers
t 3.3%
8402.90.00 Parts
4.3%
8402.90.00.10 Heat exchangers
t 8402.90.00.90 Other
kg 8403 Central heating boilers (other than those of heading 8402) and parts thereof:
8403.10.00.00 Boilers
No. Free
8403.90.00.00 Parts
kg Free
8404 Auxiliary plant for use with boilers of heading 8402 or 8403 (for example, economizers, super-heaters, soot removers, gas recoverers); condensers for steam or other vapor power units; parts thereof:
8404.10.00 Auxiliary plant for use with boilers of heading 8402 or 8403
3.5%
8404.10.00.10 Economizers
t 8404.10.00.50 Other
t 8404.20.00.00 Condensers for steam or other vapor power units
t 5%
8404.90.00.00 Parts
kg 3.5%
8405 Producer gas or water gas generators, with or without their purifiers; acetylene gas generators and similar water process gas generators, with or without their purifiers; parts thereof:
8405.10.00.00 Producer gas or water gas generators, with or without their purifiers; acetylene gas generators and similar water process gas generators, with or without their purifiers
No. Free
8405.90.00.00 Parts
kg Free
8406 Steam turbines and other vapor turbines, and parts thereof:
8406.10 Turbines for marine propulsion:
8406.10.10.00 Steam turbines
No. 6.7%
8406.10.90.00 Other
No. Free
Other turbines:
8406.81 Of an output exceeding 40 MW:
8406.81.10 Steam turbines
6.7%
8406.81.10.20 Stationary steam turbines, condensing type
No. 8406.81.10.70 Other
No. 8406.81.90.00 Other
No. Free
8406.82 Of an output not exceeding 40 MW:
8406.82.10 Steam turbines
6.7%
Stationary steam turbines, condensing type:
8406.82.10.10 Not exceeding 7,460 kW
No. 8406.82.10.20 Exceeding 7,460 kW
No. Other:
8406.82.10.50 Not exceeding 7,460 kW
No. 8406.82.10.70 Exceeding 7,460 kW
No. 8406.82.90.00 Other
No. Free
8406.90 Parts:
Of steam turbines:
8406.90.20.00 Rotors, finished for final assembly
No. 5%
8406.90.30.00 Rotors, not further advanced than cleaned or machined for removal of fins, gates, sprues, and risers, or to permit location in finishing machinery
No. 5%
8406.90.40.00 Blades, rotating or stationary
No. 5%
8406.90.45 Other
5%
8406.90.45.40 Rotors or spindles and rotor or spindle assemblies
No. 8406.90.45.80 Other
kg Other:
8406.90.50.00 Rotors, finished for final assembly
No. Free
8406.90.60.00 Rotors, not further advanced than cleaned or machined for removal of fins, gates, sprues, and risers, or to permit location in finishing machinery
No. Free
8406.90.70.00 Blades, rotating or stationary
No. Free
8406.90.75.00 Other
kg Free
8407 Spark-ignition reciprocating or rotary internal combustion piston engines:
8407.10.00 Aircraft engines
Free
For use in civil aircraft:
New:
8407.10.00.20 Less than 373 kW
No. 8407.10.00.40 373 kW or over
No. 8407.10.00.60 Used or rebuilt
No. 8407.10.00.90 Other
No. Marine propulsion engines:
8407.21.00 Outboard motors
Free
8407.21.00.40 Less than 22.38 kW
No. 8407.21.00.80 Other
No. 8407.29.00 Other
Free
8407.29.00.10 Inboard engines with outboard drive
No. Inboard engines with inboard drive:
8407.29.00.20 Less than 746 W
No. 8407.29.00.30 746 W or greater, but not exceeding 18.65 kW
No. 8407.29.00.40 Exceeding 18.65 kW
No. Reciprocating piston engines of a kind used for the propulsion of vehicles of chapter 87:
8407.31.00 Of a cylinder capacity not exceeding 50 cc
Free
8407.31.00.40 Less than 746 W
No. 8407.31.00.80 Other
No. 8407.32 Of a cylinder capacity exceeding 50 cc but not exceeding 250 cc:
8407.32.10.00 To be installed in tractors suitable for agricultural use
No. Free
8407.32.20 To be installed in vehicles of subheading 8701.21, 8701.22, 8701.23, 8701.24 or 8701.29, or heading 8702, 8703 or 8704
Free
8407.32.20.40 Used or rebuilt
No. 8407.32.20.80 Other
No. 8407.32.90 Other
Free
8407.32.90.40 Not exceeding 18.65 kW
No. 8407.32.90.80 Exceeding 18.65 kW
No. 8407.33 Of a cylinder capacity exceeding 250 cc but not exceeding 1,000 cc:
8407.33.10 To be installed in tractors suitable for agricultural use
Free
8407.33.10.30 Not exceeding 37.3 kW
No. Exceeding 37.3 kW:
8407.33.10.60 Air-cooled
No. 8407.33.10.90 Other
No. To be installed in vehicles of subheading 8701.21, 8701.22, 8701.23, 8701.24 or 8701.29, or heading 8702, 8703 or 8704:
8407.33.30 To be installed in vehicles specially designed for traveling on snow, golf carts, non-amphibious all-terrain vehicles and burden carriers
Free
8407.33.30.40 Used or rebuilt
No. 8407.33.30.80 Other
No. 8407.33.60 Other
2.5%
8407.33.60.40 Used or rebuilt
No. 8407.33.60.80 Other
No. 8407.33.90 Other
Free
8407.33.90.40 Not exceeding 18.65 kW
No. 8407.33.90.80 Exceeding 18.65 kW
No. 8407.34 Of a cylinder capacity exceeding 1,000 cc:
Of a cylinder capacity not exceeding 2,000 cc:
8407.34.05 To be installed in tractors suitable for agricultural use
Free
8407.34.05.30 Not exceeding 37.3 kW
No. Exceeding 37.3 kW:
8407.34.05.60 Air-cooled
No. 8407.34.05.90 Other
No. To be installed in vehicles of subheading 8701.21, 8701.22, 8701.23, 8701.24 or 8701.29, or heading 8702, 8703 or 8704:
8407.34.14.00 Used or rebuilt
No. 2.5%
8407.34.18.00 Other
No. 2.5%
8407.34.25.00 Other
No. Free
Of a cylinder capacity exceeding 2,000 cc:
8407.34.35 To be installed in tractors suitable for agricultural use
Free
8407.34.35.30 Not exceeding 37.3 kW
No. Exceeding 37.3 kW:
8407.34.35.60 Air-cooled
No. 8407.34.35.90 Other
No. To be installed in vehicles of subheading 8701.21, 8701.22, 8701.23, 8701.24 or 8701.29, or heading 8702, 8703 or 8704:
8407.34.44.00 Used or rebuilt
No. 2.5%
8407.34.48.00 Other
No. 2.5%
8407.34.55.00 Other
No. Free
8407.90 Other engines:
8407.90.10 To be installed in agricultural or horticultural machinery or equipment
Free
Not exceeding 37.3 kW:
8407.90.10.10 Less than 4,476 W
No. 8407.90.10.20 Other
No. Other:
8407.90.10.60 Air-cooled
No. 8407.90.10.80 Other
No. 8407.90.90 Other
Free
8407.90.90.10 Gas (natural or liquid propane (LP)) engines
No. Other:
8407.90.90.20 Less than 746 W
No. 8407.90.90.40 746 W or greater but less than 4,476 W
No. 8407.90.90.60 4,476 W or greater but not exceeding 18.65 kW
No. 8407.90.90.80 Exceeding 18.65 kW
No. 8408 Compression-ignition internal combustion piston engines (diesel or semi-diesel engines):
8408.10.00 Marine propulsion engines
2.5%
8408.10.00.05 Not exceeding 111.9 kW
No. 8408.10.00.15 Exceeding 111.9 kW but not exceeding 149.2 kW
No. 8408.10.00.20 Exceeding 149.2 kW but not exceeding 223.8 kW
No. 8408.10.00.30 Exceeding 223.8 kW but not exceeding 373 kW
No. 8408.10.00.40 Exceeding 373 kW but not exceeding 746 kW
No. 8408.10.00.50 Exceeding 746 kW
No. 8408.20 Engines of a kind used for the propulsion of vehicles of chapter 87:
8408.20.10 To be installed in tractors suitable for agricultural use
Free
8408.20.10.40 Not exceeding 37.3 kW
No. 8408.20.10.80 Exceeding 37.3 kW
No. 8408.20.20.00 To be installed in vehicles of subheading 8701.21, 8701.22, 8701.23, 8701.24 or 8701.29, or heading 8702, 8703 or 8704
No. 2.5%
8408.20.90.00 Other
No. 2.5%
8408.90 Other engines:
8408.90.10 To be installed in agricultural or horticultural machinery or equipment
Free
8408.90.10.40 Not exceeding 37.3 kW
No. 8408.90.10.80 Exceeding 37.3 kW
No. 8408.90.90 Other
Free
8408.90.90.10 Not exceeding 149.2 kW
No. 8408.90.90.20 Exceeding 149.2 kW but not exceeding 373 kW
No. 8408.90.90.30 Exceeding 373 kW but not exceeding 746 kW
No. 8408.90.90.40 Exceeding 746 kW but not exceeding 1,119 kW
No. 8408.90.90.50 Exceeding 1,119 kW
No. 8409 Parts suitable for use solely or principally with the engines of heading 8407 or 8408:
8409.10.00 For aircraft engines
Free
8409.10.00.40 For use in civil aircraft
kg 8409.10.00.80 Other
kg Other:
8409.91 Suitable for use solely or principally with spark-ignition internal combustion piston engines (including rotary engines):
8409.91.10 Cast-iron parts, not advanced beyond cleaning, and machined only for the removal of fins, gates, sprues and risers or to permit location in finishing machinery
Free
8409.91.10.40 For vehicles of subheading 8701.21, 8701.22, 8701.23, 8701.24 or 8701.29, or heading 8702, 8703 or 8704
kg 8409.91.10.60 For marine propulsion engines
kg 8409.91.10.80 Other
kg Other:
To be installed in vehicles of subheading 8701.21, 8701.22, 8701.23, 8701.24 or 8701.29, or heading 8702, 8703 or 8704:
8409.91.30.00 Aluminum cylinder heads
No., kg 2.5%
8409.91.50 Other
2.5%
8409.91.50.10 Connecting rods
No., kg 8409.91.50.81 Steel forgings
kg 8409.91.50.85 Other
kg 8409.91.92 For marine propulsion engines
2.5%
8409.91.92.10 Connecting rods
No., kg 8409.91.92.90 Other
kg 8409.91.99 Other
2.5%
8409.91.99.10 Connecting rods
No., kg 8409.91.99.90 Other
kg 8409.99 Other:
8409.99.10 Cast-iron parts, not advanced beyond cleaning, and machined only for the removal of fins, gates, sprues and risers or to permit location in finishing machinery
Free
8409.99.10.40 For vehicles of subheading 8701.21, 8701.22, 8701.23, 8701.24 or 8701.29, or heading 8702, 8703 or 8704
kg 8409.99.10.60 For marine propulsion engines
kg 8409.99.10.80 Other
kg Other:
8409.99.91 To be installed in vehicles of subheading 8701.21, 8701.22, 8701.23, 8701.24 or 8701.29, or heading 8702, 8703 or 8704
2.5%
8409.99.91.10 Connecting rods
No., kg 8409.99.91.90 Other
kg 8409.99.92 For marine propulsion engines
2.5%
8409.99.92.10 Connecting rods
No., kg 8409.99.92.90 Other
kg 8409.99.99 Other
Free
8409.99.99.10 Connecting rods
No., kg 8409.99.99.90 Other
kg 8410 Hydraulic turbines, water wheels and regulators therefor; parts thereof:
Hydraulic turbines and water wheels:
8410.11.00.00 Of a power not exceeding 1,000 kW
No. 3.8%
8410.12.00.00 Of a power exceeding 1,000 kW but not exceeding 10,000 kW
No. 3.8%
8410.13.00.00 Of a power exceeding 10,000 kW
No. 3.8%
8410.90.00.00 Parts, including regulators
kg 3.8%
8411 Turbojets, turbopropellers and other gas turbines, and parts thereof:
Turbojets:
8411.11 Of a thrust not exceeding 25 kN:
8411.11.40.00 Aircraft turbines
No. Free
8411.11.80.00 Other
No. Free
8411.12 Of a thrust exceeding 25 kN:
8411.12.40.00 Aircraft turbines
No. Free
8411.12.80.00 Other
No. Free
Turbopropellers:
8411.21 Of a power not exceeding 1,100 kW:
8411.21.40.00 Aircraft turbines
No. Free
8411.21.80.00 Other
No. Free
8411.22 Of a power exceeding 1,100 kW:
8411.22.40.00 Aircraft turbines
No. Free
8411.22.80.00 Other
No. Free
Other gas turbines:
8411.81 Of a power not exceeding 5,000 kW:
8411.81.40.00 Aircraft turbines
No. Free
8411.81.80 Other
2.5%
8411.81.80.10 Industrial turbines of a kind described in statistical note 1 of this chapter
No. 8411.81.80.90 Other
No. 8411.82 Of a power exceeding 5,000 kW:
8411.82.40.00 Aircraft turbines
No. Free
8411.82.80 Other
2.5%
8411.82.80.10 Industrial turbines of a kind described in statistical note 1 to this chapter
No. 8411.82.80.90 Other
No. Parts:
8411.91 Of turbojets or turbopropellers:
8411.91.10 Cast-iron parts, not advanced beyond cleaning, and machined only for the removal of fins, gates, sprues and risers or to permit location in finishing machinery
Free
8411.91.10.40 Parts of nonaircraft turbines
No. Parts of aircraft turbines:
8411.91.10.60 For use in civil aircraft
No. 8411.91.10.90 Other
No. 8411.91.90 Other
Free
8411.91.90.40 Parts of nonaircraft turbines
No. Parts of aircraft turbines:
8411.91.90.81 Steel forgings
No. 8411.91.90.85 Other
No. 8411.99 Other:
8411.99.10 Cast-iron parts, not advanced beyond cleaning, and machined only for the removal of fins, gates, sprues and risers or to permit location in finishing machinery
Free
8411.99.10.10 Parts of nonaircraft gas turbines
No. Parts of aircraft gas turbines:
8411.99.10.40 For use in civil aircraft
No. 8411.99.10.80 Other
No. 8411.99.90 Other
2.4%
Parts of nonaircraft gas turbines:
8411.99.90.30 Rotors or spindles and rotor or spindle assemblies
No. Other:
8411.99.90.81 Steel forgings
No. 8411.99.90.85 Other
No. 8411.99.90.90 Parts of aircraft gas turbines
No. 8412 Other engines and motors, and parts thereof:
8412.10.00 Reaction engines other than turbojets
Free
8412.10.00.10 Missile and rocket engines
No. 8412.10.00.90 Other
No. Hydraulic power engines and motors:
8412.21.00 Linear acting (cylinders)
Free
8412.21.00.15 Tie-rod type
No. 8412.21.00.30 Weld fused type
No. Other:
8412.21.00.45 Telescoping
No. 8412.21.00.60 Rodless
No. 8412.21.00.75 Other
No. 8412.29 Other:
8412.29.40.00 Hydrojet engines for marine propulsion
No. Free
8412.29.80 Other
Free
Unlimited rotary acting:
8412.29.80.15 Gear type
No. 8412.29.80.30 Radial piston type
No. 8412.29.80.45 Axial piston type
No. 8412.29.80.60 Other
No. 8412.29.80.75 Other
No. Pneumatic power engines and motors:
8412.31.00 Linear acting (cylinders)
Free
8412.31.00.40 Tie-rod type
No. 8412.31.00.80 Other
No. 8412.39.00 Other
Free
8412.39.00.40 Unlimited rotary acting
No. 8412.39.00.80 Other
No. 8412.80 Other engines and motors:
8412.80.10.00 Spring-operated and weight-operated motors
No. Free
8412.80.90.00 Other
No. Free
8412.90 Parts:
8412.90.10.00 Of hydrojet engines for marine propulsion
kg Free
8412.90.90 Other
Free
Of hydraulic power engines and motors:
8412.90.90.05 Of linear acting engines and motors
kg 8412.90.90.15 Other
kg Of pneumatic power engines and motors:
8412.90.90.25 Of linear acting engines and motors
kg 8412.90.90.35 Other
kg 8412.90.90.50 Of reaction engines other than turbojets
kg Other:
8412.90.90.70 Wind turbine blades, imported in accordance with statistical note 2 of this chapter
kg 8412.90.90.75 Wind turbine hubs
kg 8412.90.90.85 Other
kg 8413 Pumps for liquids, whether or not fitted with a measuring device; liquid elevators; part thereof:
Pumps fitted or designed to be fitted with a measuring device:
8413.11.00.00 Pumps for dispensing fuel or lubricants, of the type used in filling-stations or in garages
No. Free
8413.19.00.00 Other
No. Free
8413.20.00.00 Hand pumps, other than those of subheading 8413.11 or 8413.19
No. Free
8413.30 Fuel, lubricating or cooling medium pumps for internal combustion piston engines:
8413.30.10.00 Fuel-injection pumps for compression-ignition engines
No. 2.5%
8413.30.90 Other
2.5%
8413.30.90.30 Fuel pumps
No. 8413.30.90.60 Lubricating pumps
No. 8413.30.90.90 Other
No. 8413.40.00.00 Concrete pumps
No. Free
8413.50.00 Other reciprocating positive displacement pumps
Free
8413.50.00.10 Oil well and oil field pumps
No. 8413.50.00.50 Diaphragm pumps
No. Other:
Hydraulic fluid power pumps
8413.50.00.70 Radial piston type
No. 8413.50.00.80 Other
No. 8413.50.00.90 Other
No. 8413.60.00 Other rotary positive displacement pumps
Free
Hydraulic fluid power pumps:
8413.60.00.20 Vane type
No. 8413.60.00.30 Gear type
No. 8413.60.00.40 Other
No. Other:
8413.60.00.50 Oil well and oil field pumps
No. 8413.60.00.70 Roller pumps
No. 8413.60.00.90 Other
No. 8413.70 Other centrifugal pumps:
8413.70.10.00 Stock pumps imported for use with machines for making cellulosic pulp, paper or paperboard
No. Free
8413.70.20 Other
Free
8413.70.20.04 Submersible pumps
No. Other:
Single-stage, single-suction, close-coupled:
8413.70.20.05 With discharge outlet under 5.08 cm in diameter
No. 8413.70.20.15 With discharge outlet 5.08 cm or over in diameter
No. Single-stage, single-suction, frame- mounted:
8413.70.20.22 With discharge outlet under 7.6 cm in diameter
No. 8413.70.20.25 With discharge outlet 7.6 cm or over in diameter
No. 8413.70.20.30 Single-stage, double-suction
No. 8413.70.20.40 Multi-stage, single- or double-suction
No. 8413.70.20.90 Other
No. Other pumps; liquid elevators:
8413.81.00 Pumps
Free
8413.81.00.20 Turbine pumps
No. 8413.81.00.30 Household water systems, self-contained; and windmill pumps
No. 8413.81.00.40 Other
No. 8413.82.00.00 Liquid elevators
No. Free
Parts:
8413.91 Of pumps:
8413.91.10.00 Of fuel-injection pumps for compression-ignition engines
kg 2.5%
8413.91.20.00 Of stock pumps imported for use with machines for making cellulosic pulp, paper or paperboard
kg Free
8413.91.90 Other
Free
8413.91.90.10 Of subheading 8413.30.90
kg Of hydraulic fluid power pumps:
8413.91.90.55 Fluid end blocks
No. 8413.91.90.60 Other
kg Of subheading 8413.50.00:
8413.91.90.65 Sucker rods of a kind described in statistical note 3 to this chapter
kg 8413.91.90.85 Other
kg 8413.91.90.96 Other
kg 8413.92.00.00 Of liquid elevators
kg Free
8414 Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters; gas-tight biological safety cabinets, whether or not fitted with filters; parts thereof:
8414.10.00.00 Vacuum pumps
No. 2.5%
8414.20.00.00 Hand- or foot-operated air pumps
No. 3.7%
8414.30 Compressors of a kind used in refrigerating equipment (including air conditioning):
8414.30.40.00 Not exceeding 1/4 horsepower
No. Free
8414.30.80 Other
Free
Screw type:
8414.30.80.10 Not exceeding 200 horsepower
No. 8414.30.80.20 Exceeding 200 horsepower
No. Other:
For all refrigerants except ammonia
8414.30.80.30 For motor vehicles
No. Other:
8414.30.80.50 Exceeding 1/4 horsepower but not exceeding 1 horsepower
No. 8414.30.80.60 Exceeding 1 horsepower but not exceeding 3 horsepower
No. 8414.30.80.70 Exceeding 3 horsepower but not exceeding 10 horsepower
No. 8414.30.80.80 Exceeding 10 horsepower
No. 8414.30.80.90 For ammonia
No. 8414.40.00.00 Air compressors mounted on a wheeled chassis for towing
No. 2.7%
Fans:
8414.51 Table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output not exceeding 125 W:
8414.51.30.00 Ceiling fans for permanent installation
No. 4.7%
8414.51.90 Other
4.7%
8414.51.90.60 For permanent installation
No. 8414.51.90.90 Other
No. 8414.59 Other:
8414.59.10.00 Blowers for pipe organs
No. Free
8414.59.15.00 Fans of a kind used solely or principally for cooling microprocessors, telecommunications apparatus, automatic data processing machines or units of automatic data processing machines
No. Free
Other
8414.59.30.00 Turbochargers and superchargers
No. 2.3%
8414.59.65 Other
2.3%
8414.59.65.40 Suitable for use with motor vehicles
No. Other:
8414.59.65.60 Centrifugal
No. 8414.59.65.90 Axial
No. 8414.59.65.95 Other
No. 8414.60.00.00 Hoods having a maximum horizontal side not exceeding 120 cm
No. Free
8414.70.00.00 Gas-tight biological safety cabinets
No. Free
8414.80 Other, except parts:
Air compressors:
8414.80.05.00 Turbochargers and superchargers
No. Free
8414.80.16 Other
Free
Stationary:
Reciprocating:
8414.80.16.05 Not exceeding 746 W
No. 8414.80.16.15 Exceeding 746 W but not exceeding 4.48 kW
No. 8414.80.16.25 Exceeding 4.48 kW but not exceeding 8.21 kW
No. 8414.80.16.35 Exceeding 8.21 kW but not exceeding 11.19 kW
No. 8414.80.16.40 Exceeding 11.19 kW but not exceeding 19.4 kW
No. 8414.80.16.45 Exceeding 19.4 kW but not exceeding 74.6 kW
No. 8414.80.16.55 Exceeding 74.6 kW
No. Rotary:
8414.80.16.60 Not exceeding 11.19 kW
No. 8414.80.16.65 Exceeding 11.19 kW but under 22.38 kW
No. 8414.80.16.70 22.38 kW and over but not exceeding 74.6 kW
No. 8414.80.16.75 Exceeding 74.6 kW
No. 8414.80.16.80 Other
No. Portable:
8414.80.16.85 Under 0.57 cubic meters per minute
No. 8414.80.16.90 Other
No. 8414.80.20 Other compressors
Free
8414.80.20.05 Refrigerant recovery units
No. Other:
8414.80.20.15 Centrifugal and axial
No. Other, including reciprocating and rotary:
8414.80.20.55 Not exceeding 186.5 kW
No. 8414.80.20.65 Exceeding 186.5 kW but not exceeding 746 kW
No. 8414.80.20.75 Exceeding 746 kW
No. 8414.80.90.00 Other
No. 3.7%
8414.90 Parts:
8414.90.10 Of fans (including blowers) and ventilating or recycling hoods
4.7%
8414.90.10.40 Of fans of subheading 8414.51
kg 8414.90.10.80 Other
kg Of compressors:
8414.90.30.00 Stators and rotors of goods of subheading 8414.30
No. Free
8414.90.41 Other
Free
Of refrigerating and air conditioning compressors:
8414.90.41.20 Compressor housings
No. 8414.90.41.40 Other
kg Other:
Of compressors of subheading 8414.40:
8414.90.41.45 Compressor housings
No. 8414.90.41.55 Other
kg Other:
8414.90.41.65 Compressor housings
No. 8414.90.41.80 Impeller covers and hubs
No. 8414.90.41.90 Other
kg 8414.90.91 Other
Free
8414.90.91.40 Of vacuum pumps
kg 8414.90.91.80 Other
kg 8415 Air conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulated; parts thereof:
8415.10 Of a kind designed to be fixed to a window, wall, ceiling or floor, self-contained or “split system”:
8415.10.30 Self-contained
Free
8415.10.30.40 Less than 2.93 kW per hour
No. 8415.10.30.60 2.93 kW per hour or greater but less than 4.98 kW per hour
No. 8415.10.30.80 4.98 kW per hour or greater
No. Other:
8415.10.60.00 Incorporating a refrigerating unit and a valve for reversal of the cooling/heat cycle (reversible heat pumps)
No. 1%
8415.10.90.00 Other
No. 2.2%
8415.20.00.00 Of a kind used for persons, in motor vehicles
No. 1.4%
Other, except parts:
8415.81.01 Incorporating a refrigerating unit and a valve for reversal of the cooling/heat cycle (reversible heat pumps)
1%
Self-contained:
8415.81.01.10 Not exceeding 17.58 kW per hour
No. 8415.81.01.20 Exceeding 17.58 kW per hour
No. 8415.81.01.30 Other
No. 8415.82.01 Other, incorporating a refrigerating unit
2.2%
Self-contained machines and remote condenser type air conditioners other than year-round units:
8415.82.01.05 Not exceeding 17.58 kW per hour
No. 8415.82.01.10 Exceeding 17.58 kW per hour
No. Year-round units (heating and cooling):
8415.82.01.15 Not exceeding 17.58 kW per hour
No. 8415.82.01.20 Exceeding 17.58 kW per hour
No. Room or central station air conditioning units for use with water chillers:
8415.82.01.30 Room fan coil units
No. 8415.82.01.35 Central station air handlers
No. 8415.82.01.40 Other
No. Dehumidifiers:
8415.82.01.55 With a rated water removal capacity of less than 35 liters over a 24 hour period
No. 8415.82.01.60 Other
No. 8415.82.01.70 Other air conditioning machines incorporating a refrigerating unit
No. 8415.83.00 Not incorporating a refrigerating unit
1.4%
Heat exchangers including condensing units:
Condensing units:
8415.83.00.50 Not exceeding 17.58 kW per hour
No. 8415.83.00.60 Exceeding 17.58 kW per hour
No. 8415.83.00.70 Other
No. 8415.83.00.90 Other air conditioning machines not incorporating a refrigerating unit
No. 8415.90 Parts:
8415.90.40.00 Chassis, chassis bases and outer cabinets
No. 1.4%
8415.90.80 Other
1.4%
8415.90.80.25 Air conditioning evaporator coils
No. Other:
8415.90.80.45 Of automotive air conditioners
kg 8415.90.80.65 Of heat pumps
kg 8415.90.80.85 Other
kg 8416 Furnace burners for liquid fuel, for pulverized solid fuel or for gas; mechanical stokers, including their mechanical grates, mechanical ash dischargers and similar appliances; parts thereof:
8416.10.00.00 Furnace burners for liquid fuel
No. Free
8416.20.00 Other furnace burners, including combination burners
Free
8416.20.00.40 Gas burners
No. 8416.20.00.80 Other
No. 8416.30.00.00 Mechanical stokers, including their mechanical grates, mechanical ash dischargers and similar appliances
No. Free
8416.90.00.00 Parts
kg Free
8417 Industrial or laboratory furnaces and ovens, including incinerators, nonelectric, and parts thereof:
8417.10.00.00 Furnaces and ovens for the roasting, melting or other heat treatment of ores, pyrites or of metals
No. 2.9%
8417.20.00.00 Bakery ovens, including biscuit ovens
No. 3.5%
8417.80.00.00 Other, except parts
No. 3.9%
8417.90.00.00 Parts
kg 3.9%
8418 Refrigerators, freezers and other refrigerating or freezing equipment, electric or other; heat pumps, other than the air conditioning machines of heading 8415; parts thereof:
8418.10.00 Combined refrigerator-freezers, fitted with separate external doors or drawers, or combinations thereof
Free
Compression type:
8418.10.00.10 Having a refrigerated volume of under 184 liters
No. 8418.10.00.20 Having a refrigerated volume of 184 liters and over but under 269 liters
No. 8418.10.00.30 Having a refrigerated volume of 269 liters and over but under 382 liters
No. Having a refrigerated volume of 382 liters and over:
French door refrigerators with a bottom freezer compartment:
Of a width exceeding 87 centimeters but not exceeding 95 centimeters:
8418.10.00.45 Having an external depth (excluding door handles) not exceeding 73 centimeters
No. 8418.10.00.55 Other
No. 8418.10.00.65 Other
No. 8418.10.00.80 Refrigerators with a top freezer compartment
No. 8418.10.00.85 Other
No. 8418.10.00.90 Other
No. Refrigerators, household type:
8418.21.00 Compression type
Free
8418.21.00.10 Having a refrigerated volume of under 184 liters
No. 8418.21.00.20 Having a refrigerated volume of 184 liters and over but under 269 liters
No. 8418.21.00.30 Having a refrigerated volume of 269 liters and over but under 382 liters
No. 8418.21.00.90 Having a refrigerated volume of 382 liters and over
No. 8418.29 Other:
8418.29.10.00 Absorption type, electrical
No. 1%
8418.29.20.00 Other
No. 1.9%
8418.30.00.00 Freezers of the chest type, not exceeding 800 liters capacity
No. Free
8418.40.00.00 Freezers of the upright type, not exceeding 900 liters capacity
No. Free
8418.50.00 Other furniture (chests, cabinets, display counters, show-cases and the like) for storage and display, incorporating refrigerating or freezing equipment
Free
8418.50.00.40 Freezing
No. 8418.50.00.80 Other
No. Other refrigerating or freezing equipment; heat pumps:
8418.61.01.00 Heat pumps other than air conditioning machines of heading 8415
No. Free
8418.69.01 Other
Free
8418.69.01.10 Icemaking machines
No. 8418.69.01.20 Drinking water coolers, self-contained
No. 8418.69.01.30 Soda fountain and beer dispensing equipment
No. 8418.69.01.40 Centrifugal liquid chilling refrigerating units
No. 8418.69.01.50 Reciprocating liquid chilling refrigerating units
No. 8418.69.01.60 Absorption liquid chilling units
No. 8418.69.01.80 Other refrigerating or freezing equipment
No. Parts:
8418.91.00.00 Furniture designed to receive refrigerating or freezing equipment
No. Free
8418.99 Other:
8418.99.40.00 Door assemblies incorporating more than one of the following: inner panel; outer panel; insulation; hinges; handles
No. Free
8418.99.80 Other
Free
Refrigeration condensing units:
8418.99.80.05 Not exceeding 746 W
No. 8418.99.80.10 Exceeding 746 W but not exceeding 2.2 kW
No. 8418.99.80.15 Exceeding 2.2 kW but not exceeding 7.5 kW
No. 8418.99.80.20 Exceeding 7.5 kW but not exceeding 22.3 kW
No. 8418.99.80.25 Exceeding 22.3 kW
No. Other:
8418.99.80.50 Parts of combined refrigerator-freezers fitted with separate external doors and parts of household type refrigerators
kg 8418.99.80.60 Other
kg 8419 Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilizing, pasteurizing, steaming, drying, evaporating, vaporizing, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, nonelectric; parts thereof:
Instantaneous or storage water heaters, nonelectric:
8419.11.00.00 Instantaneous gas water heaters
No. Free
8419.12.00.00 Solar water heaters
No. Free
8419.19.01 Other
Free
8419.19.01.20 Instantaneous water heaters
No. 8419.19.01.60 Other
No. 8419.20.00 Medical, surgical or laboratory sterilizers
Free
8419.20.00.10 Medical or surgical sterilizers
No. 8419.20.00.20 Laboratory sterilizers
No. Dryers:
8419.33 Lyophilisation apparatus, freeze drying units and spray dryers:
8419.33.10.00 For agricultural products
No. Free
8419.33.50.00 Other
No. Free
8419.34.00.00 Other, for agricultural products
No. Free
8419.35 Other, for wood, paper pulp, paper or paperboard
8419.35.10.00 For wood
No. Free
8419.35.50.00 Other
No. Free
8419.39.02 Other
Free
8419.39.02.70 For foods and beverages
No. 8419.39.02.80 Other
No. 8419.40.00 Distilling or rectifying plant
Free
8419.40.00.40 For food and beverages
No. 8419.40.00.80 Other
No. 8419.50 Heat exchange units:
8419.50.10.00 Brazed aluminum plate-fin heat exchangers
No. 4.2%
8419.50.50.00 Other
No. Free
8419.60 Machinery for liquefying air or other gases:
8419.60.10.00 Machinery containing brazed aluminum plate-fin heat exchangers
No. 4.2%
8419.60.50.00 Other
No. Free
Other machinery, plant or equipment:
8419.81 For making hot drinks or for cooking or heating food:
8419.81.50 Cooking stoves, ranges and ovens
Free
8419.81.50.40 For use in civil aircraft
No. 8419.81.50.80 Other
No. 8419.81.90 Other
Free
8419.81.90.40 Of a type used in restaurants, hotels or similar locations
No. 8419.81.90.80 Other
No. 8419.89 Other:
8419.89.10.00 For making paper pulp, paper or paperboard
No. Free
Other:
8419.89.60.00 Molten-salt-cooled acrylic acid reactors
No. Free
8419.89.95 Other
4.2%
Designed for cooling:
8419.89.95.20 For food and beverages
No. 8419.89.95.40 Other
No. Other:
8419.89.95.60 For food and beverages
No. 8419.89.95.80 For rubber and plastics
No. 8419.89.95.85 For other materials
No. 8419.90 Parts:
8419.90.10.00 Of instantaneous or storage water heaters
kg Free
8419.90.20.00 Of machinery and plant for making paper pulp, paper or paperboard
kg Free
8419.90.30.00 Of heat exchange units
kg Free
Other:
8419.90.50 Of molten-salt-cooled acrylic acid reactors; of medical, surgical or laboratory sterilizers
Free
8419.90.50.40 Of medical, surgical or laboratory sterilizers
kg 8419.90.50.80 Other
kg 8419.90.85.00 Of electromechanical tools for working in the hand with self-contained electric motor
kg Free
8419.90.95 Other
4%
8419.90.95.20 Of an apparatus of a type used in restaurants, hotels or similar locations
kg 8419.90.95.80 Other
kg 8420 Calendering or other rolling machines, other than for metals or glass, and cylinders therefor; parts thereof:
8420.10 Calendering or other rolling machines:
8420.10.10.00 Textile calendering or rolling machines
No. 3.5%
8420.10.20.00 Calendering or similar rolling machines for making paper pulp, paper or paperboard
No. Free
8420.10.90 Other
Free
8420.10.90.40 Calendering or other rolling machines for rubber and plastics
No. 8420.10.90.80 Other
No. Parts:
8420.91 Cylinders:
8420.91.10.00 For textile calendering or rolling machines
No. 2.6%
8420.91.20.00 For calendering or other rolling machines for machines for making paper pulp, paper or paperboard
No. Free
8420.91.90.00 Other
No. Free
8420.99 Other:
8420.99.10.00 Of machines for processing textiles
kg 3.5%
8420.99.20.00 Of machines for making paper pulp, paper or paperboard
kg Free
8420.99.90.00 Other
kg Free
8421 Centrifuges, including centrifugal dryers; filtering or purifying machinery and apparatus, for liquids or gases; parts thereof:
Centrifuges, including centrifugal dryers:
8421.11.00.00 Cream separators
No. Free
8421.12.00.00 Clothes-dryers
No. Free
8421.19.00.00 Other
No. 1.3%
Filtering or purifying machinery and apparatus for liquids:
8421.21.00.00 For filtering or purifying water
No. Free
8421.22.00.00 For filtering or purifying beverages other than water
No. Free
8421.23.00.00 Oil or fuel filters for internal combustion engines
No. 2.5%
8421.29.00 Other
Free
8421.29.00.05 Refrigerant recovery and recycling units
No. Other:
8421.29.00.15 Oil-separation equipment
No. Other:
8421.29.00.40 Hydraulic fluid power filters, rated at 1,000 kPa or greater
No. 8421.29.00.65 Other
No. Filtering or purifying machinery and apparatus for gases:
8421.31.00.00 Intake air filters for internal combustion engines
No. 2.5%
8421.32.00.00 Catalytic converters or particulate filters, whether or not combined, for purifying or filtering exhaust gases from internal combustion engines
No. Free
8421.39.01 Other
Free
Dust collection and air purification equipment:
8421.39.01.05 For machine tools of headings 8456 through 8465, inclusive
kg 8421.39.01.15 Other
kg Other:
Industrial gas cleaning equipment:
8421.39.01.20 Electrostatic precipitators
No. 8421.39.01.30 Other
No. 8421.39.01.40 Gas separation equipment
No. Other:
8421.39.01.60 Pneumatic fluid power filters, rated at 550 kPa or greater
No. 8421.39.01.90 Other
kg Parts:
8421.91 Of centrifuges, including centrifugal dryers:
8421.91.20.00 Drying chambers for the clothes-dryers of subheading 8421.12 and other parts of clothes-dryers incorporating drying chambers
No. Free
8421.91.40.00 Furniture designed to receive the clothes-dryers of subheading 8421.12
No. Free
8421.91.60.00 Other
kg Free
8421.99.01 Other
Free
8421.99.01.40 Parts of machinery and apparatus for filtering or purifying water
kg 8421.99.01.80 Other
kg 8422 Dishwashing machines; machinery for cleaning or drying bottles or other containers; machinery for filling, closing, sealing or labeling bottles, cans, boxes, bags or other containers; machinery for capsuling bottles, jars, tubes and similar containers; other packing or wrapping machinery (including heat-shrink wrapping machinery); machinery for aerating beverages; parts thereof:
Dishwashing machines:
8422.11.00.00 Of the household type
No. 2.4%
8422.19.00.00 Other
No. Free
8422.20.00.00 Machinery for cleaning or drying bottles or other containers
No. Free
8422.30 Machinery for filling, closing, sealing or labeling bottles, cans, boxes, bags or other containers; machinery for capsuling bottles, jars, tubes and similar containers; machinery for aerating beverages:
8422.30.11.00 Can-sealing machines
No. Free
8422.30.91 Other
Free
8422.30.91.10 Machines for aerating beverages
No. 8422.30.91.20 Labeling machines
No. Other:
Machinery for filling, closing, sealing, capsuling or labeling bottles, cans or similar containers:
Machines for filling, whether or not capable of performing other operations:
8422.30.91.30 Vacuum or gas packaging
No. 8422.30.91.40 Other
No. Machines which perform only the following operations: capping, lidding, sealing or closing:
8422.30.91.50 Vacuum or gas packaging
No. 8422.30.91.60 Other
No. 8422.30.91.70 Other
No. Machinery for filling, closing, sealing, capsuling or labeling boxes, bags or similar containers:
8422.30.91.80 Machines for opening, filling and closing bags
No. 8422.30.91.85 Machines for forming, filling and sealing bags/pouches
No. 8422.30.91.86 Machines for opening, filling and closing boxes
No. 8422.30.91.87 Machines for skin and blister packaging
No. 8422.30.91.91 Other
No. 8422.40 Other packing or wrapping machinery (including heat-shrink wrapping machinery):
8422.40.11 Machines for packaging pipe tobacco; machines for wrapping candy; machines for wrapping cigarette packages; and combination candy cutting and wrapping machines
Free
8422.40.11.10 Machines for wrapping candy
No. 8422.40.11.90 Other
No. 8422.40.91 Other
Free
8422.40.91.40 Strapping machines
No. 8422.40.91.50 Machines for case and tray forming, packing, unpacking, closing and sealing
No. 8422.40.91.60 Machines for shrink film and heat sealing
No. 8422.40.91.70 Machines for wrapping
No. 8422.40.91.81 Other
No. 8422.90 Parts:
Of dishwashing machines:
8422.90.02.00 Water containment chambers for the dishwashing machines of subheading 8422.11 and other parts of dishwashing machines of the household type incorporating water containment chambers
No. Free
8422.90.04.00 Door assemblies for the dishwashing machines of subheading 8422.11
No. Free
8422.90.06 Other
Free
8422.90.06.40 Of the household type
kg 8422.90.06.80 Other
kg 8422.90.11.00 Of can-sealing machines
kg Free
8422.90.21.00 Of machines for packaging pipe tobacco, wrapping candy or wrapping cigarette packages, and of combination candy cutting and wrapping machines
kg Free
8422.90.91 Other
Free
8422.90.91.20 Of machinery for cleaning or drying bottles or other containers
kg Other:
8422.90.91.30 Of strapping machines
kg 8422.90.91.60 Of other wrapping and packaging machines
kg 8422.90.91.95 Other
kg 8423 Weighing machinery (excluding balances of a sensitivity of 5 cg or better), including weight-operated counting or checking machines; weighing machine weights of all kinds; parts of weighing machinery:
8423.10.00 Personal weighing machines, including baby scales; household scales
Free
8423.10.00.10 Digital electronic type
No. Other:
8423.10.00.30 Of a kind suitable for carrying on the person
No. 8423.10.00.60 Other
No. 8423.20 Scales for continuous weighing of goods on conveyors:
8423.20.10.00 Using electronic means for gauging weights
No. Free
8423.20.90.00 Other
No. 2.9%
8423.30.00.00 Constant-weight scales and scales for discharging a predetermined weight of material into a bag or container, including hopper scales
No. Free
Other weighing machinery:
8423.81.00 Having a maximum weighing capacity not exceeding 30 kg
Free
Digital electronic type:
8423.81.00.10 Counting scales
No. 8423.81.00.20 Retail scales, non-computing
No. 8423.81.00.30 Retail scales, computing
No. 8423.81.00.40 Other
No. 8423.81.00.50 Other
No. 8423.82.00 Having a maximum weighing capacity exceeding 30 kg but not exceeding 5,000 kg
Free
8423.82.00.10 Digital electronic type
No. 8423.82.00.50 Other
No. 8423.89 Other:
8423.89.10.00 Using electronic means for gauging
No. Free
8423.89.90.00 Other
No. 2.9%
8423.90 Weighing machine weights of all kinds; parts of weighing machinery:
8423.90.10.00 Parts of weighing machinery using electronic means for gauging weight, excluding parts of machines for weighing motor vehicles
kg Free
8423.90.90.00 Other
kg 2.8%
8424 Mechanical appliances (whether or not hand operated) for projecting, dispersing or spraying liquids or powders; fire extinguishers, whether or not charged; spray guns and similar appliances; steam or sand blasting machines and similar jet projecting machines; parts thereof:
8424.10.00.00 Fire extinguishers, whether or not charged
No. Free
8424.20 Spray guns and similar appliances:
8424.20.10.00 Simple piston pump sprays and powder bellows
No. 2.9%
8424.20.90.00 Other
kg Free
8424.30 Steam or sand blasting machines and similar jet projecting machines:
8424.30.10.00 Sand blasting machines
No. Free
8424.30.90.00 Other
kg Free
Agricultural or horticultural sprayers:
8424.41 Portable sprayers:
8424.41.10.00 Sprayers (except sprayers, self-contained, having a capacity not over 20 liters)
No. Free
8424.41.90.00 Other
No. 2.4%
8424.49.00.00 Other
No. 2.4%
Other appliances:
8424.82.00 Agricultural or horticultural
2.4%
Irrigation equipment:
8424.82.00.10 Self-propelled, center pivot
No. 8424.82.00.20 Other
No. 8424.82.00.90 Other
No. 8424.89.10.00 Mechanical appliances for projecting, dispersing or spraying, of a kind used solely or principally for the manufacture of printed circuits or printed circuit assemblies
No. Free
8424.89.90.00 Other
No. 1.8%
8424.90 Parts:
8424.90.05.00 Of fire extinguishers
kg Free
8424.90.10.00 Of simple piston pump sprays and powder bellows
kg 2.9%
8424.90.20.00 Of sand blasting machines
kg Free
8424.90.90 Other
Free
8424.90.90.40 Of steam and similar jet projecting machines
kg 8424.90.90.80 Other
kg 8425 Pulley tackle and hoists other than skip hoists; winches and capstans; jacks:
Pulley tackle and hoists other than skip hoists or hoists of a kind used for raising vehicles:
8425.11.00.00 Powered by electric motor
No. Free
8425.19.00.00 Other
No. Free
Winches; capstans:
8425.31.01.00 Powered by electric motor
No. Free
8425.39.01.00 Other
No. Free
Jacks; hoists of a kind used for raising vehicles:
8425.41.00.00 Built-in jacking systems of a type used in garages
No. Free
8425.42.00.00 Other jacks and hoists, hydraulic
No. Free
8425.49.00.00 Other
No. Free
8426 Ships' derricks; cranes, including cable cranes; mobile lifting frames, straddle carriers and works trucks fitted with a crane:
Overhead traveling cranes, transporter cranes, gantry cranes, bridge cranes, mobile lifting frames and straddle carriers:
8426.11.00.00 Overhead traveling cranes on fixed support
No. Free
8426.12.00.00 Mobile lifting frames on tires and straddle carriers
No. Free
8426.19.00.00 Other
No. Free
8426.20.00.00 Tower cranes
No. Free
8426.30.00.00 Portal or pedestal jib cranes
No. Free
Other machinery, self-propelled:
8426.41.00 On tires
Free
8426.41.00.05 Works trucks fitted with a crane
No. Other:
8426.41.00.10 Cable operated
No. 8426.41.00.90 Other
No. 8426.49.00 Other
Free
8426.49.00.10 Cable operated
No. 8426.49.00.90 Other
No. Other machinery:
8426.91.00.00 Designed for mounting on road vehicles
No. Free
8426.99.00.00 Other
No. Free
8427 Fork-lift trucks; other works trucks fitted with lifting or handling equipment:
8427.10 Self-propelled trucks powered by an electric motor:
8427.10.40.00 Rider-type, counterbalanced fork-lift trucks
No. Free
8427.10.80 Other
Free
Operator riding:
8427.10.80.20 Aerial work platforms of a kind described in statistical note 4 to this chapter
No. 8427.10.80.30 Other
No. Automated guided vehicle (AGV):
8427.10.80.40 Aerial work platforms of a kind described in statistical note 4 to this chapter
No. 8427.10.80.50 Other
No. Other:
8427.10.80.70 Aerial work platforms of a kind described in statistical note 4 to this chapter
No. 8427.10.80.95 Other
No. 8427.20 Other self-propelled trucks:
8427.20.40.00 Rider-type, counterbalanced fork-lift trucks
No. Free
8427.20.80 Other
Free
8427.20.80.20 Aerial work platforms of a kind described in statistical note 4 to this chapter
No. 8427.20.80.90 Other
No. 8427.90.00 Other trucks
Free
8427.90.00.20 Aerial work platforms of a kind described in statistical note 4 to this chapter
No. 8427.90.00.90 Other
No. 8428 Other lifting, handling, loading or unloading machinery (for example, elevators, escalators, conveyors, teleferics):
8428.10.00.00 Passenger or freight elevators other than continuous action; skip hoists
No. Free
8428.20.00 Pneumatic elevators and conveyors
Free
8428.20.00.10 Conveyors
No. 8428.20.00.50 Elevators
No. Other continuous-action elevators and conveyors, for goods or materials:
8428.31.00.00 Specially designed for underground use
No. Free
8428.32.00.00 Other, bucket type
No. Free
8428.33.00.00 Other, belt type
No. Free
8428.39.00.00 Other
No. Free
8428.40.00.00 Escalators and moving walkways
No. Free
8428.60.00.00 Teleferics, chair lifts, ski draglines; traction mechanisms for funiculars
No. Free
8428.70.00.00 Industrial robots
No. Free
8428.90.03 Other machinery
Free
8428.90.03.10 Woodland log handling equipment (other than skidders)
No. 8428.90.03.90 Other
No. 8429 Self-propelled bulldozers, angledozers, graders, levelers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers:
Bulldozers and angledozers:
8429.11.00 Track laying
Free
8429.11.00.10 New
No. 8429.11.00.90 Used or rebuilt
No. 8429.19.00 Other
Free
8429.19.00.10 New
No. 8429.19.00.90 Used or rebuilt
No. 8429.20.00.00 Graders and levelers
No. Free
8429.30.00 Scrapers
Free
New:
8429.30.00.20 Not exceeding 13.7 m3
No. 8429.30.00.40 Exceeding 13.7 m3
No. 8429.30.00.60 Used or rebuilt
No. 8429.40.00 Tamping machines and road rollers
Free
New:
8429.40.00.20 Vibratory
No. 8429.40.00.40 Other
No. 8429.40.00.60 Used or rebuilt
No. Mechanical shovels, excavators and shovel loaders:
8429.51 Front-end shovel loaders:
8429.51.10 Wheel-type
Free
New:
Integral tractor shovel loaders, rear engine mounted:
8429.51.10.05 2 wheel drive
No. 4 wheel drive with a bucket capacity of:
8429.51.10.15 Under 1.5 m3
No. 8429.51.10.25 At least 1.5 m3 but under 2.2 m3
No. 8429.51.10.30 At least 2.2 m3 but under 2.9 m3
No. 8429.51.10.35 At least 2.9 m3 but under 3.8 m3
No. 8429.51.10.40 At least 3.8 m3 but under 5.2 m3
No. 8429.51.10.45 At least 5.2 m3 but under 7.6 m3
No. 8429.51.10.50 At least 7.6 m3 but under 11.4 m3
No. 8429.51.10.55 11.4 m3 and over
No. 8429.51.10.60 Other
No. 8429.51.10.65 Used or rebuilt
No. 8429.51.50 Other
Free
New:
8429.51.50.10 Less than 44.7 kW
No. 8429.51.50.20 At least 44.7 kW but under 67.1 kW
No. 8429.51.50.30 At least 67.1 kW but under 93.2 kW
No. 8429.51.50.40 At least 93.2 kW but under 119.3 kW
No. 8429.51.50.50 119.3 kW and over
No. 8429.51.50.60 Used or rebuilt
No. 8429.52 Machinery with a 360˚ revolving superstructure:
8429.52.10 Backhoes, shovels, clamshells and draglines
Free
New:
Crawler mounted:
8429.52.10.10 Hydraulic
No. 8429.52.10.20 Other
No. Other:
8429.52.10.30 Hydraulic
No. 8429.52.10.40 Other
No. 8429.52.10.50 Used or rebuilt
No. 8429.52.50 Other
Free
8429.52.50.10 New
No. 8429.52.50.90 Used or rebuilt
No. 8429.59 Other:
8429.59.10 Backhoes, shovels, clamshells and draglines
Free
New:
8429.59.10.30 Backhoes
No. 8429.59.10.60 Other
No. 8429.59.10.90 Used or rebuilt
No. 8429.59.50 Other
Free
New:
Ditchers and trenchers:
8429.59.50.20 Ladder type
No. 8429.59.50.40 Other
No. 8429.59.50.60 Other
No. 8429.59.50.80 Used or rebuilt
No. 8430 Other moving, grading, leveling, scraping, excavating, tamping, compacting, extracting or boring machinery, for earth, minerals or ores; pile-drivers and pile-extractors; snowplows and snowblowers:
8430.10.00.00 Pile-drivers and pile-extractors
No. Free
8430.20.00 Snowplows and snowblowers
Free
Snowblowers:
8430.20.00.30 Attachment type
No. 8430.20.00.60 Other
No. 8430.20.00.90 Other
No. Coal or rock cutters and tunneling machinery:
8430.31.00 Self-propelled
Free
8430.31.00.40 Rock breaking machines
No. 8430.31.00.80 Other
No. 8430.39.00 Other
Free
8430.39.00.40 Rock breaking machines
No. 8430.39.00.80 Other
No. Other boring or sinking machinery:
8430.41.00.00 Self-propelled
No. Free
8430.49 Other:
8430.49.40.00 Offshore oil and natural gas drilling and production platforms
kg Free
8430.49.80 Other
Free
For oil well and gas field drilling:
8430.49.80.10 Rotary
No. 8430.49.80.20 Other
No. For water well drilling:
8430.49.80.30 Rotary
No. 8430.49.80.40 Other
No. 8430.49.80.50 Other
No. 8430.50 Other machinery, self-propelled:
8430.50.10.00 Peat excavators
No. Free
8430.50.50.00 Other
No. Free
Other machinery, not self-propelled:
8430.61.00.00 Tamping or compacting machinery
No. Free
8430.69.01.00 Other
No. Free
8431 Parts suitable for use solely or principally with the machinery of headings 8425 to 8430:
8431.10.00 Of machinery of heading 8425
Free
8431.10.00.10 Of machinery of subheading 8425.11 or 8425.19
No. 8431.10.00.90 Other
No. 8431.20.00.00 Of machinery of heading 8427
No. Free
Of machinery of heading 8428:
8431.31.00 Of passenger or freight elevators other than continuous action, skip hoists or escalators
Free
8431.31.00.20 Of skip hoists
No. 8431.31.00.40 Of escalators
No. 8431.31.00.60 Other
No. 8431.39.00 Other
Free
8431.39.00.10 Of elevators and conveyors
No. Other:
8431.39.00.50 Of oil and gas field machinery
No. 8431.39.00.70 Of the woodland log handling equipment of statistical reporting number 8428.90.0310
No. 8431.39.00.80 Other
No. Of machinery of heading 8426, 8429 or 8430:
8431.41.00 Buckets, shovels, grabs and grips
Free
8431.41.00.20 Shovel attachments
No. 8431.41.00.40 Clamshell (grappler) attachments
No. 8431.41.00.60 Dragline buckets
No. 8431.41.00.80 Other
No. 8431.42.00.00 Bulldozer or angledozer blades
No. Free
8431.43 Parts for boring or sinking machinery of subheading 8430.41 or 8430.49:
8431.43.40.00 Of offshore oil and natural gas drilling and production platforms
No. Free
8431.43.80 Other
Free
Of oil and gas field machinery:
8431.43.80.20 Tool joints, whether or not forged
No. 8431.43.80.40 Drill pipe fitted with tool joints
No. 8431.43.80.60 Other
No. 8431.43.80.90 Of other boring or sinking machinery
No. 8431.49 Other:
8431.49.10 Of machinery of heading 8426
Free
8431.49.10.10 Of machinery of subheadings 8426.11, 8426.19 and 8426.30
No. 8431.49.10.60 Of mobile lifting frames, straddle carriers and works trucks fitted with a crane
No. 8431.49.10.90 Other
No. 8431.49.90 Other
Free
Attachments for mounting on machinery:
8431.49.90.05 Backhoe attachments
No. 8431.49.90.10 Front-end loader attachments
No. 8431.49.90.15 Rippers and rooters
No. 8431.49.90.20 Other
No. Other:
Parts of coal or rock cutters and tunneling machinery:
8431.49.90.25 Cast axle housings
No. 8431.49.90.30 Other
No. Parts of backhoes, shovels, clamshells and draglines:
8431.49.90.35 Cast axle housings
No. Other:
8431.49.90.36 Road wheels
No. 8431.49.90.38 Wheel and tire assemblies
No. 8431.49.90.44 Other
No. Other:
8431.49.90.45 Scraper bowls for scrapers of subheadings 8429.30 and 8430.69.01
No. 8431.49.90.50 Track links
No. 8431.49.90.55 Cast axle housings
No. Other:
8431.49.90.81 Steel forgings
kg Other:
8431.49.90.84 Road wheels
No. 8431.49.90.90 Wheel and tire assemblies
No. 8431.49.90.95 Other
No. 8432 Agricultural, horticultural or forestry machinery for soil preparation or cultivation; lawn or sports ground rollers; parts thereof:
8432.10.00 Plows
Free
8432.10.00.20 Moldboard plows except listers
No. 8432.10.00.40 Disc plows
No. 8432.10.00.60 Other
No. Harrows, scarifiers, cultivators, weeders and hoes:
8432.21.00.00 Disc harrows
No. Free
8432.29.00 Other
Free
Cultivators, weeders and hoes:
8432.29.00.40 Cultivators, tractor drawn or for tractor mounting
No. 8432.29.00.60 Walk behind rotary tillers
No. 8432.29.00.80 Other
No. 8432.29.00.90 Other
No. Seeders, planters and transplanters
8432.31.00 No-till direct seeders, planters and transplanters
Free
8432.31.00.10 Planters and transplanters
No. 8432.31.00.90 Seeders
No. 8432.39.00 Other
Free
8432.39.00.10 Planters and transplanters
No. 8432.39.00.90 Seeders
No. Manure spreaders and fertilizer distributors:
8432.41.00.00 Manure spreaders
No. Free
8432.42.00.00 Fertilizer distributors
No. Free
8432.80.00 Other machinery
Free
8432.80.00.10 Tow behind spreaders, aerators, and de- thatchers
No. 8432.80.00.80 Other
No. 8432.90.00 Parts
Free
8432.90.00.10 Road wheels without tires
No. 8432.90.00.20 Wheel and tire assemblies
No. Other:
8432.90.00.40 Of plows
No. 8432.90.00.50 Of harrows, scarifiers, cultivators, weeders and hoes
No. 8432.90.00.60 Of seeders, planters, transplanters, manure spreaders and fertilizer distributors
No. 8432.90.00.81 Of other machinery
No. 8433 Harvesting or threshing machinery, including straw or fodder balers; grass or hay mowers; machines for cleaning, sorting or grading eggs, fruit or other agricultural produce, other than machinery of heading 8437; parts thereof:
Mowers for lawns, parks or sports grounds:
8433.11.00 Powered, with the cutting device rotating in a horizontal plane
Free
8433.11.00.10 Electric mowers, including battery operated
No. Riding mowers, other than electric:
8433.11.00.20 Under 5.2 kW
No. 8433.11.00.30 5.2 kW and over but under 7.46 kW
No. 8433.11.00.40 7.46 kW and over
No. Other:
8433.11.00.50 Under 3.7 kW
No. 8433.11.00.60 3.7 kW and over
No. 8433.19.00 Other
Free
8433.19.00.10 Greens mowers
No. 8433.19.00.20 Gang cutting units
No. 8433.19.00.30 Other riding mowers
No. Other:
8433.19.00.40 Gasoline powered
No. 8433.19.00.50 Other
No. 8433.20.00 Other mowers, including cutter bars for tractor mounting
Free
Tractor drawn or for tractor mounting:
8433.20.00.20 Rotary cutter type
No. 8433.20.00.40 Other
No. 8433.20.00.60 Other
No. 8433.30.00.00 Other haymaking machinery
No. Free
8433.40.00.00 Straw or fodder balers, including pick-up balers
No. Free
Other harvesting machinery; threshing machinery
8433.51.00 Combine harvester-threshers
Free
8433.51.00.10 Self-propelled
No. 8433.51.00.90 Other
No. 8433.52.00.00 Other threshing machinery
No. Free
8433.53.00.00 Root or tuber harvesting machines
No. Free
8433.59.00 Other
Free
8433.59.00.10 Field forage harvesters
No. 8433.59.00.90 Other
No. 8433.60.00 Machines for cleaning, sorting or grading eggs, fruit or other agricultural produce
Free
8433.60.00.10 Machines for cleaning, sorting or grading eggs
No. 8433.60.00.90 Other
No. 8433.90 Parts:
8433.90.10 Of mowers for lawns, parks or sports grounds
Free
8433.90.10.10 Wheel and tire assemblies
No. 8433.90.10.90 Other
No. 8433.90.50 Other
Free
Of other mowers, harvesting machines and threshing machines:
8433.90.50.10 Road wheels
No. 8433.90.50.25 Of haying machines and balers
No. 8433.90.50.45 Other
No. 8433.90.50.60 Of machines for cleaning, sorting or grading eggs
No. 8433.90.50.80 Of machines for cleaning, sorting or grading fruit or other agricultural produce
No. 8434 Milking machines and dairy machinery, and parts thereof:
8434.10.00.00 Milking machines
No. Free
8434.20.00.00 Dairy machinery
No. Free
8434.90.00.00 Parts
No. Free
8435 Presses, crushers and similar machinery, used in the manufacture of wine, cider, fruit juices or similar beverages; parts thereof:
8435.10.00.00 Machinery
No. Free
8435.90.00.00 Parts
No. Free
8436 Other agricultural, horticultural, forestry, poultry-keeping or bee-keeping machinery, including germination plant fitted with mechanical or thermal equipment; poultry incubators and brooders; parts thereof:
8436.10.00.00 Machinery for preparing animal feeds
No. Free
Poultry-keeping machinery; poultry incubators and brooders:
8436.21.00.00 Poultry incubators and brooders
No. Free
8436.29.00.00 Other
No. Free
8436.80.00 Other machinery
Free
8436.80.00.20 Forestry machinery
No. Other:
8436.80.00.40 Barn and barnyard machines
No. 8436.80.00.60 Machines for preparing crops for market or for use
No. Other:
8436.80.00.70 Bee-keeping machinery
No. 8436.80.00.90 Other
No. Parts:
8436.91.00 Of poultry-keeping machinery or poultry incubators and brooders
Free
8436.91.00.40 Of poultry incubators and brooders
No. 8436.91.00.80 Other
No. 8436.99.00 Other
Free
8436.99.00.20 Of forestry machinery
No. 8436.99.00.30 Of bee-keeping machinery
No. 8436.99.00.35 Of machinery for preparing animal feeds
No. Other:
8436.99.00.40 Of barn or barnyard machines
No. 8436.99.00.70 Of machines for preparing crops for market or for use
No. 8436.99.00.90 Other
No. 8437 Machines for cleaning, sorting or grading seed, grain or dried leguminous vegetables, and parts thereof; machinery used in the milling industry or for the working of cereals or dried leguminous vegetables, other than farm type machinery; parts thereof:
8437.10.00.00 Machines for cleaning, sorting or grading seed, grain or dried leguminous vegetables
No. Free
8437.80.00 Other machinery
Free
8437.80.00.10 Flour mill and grain mill machines
No. 8437.80.00.90 Other
No. 8437.90.00 Parts
Free
8437.90.00.10 Of flour mill or grain mill machines
No. 8437.90.00.90 Other
No. 8438 Machinery, not specified or included elsewhere in this chapter, for the industrial preparation or manufacture of food or drink, other than machinery for the extraction or preparation of animal or fixed vegetable or microbial fats or oils; parts thereof:
8438.10.00 Bakery machinery and machinery for the manufacture of macaroni, spaghetti or similar products
Free
8438.10.00.10 Bakery machinery
No. 8438.10.00.90 Other
No. 8438.20.00.00 Machinery for the manufacture of confectionery, cocoa or chocolate
No. Free
8438.30.00.00 Machinery for sugar manufacture
No. Free
8438.40.00.00 Brewery machinery
No. 2.3%
8438.50.00 Machinery for the preparation of meat or poultry
2.8%
8438.50.00.10 Meat- and poultry-packing plant machinery
No. 8438.50.00.90 Other
No. 8438.60.00.00 Machinery for the preparation of fruits, nuts or vegetables
No. Free
8438.80.00.00 Other machinery
No. Free
8438.90 Parts:
8438.90.10.00 Of machinery for sugar manufacture
No. Free
8438.90.90 Other
2.8%
8438.90.90.15 Of bakery machinery and machinery for the manufacture of macaroni, spaghetti or similar products
No. 8438.90.90.30 Of machinery for the manufacture of confectionery, cocoa or chocolate
No. 8438.90.90.60 Of machinery for the preparation of meat or poultry
No. 8438.90.90.90 Other
No. 8439 Machinery for making pulp of fibrous cellulosic material or for making or finishing paper or paperboard (other than the machinery of heading 8419); parts thereof:
8439.10.00 Machinery for making pulp of fibrous cellulosic material
Free
8439.10.00.10 New
No. 8439.10.00.90 Used or rebuilt
No. 8439.20.00 Machinery for making paper or paperboard
Free
8439.20.00.10 New
No. 8439.20.00.90 Used or rebuilt
No. 8439.30.00.00 Machinery for finishing paper or paperboard
No. Free
Parts:
8439.91 Of machinery for making pulp of fibrous cellulosic materials:
8439.91.10.00 Bed plates, roll bars and other stock-treating parts
No. Free
8439.91.90.00 Other
No. Free
8439.99 Other:
8439.99.10.00 Of machinery for making paper or paperboard
No. Free
8439.99.50.00 Of machinery for finishing paper or paperboard
No. Free
8440 Bookbinding machinery, including book-sewing machines, and parts thereof:
8440.10.00.00 Machinery
No. Free
8440.90.00.00 Parts
No. Free
8441 Other machinery for making up paper pulp, paper or paperboard, including cutting machines of all kinds, and parts thereof:
8441.10.00.00 Cutting machines
No. Free
8441.20.00.00 Machines for making bags, sacks or envelopes
No. Free
8441.30.00.00 Machines for making cartons, boxes, cases, tubes, drums or similar containers, other than by molding
No. Free
8441.40.00.00 Machines for molding articles in paper pulp, paper or paperboard
No. Free
8441.80.00.00 Other machinery
No. Free
8441.90.00.00 Parts
No. Free
8442 Machinery, apparatus and equipment (other than the machines of headings 8456 to 8465), for preparing or making plates, cylinders or other printing components; plates, cylinders and other printing components; plates, cylinders and lithographic stones, prepared for printing purposes (for example, planed, grained or polished); parts thereof:
8442.30.01 Machinery, apparatus and equipment
Free
8442.30.01.10 Phototypesetting and composing machines
No. 8442.30.01.50 Other machinery, apparatus and equipment
No. 8442.40.00.00 Parts of the foregoing machinery, apparatus or equipment
No. Free
8442.50 Plates, cylinders and other printing components; plates, cylinders and lithographic stones, prepared for printing purposes (for example, planed, grained or polished):
8442.50.10.00 Plates
No. Free
8442.50.90.00 Other
No. Free
8443 Printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442; other printers, copying machines and facsimile machines, whether or not combined; parts and accessories thereof:
Printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442:
8443.11 Offset printing machinery, reel-fed:
8443.11.10.00 Double-width newspaper printing presses
No. 3.3%
8443.11.50.00 Other
No. Free
8443.12.00.00 Offset printing machinery, sheet-fed, office type (using sheets with one side not exceeding 22 cm and the other side not exceeding 36 cm in the unfolded state)
No. Free
8443.13.00.00 Other offset printing machinery
No. Free
8443.14.00.00 Letterpress printing machinery, reel fed, excluding flexographic printing
No. 2.2%
8443.15.00.00 Letterpress printing machinery, other than reel fed, excluding flexographic printing
No. Free
8443.16.00.00 Flexographic printing machinery
No. 2.2%
8443.17.00.00 Gravure printing machinery
No. 2.2%
8443.19 Other:
8443.19.20.00 Textile printing machinery
No. 2.6%
8443.19.30.00 Other
No. Free
Other printers, copying machines and facsimile machines, whether or not combined:
8443.31.00.00 Machines which perform two or more of the functions of printing, copying or facsimile transmission, capable of connecting to an automatic data processing machine or to a network
No. Free
8443.32 Other, capable of connecting to an automatic data processing machine or to a network:
8443.32.10 Printer units
Free
Laser:
8443.32.10.10 Capable of producing more than 20 pages per minute
No. 8443.32.10.20 Other
No. 8443.32.10.30 Light bar electronic type
No. 8443.32.10.40 Ink jet
No. 8443.32.10.50 Thermal transfer
No. 8443.32.10.60 Ionographic
No. 8443.32.10.70 Daisy wheel
No. 8443.32.10.80 Dot matrix
No. 8443.32.10.90 Other
No. 8443.32.50.00 Other
No. Free
8443.39 Other:
Copying machines:
Electrostatic photocopying apparatus:
8443.39.10.00 Operating by reproducing the original image directly onto the copy (direct process)
No. Free
8443.39.20.00 Operating by reproducing the original image via an intermediate onto the copy (indirect process)
No. Free
Other photocopying apparatus:
8443.39.30.00 Incorporating an optical system
No. Free
8443.39.40.00 Of the contact type
No. Free
8443.39.50.00 Thermocopying apparatus
No. Free
8443.39.60.00 Other
No. Free
8443.39.90.00 Other
No. Free
Parts and accessories:
8443.91 Parts and accessories of printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442:
8443.91.10.00 Machines for uses ancillary to printing
No. Free
8443.91.20.00 Parts for textile printing machinery
No. Free
8443.91.30.00 Other
No. Free
8443.99 Other:
8443.99.10.00 Accessory and auxiliary machines which are intended for attachment to an electrostatic photocopier and which do not operate independently of such photocopier
No. Free
Parts and accessories of printers:
8443.99.20 Parts of printer units of subheading 8443.32.10 specified in additional U.S. note 2 to this chapter
Free
8443.99.20.10 Ink cartridges
No. 8443.99.20.50 Other
No. 8443.99.25 Other
Free
8443.99.25.10 Ink cartridges
No. 8443.99.25.50 Other
No. Parts and accessories of facsimile machines:
8443.99.30.00 Parts of facsimile machines specified in additional U.S. note 3 to this chapter
No. Free
8443.99.35.00 Other
No. Free
Parts and accessories of copying machines:
8443.99.40.00 Parts of photocopying apparatus of subheading 8443.39.20 specified in additional U.S. note 4 to this chapter
No. Free
8443.99.45.00 Other
No. Free
8443.99.50 Other
Free
For the goods of subheading 8443.31:
8443.99.50.11 Ink cartridges
No. 8443.99.50.15 Other
No. 8443.99.50.50 Other
No. 8444.00.00 Machines for extruding, drawing, texturing or cutting man-made textile materials
Free
8444.00.00.10 Texturing machines
No. 8444.00.00.90 Other
No. 8445 Machines for preparing textile fibers; spinning, doubling or twisting machines and other machinery for producing textile yarns; textile reeling or winding (including weft winding) machines and machines for preparing textile yarns for use on the machines of heading 8446 or 8447:
Machines for preparing textile fibers:
8445.11.00.00 Carding machines
No. Free
8445.12.00.00 Combing machines
No. Free
8445.13.00.00 Drawing or roving machines
No. Free
8445.19.00 Other
3.3%
8445.19.00.40 Cotton gins
No. 8445.19.00.80 Other
No. 8445.20.00.00 Textile spinning machines
No. Free
8445.30.00 Textile doubling or twisting machines
Free
8445.30.00.10 Textile twisting machines
No. 8445.30.00.90 Other
No. 8445.40.00.00 Textile winding (including weft winding) or reeling machines
No. 3.7%
8445.90.00.00 Other
No. 3.7%
8446 Weaving machines (looms):
8446.10.00 For weaving fabrics of a width not exceeding 30 cm
Free
8446.10.00.10 Power looms
No. 8446.10.00.90 Other
No. For weaving fabrics of a width exceeding 30 cm, shuttle type:
8446.21 Power looms:
8446.21.10.00 For weaving fabrics of a width exceeding 4.9 m
No. Free
8446.21.50.00 Other
No. 3.7%
8446.29.00.00 Other
No. Free
8446.30 For weaving fabrics of a width exceeding 30 cm, shuttleless type:
8446.30.10 Power looms for weaving fabrics of a width exceeding 4.9 m
Free
8446.30.10.10 Rapier type
No. 8446.30.10.20 Jet type
No. 8446.30.10.30 Other
No. 8446.30.50 Other
3.7%
8446.30.50.10 Rapier type
No. 8446.30.50.20 Jet type
No. 8446.30.50.30 Other
No. 8447 Knitting machines, stitch-bonding machines and machines for making gimped yarn, tulle, lace, embroidery, trimmings, braid or net and machines for tufting:
Circular knitting machines:
8447.11 With cylinder diameter not exceeding 165 mm:
8447.11.10.00 For knitting hosiery
No. Free
8447.11.90 Other
Free
8447.11.90.10 Open-top cylinder machines
No. 8447.11.90.20 Cylinder and dial machines
No. 8447.11.90.90 Other
No. 8447.12 With cylinder diameter exceeding 165 mm:
8447.12.10.00 For knitting hosiery
No. Free
8447.12.90 Other
Free
8447.12.90.10 Open-top cylinder machines
No. 8447.12.90.20 Cylinder and dial machines
No. 8447.12.90.90 Other
No. 8447.20 Flat knitting machines; stitch-bonding machines:
V-bed flat knitting machines:
8447.20.20.00 Power driven flat knitting machines over 50.8 cm in width
No. Free
8447.20.30.00 Other
No. 2.6%
8447.20.40.00 Warp knitting machines
No. Free
8447.20.60.00 Other
No. Free
8447.90 Other:
8447.90.10.00 Braiding and lace-braiding machines
No. Free
8447.90.50.00 Embroidery machines
No. Free
8447.90.90.00 Other
No. Free
8448 Auxiliary machinery for use with machines of heading 8444, 8445, 8446 or 8447 (for example, dobbies, Jacquards, automatic stop motions and shuttle changing mechanisms); parts and accessories suitable for use solely or principally with the machines of this heading or of heading 8444, 8445, 8446 or 8447 (for example, spindles and spindle flyers, card clothing, combs, extruding nipples, shuttles, healds and heald-frames, hosiery needles):
Auxiliary machinery for machines of heading 8444, 8445, 8446 or 8447:
8448.11.00.00 Dobbies and Jacquards; card reducing, copying, punching or assembling machines for use therewith
No. Free
8448.19.00.00 Other
No. Free
8448.20 Parts and accessories of machines of heading 8444 or of their auxiliary machinery:
8448.20.10.00 Of machines for extruding or drawing man-made textile filaments
No. 3.7%
8448.20.50 Other
3.3%
8448.20.50.10 Of texturing machines
No. 8448.20.50.90 Other
No. Parts and accessories of machines of heading 8445 or of their auxiliary machinery:
8448.31.00.00 Card clothing
m2 3.3%
8448.32.00 Of machines for preparing textile fibers, other than card clothing
Free
8448.32.00.10 Of cotton gins
No. 8448.32.00.90 Other
No. 8448.33.00.00 Spindles, spindle flyers, spinning rings and ring travellers
No. 3.3%
8448.39 Other:
8448.39.10.00 Parts of spinning, doubling or twisting machines
No. Free
8448.39.50.00 Parts of winding or reeling machines
No. 3.7%
8448.39.90.00 Other
No. Free
Parts and accessories of weaving machines (looms) or of their auxiliary machinery:
8448.42.00.00 Reeds for looms, healds and heald-frames
No. 3.7%
8448.49 Other:
8448.49.10.00 Shuttles
No. 3.7%
8448.49.20.00 Other
No. Free
Parts and accessories of machines of heading 8447 or of their auxiliary machinery:
8448.51 Sinkers, needles and other articles used in forming stitches:
Needles for knitting machines:
8448.51.10.00 Latch needles
thousands Free
8448.51.20.00 Spring-beard needles
thousands Free
8448.51.30.00 Other
thousands Free
8448.51.50.00 Other
No. Free
8448.59 Other:
8448.59.10.00 Parts of knitting machines
No. Free
8448.59.50.00 Other
No. Free
8449.00 Machinery for the manufacture or finishing of felt or nonwovens in the piece or in shapes, including machinery for making felt hats; blocks for making hats; parts thereof:
8449.00.10.00 Finishing machinery and parts thereof
No. 2.6%
8449.00.50.00 Other
No. Free
8450 Household- or laundry-type washing machines, including machines which both wash and dry; parts thereof:
Machines, each of a dry linen capacity not exceeding 10 kg:
8450.11.00 Fully automatic machines
1.4%
8450.11.00.10 Coin operated
No. Other:
8450.11.00.40 Top Loading
No. 8450.11.00.80 Other
No. 8450.12.00.00 Other machines with built-in centrifugal dryer
No. 2.6%
8450.19.00.00 Other
No. 1.8%
8450.20.00 Machines, each of a dry linen capacity exceeding 10 kg
1%
8450.20.00.10 Coin operated
No. Other:
8450.20.00.40 Top Loading
No. 8450.20.00.80 Other
No. 8450.90 Parts:
8450.90.20.00 Tubs and tub assemblies
No. 2.6%
8450.90.40.00 Furniture designed to receive the machines of subheadings 8450.11 through 8450.20, inclusive
No. 2.6%
8450.90.60.00 Other
No. 2.6%
8451 Machinery (other than machines of heading 8450) for washing, cleaning, wringing, drying, ironing, pressing (including fusing presses), bleaching, dyeing, dressing, finishing, coating or impregnating textile yarns, fabrics or made up textile articles and machines for applying the paste to the base fabric or other support used in the manufacture of floor coverings such as linoleum; machines for reeling, unreeling, folding, cutting or pinking textile fabrics; parts thereof:
8451.10.00.00 Dry-cleaning machines
No. Free
Drying machines:
8451.21.00 Each of a dry linen capacity not exceeding 10 kg
3.4%
8451.21.00.10 Coin operated
No. 8451.21.00.90 Other
No. 8451.29.00 Other
2.6%
8451.29.00.10 For drying made up articles
No. 8451.29.00.90 Other
No. 8451.30.00.00 Ironing machines and presses (including fusing presses)
No. Free
8451.40.00.00 Washing, bleaching or dyeing machines
No. 3.5%
8451.50.00.00 Machines for reeling, unreeling, folding, cutting or pinking textile fabrics
No. Free
8451.80.00.00 Other machinery
No. 3.5%
8451.90 Parts:
8451.90.30.00 Drying chambers for the drying machines of subheading 8451.21 or 8451.29, and other parts of drying machines incorporating drying chambers
No. 3.5%
8451.90.60.00 Furniture designed to receive the drying machines of subheading 8451.21 or 8451.29
No. 3.5%
8451.90.90 Other
3.5%
8451.90.90.10 Of machines for washing, dry-cleaning, ironing, pressing or drying made up textile articles or of other household or laundry type machines
No. Other:
8451.90.90.20 Of machines for bleaching, dyeing, washing or cleaning
No. 8451.90.90.90 Other
No. 8452 Sewing machines, other than book-sewing machines of heading 8440; furniture, bases and covers specially designed for sewing machines; sewing machine needles; parts thereof:
8452.10.00 Sewing machines of the household type
Free
8452.10.00.10 Valued not over $20 each
No. 8452.10.00.90 Other
No. Other sewing machines:
8452.21 Automatic units:
8452.21.10.00 Specially designed to join footwear soles to uppers
No. Free
8452.21.90.00 Other
No. Free
8452.29 Other:
8452.29.10.00 Specially designed to join footwear soles to uppers
No. Free
8452.29.90.00 Other
No. Free
8452.30.00.00 Sewing machine needles
thousands Free
8452.90 Furniture, bases and covers for sewing machines, and parts thereof; other parts of sewing machines:
8452.90.10.00 Furniture, bases and covers for sewing machines, and parts thereof
No. 2.5%
8452.90.20 Other parts of sewing machines
Free
8452.90.20.10 Of household machines
No. 8452.90.20.90 Other
No. 8453 Machinery for preparing, tanning or working hides, skins or leather or for making or repairing footwear or other articles of hides, skins or leather, other than sewing machines; parts thereof:
8453.10.00.00 Machinery for preparing, tanning or working hides, skins or leather
No. Free
8453.20.00.00 Machinery for making or repairing footwear
No. Free
8453.80.00.00 Other machinery
No. Free
8453.90 Parts:
8453.90.10.00 Of machinery for making or repairing footwear
No. Free
8453.90.50.00 Other
No. Free
8454 Converters, ladles, ingot molds and casting machines, of a kind used in metallurgy or in metal foundries, and parts thereof:
8454.10.00.00 Converters
No. Free
8454.20.00 Ingot molds and ladles
Free
Ingot molds:
8454.20.00.10 For steel ingots
No., kg 8454.20.00.60 Other
No., kg 8454.20.00.80 Ladles
kg 8454.30.00 Casting machines
Free
8454.30.00.10 Die casting machines
No. 8454.30.00.90 Other
No. 8454.90.00 Parts
Free
Of casting machines:
8454.90.00.30 Of die casting machines
No. 8454.90.00.60 Other
No. 8454.90.00.70 Of ingot molds
No. 8454.90.00.80 Other
No. 8455 Metal-rolling mills and rolls therefor; parts thereof:
8455.10.00.00 Tube mills
No. Free
Other rolling mills:
8455.21.00.00 Hot or combination hot and cold
No. Free
8455.22.00.00 Cold
No. Free
8455.30.00 Rolls for rolling mills
Free
Gray iron:
8455.30.00.05 Not exceeding 2,268 kg
No., kg 8455.30.00.15 Exceeding 2,268 kg but not exceeding 6,803.9 kg
No., kg 8455.30.00.25 Exceeding 6,803.9 kg
No., kg Cast steel:
8455.30.00.35 Not exceeding 2,268 kg
No., kg 8455.30.00.45 Exceeding 2,268 kg but not exceeding 6,803.9 kg
No., kg 8455.30.00.55 Exceeding 6,803.9 kg
No., kg Other:
8455.30.00.65 Not exceeding 2,268 kg
No., kg 8455.30.00.75 Exceeding 2,268 kg but not exceeding 6,803.9 kg
No., kg 8455.30.00.85 Exceeding 6,803.9 kg
No., kg 8455.90 Other parts:
8455.90.40.00 Castings or weldments, individually weighing less than 90 tons, for the machines of heading 8455
kg Free
8455.90.80.00 Other
kg Free
8456 Machine tools for working any material by removal of material, by laser or other light or photon beam, ultrasonic, electro-discharge, electro-chemical, electron-beam, ionic-beam or plasma arc processes; water-jet cutting machines:
Operated by laser or other light or photon beam processes
8456.11 Operated by laser:
8456.11.10 For working metal
3.5%
8456.11.10.10 Numerically controlled
No. 8456.11.10.50 Other
No. Other:
8456.11.70.00 Of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517 or parts of automatic data processing units
No. Free
8456.11.90.00 Other
No. 2.4%
8456.12 Operated by other light or photon beam processes:
8456.12.10 For working metal
3.5%
8456.12.10.10 Numerically controlled
No. 8456.12.10.50 Other
No. Other:
8456.12.70.00 Of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517 or parts of automatic data processing
No. Free
8456.12.90.00 Other
No. 2.4%
8456.20 Operated by ultrasonic processes:
8456.20.10 For working metal
3.5%
8456.20.10.10 Numerically controlled
No. 8456.20.10.50 Other
No. 8456.20.50.00 Other
No. 2.4%
8456.30 Operated by electro-discharge processes:
8456.30.10 For working metal
3.5%
8456.30.10.20 Traveling wire (wire-cut) type
No. Other:
8456.30.10.50 Numerically controlled
No. 8456.30.10.70 Other
No. 8456.30.50.00 Other
No. 2.4%
8456.40 Operated by plasma arc process:
8456.40.10 For working metal
3.5%
8456.40.10.10 Numerically controlled
No. 8456.40.10.90 Other
No. 8456.40.90.00 Other
No. 2.2%
8456.50.00.00 Water-jet cutting machines
No. 2.5%
8456.90 Other:
8456.90.31.00 For working metal
No. 3.5%
8456.90.71.00 Other
No. 2.2%
8457 Machining centers, unit construction machines (single station) and multistation transfer machines, for working metal:
8457.10.00 Machining centers
4.2%
8457.10.00.05 Used or rebuilt
No. Other:
With automatic tool changers
Vertical-spindle machines with a Y-axis travel of--
8457.10.00.15 Not over 660 mm
No. 8457.10.00.25 Over 660 mm
No. Horizontal-spindle machines with a Y-axis travel of--
8457.10.00.55 Not over 685 mm
No. 8457.10.00.60 Over 685 mm but not over 1,016 mm
No. 8457.10.00.65 Over 1,016 mm
No. 8457.10.00.70 Other
No. 8457.10.00.75 Other
No. 8457.20.00 Unit construction machines (single station)
3.3%
8457.20.00.10 Numerically controlled
No. 8457.20.00.90 Other
No. 8457.30.00 Multistation transfer machines
3.3%
8457.30.00.10 Numerically controlled
No. 8457.30.00.90 Other
No. 8458 Lathes (including turning centers) for removing metal:
Horizontal lathes:
8458.11.00 Numerically controlled
4.4%
8458.11.00.05 Used or rebuilt
No. Other:
8458.11.00.10 Multiple spindle
No. Other:
8458.11.00.30 With a power rating of less than 18.65 kW
No. 8458.11.00.50 With a power rating of 18.65 kW or greater but not exceeding 37.3 kW
No. 8458.11.00.90 With a power rating exceeding 37.3 kW
No. 8458.19.00 Other
4.4%
8458.19.00.10 Used or rebuilt
No. 8458.19.00.20 Other, valued under $3,025 each
No. Other:
8458.19.00.30 Engine or toolroom lathes
No. Automatic bar and/or chucking machines:
8458.19.00.50 Single spindle
No. 8458.19.00.70 Multiple spindle
No. 8458.19.00.90 Other
No. Other lathes:
8458.91 Numerically controlled:
8458.91.10 Vertical turret lathes
4.2%
8458.91.10.40 Used or rebuilt
No. Other:
8458.91.10.60 Multiple spindle
No. 8458.91.10.80 Other
No. 8458.91.50 Other
4.4%
8458.91.50.40 Used or rebuilt
No. Other:
8458.91.50.50 Multiple spindle
No. 8458.91.50.70 Other
No. 8458.99 Other:
8458.99.10 Vertical turret lathes
4.2%
8458.99.10.10 Used or rebuilt
No. 8458.99.10.50 Other
No. 8458.99.50 Other
4.4%
8458.99.50.30 Used or rebuilt
No. 8458.99.50.60 Other, valued under $3,025 each
No. 8458.99.50.90 Other
No. 8459 Machine tools (including way-type unit head machines) for drilling, boring, milling, threading or tapping by removing metal, other than lathes (including turning centers) of heading 8458:
8459.10.00.00 Way-type unit head machines
No. 3.3%
Other drilling machines:
8459.21.00 Numerically controlled
4.2%
8459.21.00.40 Used or rebuilt
No. 8459.21.00.80 Other
No. 8459.29.00 Other
4.2%
8459.29.00.10 Used or rebuilt
No. 8459.29.00.20 Other, valued under $3,025 each
No. Other:
8459.29.00.40 Multiple spindle
No. Other:
8459.29.00.50 Radial
No. 8459.29.00.70 Upright, excluding sensitive (hand- directed), turret and deep-hole machines
No. 8459.29.00.90 Other
No. Other boring-milling machines:
8459.31.00 Numerically controlled
4.2%
8459.31.00.05 Used or rebuilt
No. Other:
Horizontal spindle
8459.31.00.10 Table type, excluding planer type
No. 8459.31.00.40 Other
No. 8459.31.00.70 Other
No. 8459.39.00 Other
4.2%
8459.39.00.10 Used or rebuilt
No. 8459.39.00.20 Other, valued under $3,025 each
No. Other:
8459.39.00.40 Horizontal spindle
No. 8459.39.00.50 Other
No. Other boring machines:
8459.41.00 Numerically controlled
4.2%
8459.41.00.10 Used or rebuilt
No. 8459.41.00.20 Other, valued under $3,025 each
No. Other:
8459.41.00.30 Vertical
No. 8459.41.00.90 Other
No. 8459.49.00 Other
4.2%
8459.49.00.10 Used or rebuilt
No. 8459.49.00.20 Other, valued under $3,025 each
No. Other:
8459.49.00.30 Vertical
No. 8459.49.00.90 Other
No. Milling machines, knee type:
8459.51.00 Numerically controlled
4.2%
8459.51.00.40 Used or rebuilt
No. 8459.51.00.80 Other
No. 8459.59.00 Other
4.2%
8459.59.00.10 Used or rebuilt
No. 8459.59.00.20 Other, valued under $3,025 each
No. 8459.59.00.30 Other
No. Other milling machines:
8459.61.00 Numerically controlled
4.2%
8459.61.00.40 Used or rebuilt
No. 8459.61.00.80 Other
No. 8459.69.00 Other
4.2%
8459.69.00.10 Used or rebuilt
No. 8459.69.00.20 Other, valued under $3,025 each
No. Other:
8459.69.00.50 Profile, duplicating or die sinking
No. 8459.69.00.70 Bed type
No. 8459.69.00.90 Other
No. 8459.70 Other threading or tapping machines:
8459.70.40.00 Numerically controlled
No. 4.2%
8459.70.80 Other
4.2%
8459.70.80.40 Used or rebuilt
No. 8459.70.80.60 Other, valued under $3,025 each
No. 8459.70.80.80 Other
No. 8460 Machine tools for deburring, sharpening, grinding, honing, lapping, polishing or otherwise finishing metal or cermets by means of grinding stones, abrasives or polishing products, other than gear cutting, gear grinding or gear finishing machines of heading 8461:
Flat-surface grinding machines:
8460.12.00 Numerically controlled
4.4%
8460.12.00.40 Used or rebuilt
No. 8460.12.00.80 Other
No. 8460.19.01 Other
4.4%
8460.19.01.05 Used or rebuilt
No. Other:
8460.19.01.10 Reciprocating-table type
No. 8460.19.01.50 Other
No. Other grinding machines:
8460.22.00 Centerless grinding machines, numerically controlled
4.4%
8460.22.00.40 Used or rebuilt
No. 8460.22.00.80 Other
No. 8460.23.00 Other cylindrical grinding machines, numerically controlled
4.4%
8460.23.00.40 Used or rebuilt
No. 8460.23.00.80 Other
No. 8460.24.00 Other, numerically controlled
4.4%
8460.24.00.05 Used or rebuilt
No. Other:
8460.24.00.10 External cylindrical, including universal
No. 8460.24.00.30 Internal cylindrical
No. 8460.24.00.50 Other
No. 8460.29.01 Other
4.4%
8460.29.01.05 Used or rebuilt
No. Other:
8460.29.01.10 External cylindrical, including universal
No. 8460.29.01.30 Internal cylindrical
No. 8460.29.01.50 Other
No. Sharpening (tool or cutter grinding) machines:
8460.31.00 Numerically controlled
4.4%
8460.31.00.40 Used or rebuilt
No. 8460.31.00.80 Other
No. 8460.39.00 Other
4.4%
8460.39.00.10 Used or rebuilt
No. 8460.39.00.20 Other, valued under $3,025 each
No. 8460.39.00.50 Other
No. 8460.40 Honing or lapping machines:
8460.40.40 Numerically controlled
4.4%
8460.40.40.10 Used or rebuilt
No. 8460.40.40.60 Other
No. 8460.40.80 Other
4.4%
8460.40.80.10 Used or rebuilt
No. 8460.40.80.20 Other, valued under $3,025 each
No. 8460.40.80.80 Other
No. 8460.90 Other:
8460.90.40 Numerically controlled
4.4%
8460.90.40.10 Used or rebuilt
No. 8460.90.40.60 Other
No. 8460.90.80 Other
4.4%
8460.90.80.10 Used or rebuilt
No. 8460.90.80.20 Other, valued under $3,025 each
No. 8460.90.80.80 Other
No. 8461 Machine tools for planing, shaping, slotting, broaching, gear cutting, gear grinding or gear finishing, sawing, cutting-off and other machine tools working by removing metal or cermets, not elsewhere specified or included:
8461.20 Shaping or slotting machines:
8461.20.40.00 Numerically controlled
No. 4.4%
8461.20.80 Other
4.4%
8461.20.80.30 Used or rebuilt
No. 8461.20.80.70 Other, valued under $3,025 each
No. 8461.20.80.90 Other
No. 8461.30 Broaching machines:
8461.30.40 Numerically controlled
4.4%
8461.30.40.20 Used or rebuilt
No. 8461.30.40.60 Other
No. 8461.30.80 Other
4.4%
8461.30.80.20 Used or rebuilt
No. 8461.30.80.40 Other, valued under $3,025 each
No. 8461.30.80.80 Other
No. 8461.40 Gear cutting, gear grinding or gear finishing machines:
8461.40.10 Gear cutting machines
5.8%
8461.40.10.10 Used or rebuilt
No. Other:
8461.40.10.20 For bevel gears
No. Other:
8461.40.10.30 Gear hobbers
No. 8461.40.10.40 Gear shapers
No. 8461.40.10.60 Other
No. 8461.40.50 Gear grinding or finishing machines
4.4%
8461.40.50.20 Used or rebuilt
No. 8461.40.50.40 Other, valued under $3,025 each
No. Other:
8461.40.50.50 For bevel gears
No. 8461.40.50.70 Other
No. 8461.50 Sawing or cutting-off machines:
8461.50.40 Numerically controlled
4.4%
8461.50.40.10 Used or rebuilt
No. 8461.50.40.50 Other
No. 8461.50.80 Other
4.4%
8461.50.80.10 Used or rebuilt
No. 8461.50.80.20 Other, valued under $3,025 each
No. 8461.50.80.90 Other
No. 8461.90 Other:
8461.90.30 Numerically controlled
4.4%
Planing machines:
8461.90.30.20 Used or rebuilt
No. 8461.90.30.40 Other
No. Other:
8461.90.30.60 Used or rebuilt
No. 8461.90.30.80 Other
No. 8461.90.60 Other
4.4%
Planing machines:
8461.90.60.10 Used or rebuilt
No. 8461.90.60.20 Other, valued under $3,025 each
No. 8461.90.60.30 Other
No. Other:
8461.90.60.40 Used or rebuilt
No. 8461.90.60.50 Other, valued under $3,025 each
No. 8461.90.60.90 Other
No. 8462 Machine tools (including presses) for working metal by forging, hammering or die forging (excluding rolling mills); machine tools (including presses, slitting lines and cut-to-length lines) for working metal by bending, folding, straightening, flattening, shearing, punching, notching or nibbling (excluding drawbenches); presses for working metal or metal carbides, not specified above:
Hot forming machines for forging, die forging (including presses) and hot hammers:
8462.11.00 Closed die forging machines
4.4%
8462.11.00.10 Used or rebuilt
No. Other:
8462.11.00.30 Headers and upsetters, including cold headers
No. 8462.11.00.35 Mechanical transfer presses
No. 8462.11.00.55 Other
No. 8462.19.00 Other
4.4%
8462.19.00.10 Used or rebuilt
No. Other:
8462.19.00.30 Headers and upsetters, including cold headers
No. 8462.19.00.35 Mechanical transfer presses
No. 8462.19.00.55 Other
No. Bending, folding, straightening or flattening machines (including press brakes) for flat products:
8462.22.00 Profile forming machines
4.4%
8462.22.00.10 Used or rebuilt
No. 8462.22.00.20 Other, valued under $3,025 each
No. 8462.22.00.50 Other
No. 8462.23.00 Numerically controlled press brakes
4.4%
8462.23.00.10 Used or rebuilt
No. 8462.23.00.20 Other, valued under $3,025 each
No. 8462.23.00.50 Other
No. 8462.24.00 Numerically controlled panel benders
4.4%
8462.24.00.10 Used or rebuilt
No. 8462.24.00.20 Other, valued under $3,025 each
No. 8462.24.00.50 Other
No. 8462.25.00 Numerically controlled roll forming machines
4.4%
8462.25.00.10 Used or rebuilt
No. 8462.25.00.20 Other, valued under $3,025 each
No. 8462.25.00.50 Other
No. 8462.26.00 Other numerically controlled bending, folding, straightening or flattening machines
4.4%
8462.26.00.10 Used or rebuilt
No. 8462.26.00.20 Other, valued under $3,025 each
No. 8462.26.00.50 Other
No. 8462.29.00 Other
4.4%
8462.29.00.10 Used or rebuilt
No. 8462.29.00.20 Other, valued under $3,025 each
No. Other:
8462.29.00.30 Press brakes
No. 8462.29.00.40 Bending rolls
No. 8462.29.00.50 Other
No. Slitting lines, cut-to-length lines and other shearing machines (excluding presses) for flat products, other than combined punching and shearing machines:
8462.32 Slitting lines and cut-to-length lines:
8462.32.10 Numerically controlled
4.4%
8462.32.10.40 Used or rebuilt
No. 8462.32.10.80 Other
No. 8462.32.50 Other
4.4%
8462.32.50.10 Used or rebuilt
No. 8462.32.50.20 Other, valued under $3,025 each
No. 8462.32.50.50 Other
No. 8462.33.00 Numerically controlled shearing machines
4.4%
8462.33.00.40 Used or rebuilt
No. 8462.33.00.80 Other
No. 8462.39.00 Other
4.4%
8462.39.00.10 Used or rebuilt
No. 8462.39.00.20 Other, valued under $3,025 each
No. 8462.39.00.50 Other
No. Punching, notching or nibbling machines (excluding presses) for flat products including combined punching and shearing machines:
8462.42.00 Numerically controlled
4.4%
8462.42.00.40 Used or rebuilt
No. 8462.42.00.80 Other
No. 8462.49.00 Other
4.4%
8462.49.00.10 Used or rebuilt
No. 8462.49.00.20 Other, valued under $3,025 each
No. 8462.49.00.50 Other
No. Machines for working tube, pipe, hollow section and bar (excluding presses):
8462.51.00 Numerically controlled
4.4%
8462.51.00.40 Used or rebuilt
No. 8462.51.00.80 Other
No. 8462.59.00 Other
4.4%
8462.59.00.10 Used or rebuilt
No. 8462.59.00.20 Other, valued under $3,025 each
No. 8462.59.00.50 Other
No. Cold metal working presses:
8462.61 Hydraulic presses:
8462.61.40 Numerically controlled
4.4%
8462.61.40.30 Used or rebuilt
No. 8462.61.40.60 Other
No. 8462.61.80 Other
4.4%
8462.61.80.30 Used or rebuilt
No. 8462.61.80.90 Other
No. 8462.62 Mechanical presses:
8462.62.40 Numerically controlled
4.4%
8462.62.40.10 Used or rebuilt
No. 8462.62.40.30 Other
No. 8462.62.50 Other
4.4%
8462.62.50.30 Used or rebuilt
No. 8462.62.50.90 Other
No. 8462.63 Servo-presses:
8462.63.40 Numerically controlled
4.4%
8462.63.40.10 Used or rebuilt
No. 8462.63.40.30 Other
No. 8462.63.80 Other
4.4%
8462.63.80.10 Used or rebuilt
No. 8462.63.80.20 Other, valued under $3,025 each
No. 8462.63.80.60 Other
No. 8462.69 Other:
8462.69.40 Numerically controlled
4.4%
8462.69.40.10 Used or rebuilt
No. 8462.69.40.30 Other
No. 8462.69.80 Other
4.4%
8462.69.80.10 Used or rebuilt
No. 8462.69.80.20 Other, valued under $3,025 each
No. 8462.69.80.60 Other
No. 8462.90 Other:
8462.90.40 Numerically controlled
4.4%
8462.90.40.10 Used or rebuilt
No. 8462.90.40.30 Other
No. 8462.90.80 Other
4.4%
8462.90.80.10 Used or rebuilt
No. 8462.90.80.20 Other, valued under $3,025 each
No. 8462.90.80.60 Other
No. 8463 Other machine tools for working metal or cermets, without removing material:
8463.10.00 Drawbenches for bars, tubes, profiles, wire or the like
4.4%
8463.10.00.40 Used or rebuilt
No. 8463.10.00.60 Other, valued under $3,025 each
No. 8463.10.00.80 Other
No. 8463.20.00 Thread rolling machines
4.4%
8463.20.00.40 Used or rebuilt
No. 8463.20.00.60 Other, valued under $3,025 each
No. 8463.20.00.80 Other
No. 8463.30.00 Machines for working wire
4.4%
8463.30.00.40 Used or rebuilt
No. 8463.30.00.60 Other, valued under $3,025 each
No. 8463.30.00.80 Other
No. 8463.90.00 Other
4.4%
8463.90.00.40 Used or rebuilt
No. 8463.90.00.60 Other, valued under $3,025 each
No. 8463.90.00.80 Other
No. 8464 Machine tools for working stone, ceramics, concrete, asbestos-cement or like mineral materials or for cold working glass:
8464.10.01.00 Sawing machines
No. Free
8464.20.01 Grinding or polishing machines
2%
8464.20.01.10 Glass-working machines
No. 8464.20.01.20 Other
No. 8464.90.01 Other
2%
8464.90.01.10 Glass-working machines
No. 8464.90.01.20 Other
No. 8465 Machine tools (including machines for nailing, stapling, glueing or otherwise assembling) for working wood, cork, bone, hard rubber, hard plastics or similar hard materials:
8465.10.00 Machines which can carry out different types of machining operations without tool change between such operations
2.4%
Woodworking machines:
Used or rebuilt:
8465.10.00.05 Tenoners
No. 8465.10.00.15 Other
No. Other:
Tenoners:
8465.10.00.25 Numerically controlled
No. 8465.10.00.35 Other
No. 8465.10.00.45 Other
No. 8465.10.00.50 Other
No. 8465.20 Machining centers:
8465.20.10.00 For sawing, planing, milling, molding, grinding, sanding, polishing, drilling or mortising
No. 3%
8465.20.50.00 For bending or assembling
No. 2.9%
8465.20.80.00 Other
No. 2.4%
Other:
8465.91.00 Sawing machines
3%
Woodworking machines:
Used or rebuilt:
8465.91.00.02 Rip saws
No. 8465.91.00.06 Panel saws
No. 8465.91.00.12 Band saws
No. 8465.91.00.16 Cross-cut and optimizing saws
No. 8465.91.00.22 Other
No. Other:
8465.91.00.27 Sawmill machines
No. Other:
8465.91.00.32 Radial arm saws
No. 8465.91.00.36 Tilting arbor table saws
No. 8465.91.00.41 Rip saws
No. 8465.91.00.47 Miter saws
No. 8465.91.00.49 Scroll saws
No. Panel saws:
8465.91.00.53 Valued under $3,000 each
No. 8465.91.00.58 Other
No. Band saws:
8465.91.00.64 Valued under $1,000 each
No. 8465.91.00.68 Other
No. 8465.91.00.74 Cross-cut and optimizing saws
No. 8465.91.00.78 Other
No. 8465.91.00.91 Other
No. 8465.92.00 Planing, milling or molding (by cutting) machines
3%
For woodworking:
Used or rebuilt
8465.92.00.03 Moulders
No. 8465.92.00.06 Routers
No. 8465.92.00.16 Other
No. Other:
Dovetailing machines:
8465.92.00.26 Valued under $3,000 each
No. 8465.92.00.29 Other
No. 8465.92.00.31 Moulders
No. Planers:
8465.92.00.34 Valued under $1,000 each
No. 8465.92.00.37 Other
No. Jointers:
8465.92.00.42 Valued under $1,000 each
No. 8465.92.00.46 Other
No. Routers:
8465.92.00.51 Valued under $3,000 each
No. Other:
8465.92.00.55 Numerically controlled
No. 8465.92.00.58 Other
No. Shapers and profilers:
8465.92.00.62 Valued under $1,000 each
No. 8465.92.00.66 Other
No. 8465.92.00.72 Other
No. 8465.92.00.91 Other
No. 8465.93.00 Grinding, sanding or polishing machines
3%
For woodworking:
Used or rebuilt:
8465.93.00.04 Belt sanders, for a belt width 60 cm or wider
No. 8465.93.00.12 Other
No. Other:
Edge belt sanders:
8465.93.00.30 Valued under $1,000 each
No. 8465.93.00.45 Valued $1,000 or over but under $3,000 each
No. 8465.93.00.55 Other
No. 8465.93.00.65 Belt sanders, for a belt width 60 cm or wider
No. 8465.93.00.75 Other
No. 8465.93.00.91 Other
No. 8465.94.00 Bending or assembling machines
2.9%
For woodworking:
8465.94.00.05 Used or rebuilt
No. Other:
8465.94.00.15 Doweling machines
No. 8465.94.00.25 Edgebanding machines
No. 8465.94.00.35 Laminating machines
No. Presses:
8465.94.00.45 Cold
No. 8465.94.00.55 Other
No. 8465.94.00.65 Other
No. 8465.94.00.91 Other
No. 8465.95.00 Drilling or mortising machines
3%
For woodworking:
Used or rebuilt:
8465.95.00.05 Numerically controlled boring machines
No. 8465.95.00.10 Other
No. Other:
Boring machines:
8465.95.00.20 Numerically controlled
No. Other:
8465.95.00.35 Valued under $3,000 each
No. 8465.95.00.45 Other
No. Other drilling machines:
8465.95.00.55 Valued under $1,000 each
No. 8465.95.00.60 Other
No. 8465.95.00.65 Other
No. 8465.95.00.91 Other
No. 8465.96.00 Splitting, slicing or paring machines
2.4%
For woodworking:
8465.96.00.15 Log splitters
No. 8465.96.00.25 Chippers
No. 8465.96.00.30 Hogs
No. 8465.96.00.40 Other
No. 8465.96.00.51 Other
No. 8465.99.02 Other
2.4%
Woodworking machines:
8465.99.02.10 Debarkers
No. 8465.99.02.20 Lathes
No. 8465.99.02.30 Other
No. 8465.99.02.50 Other
No. 8466 Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand:
8466.10.01 Tool holders and self-opening dieheads
3.9%
8466.10.01.10 Tool holders for forming-type or cutting-type dies
No. 8466.10.01.30 Holders for replaceable cutting or drill inserts
No. 8466.10.01.75 Other
No. 8466.20 Work holders:
8466.20.10 For machine tools used in cutting gears
4.6%
8466.20.10.10 Jigs and fixtures
No. 8466.20.10.90 Other
No. 8466.20.80 Other
3.7%
For metalworking machine tools:
8466.20.80.20 Jigs and fixtures
No. 8466.20.80.35 Other
No. Other work holders:
8466.20.80.40 Jigs and fixtures
No. 8466.20.80.65 Other
No. 8466.30 Dividing heads and other special attachments for machines:
8466.30.10.00 Dividing heads
No. 3.7%
Other special attachments
8466.30.60 Machines
2.9%
8466.30.60.40 For woodworking machines
No. 8466.30.60.85 Other
No. 8466.30.80.00 Other
No. 8%
Other:
8466.91 For machines of heading 8464:
8466.91.10.00 Cast-iron parts not advanced beyond cleaning, and machined only for the removal of fins, gates, sprues and risers or to permit location in finishing machinery
kg Free
8466.91.50.00 Other
No. Free
8466.92 For machines of heading 8465:
8466.92.10.00 Cast-iron parts not advanced beyond cleaning, and machined only for the removal of fins, gates, sprues and risers or to permit location in finishing machinery
kg Free
8466.92.50 Other
4.7%
8466.92.50.10 Of woodworking machines
No. 8466.92.50.90 Other
No. 8466.93 For machines of headings 8456 to 8461:
8466.93.11.00 For water-jet cutting machines
No. Free
Other:
Bed, base, table, head, tail, saddle, cradle, cross slide, column, arm, saw arm, wheelhead, tailstock, headstock, ram, frame, work-arbor support, and C-frame castings, weldments or fabrications:
8466.93.15 Cast-iron parts not advanced beyond cleaning, and machined only for the removal of fins, gates, sprues and risers or to permit location in finishing machinery
Free
8466.93.15.30 For metalworking machine tools for cutting, grinding or finishing gears
kg 8466.93.15.60 Other
kg Other:
8466.93.30.00 Of metalworking machine tools for cutting gears
No. 5.8%
8466.93.53 Other
4.7%
8466.93.53.40 Of metalworking machine tools for grinding or finishing gears
No. 8466.93.53.85 Other
No. Other:
8466.93.60 Cast-iron parts not advanced beyond cleaning, and machined only for the removal of fins, gates, sprues and risers or to permit location in finishing machinery
Free
8466.93.60.30 For metalworking machine tools for cutting, grinding or finishing gears
kg 8466.93.60.60 Other
kg Other:
8466.93.75.00 Of metalworking machine tools for cutting gears
No. 5.8%
Other:
8466.93.96.00 Parts and accessories of machine tools of subheadings 8456.11, 8456.12, 8456.30, 8457.10, 8458.91, 8459.21, 8459.61 and 8461.50, of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517 or parts of automatic data processing machines
No. Free
8466.93.98 Other
4.7%
8466.93.98.40 Of metalworking machine tools for grinding or finishing gears
No. 8466.93.98.85 Other
No. 8466.94 For machines of heading 8462 or 8463:
Cast-iron parts not advanced beyond cleaning, and machined only for the removal of fins, gates, sprues and risers or to permit location in finishing machinery:
8466.94.20.00 Bed, base, table, column, cradle, frame, bolster, crown, slide, rod, tailstock and headstock castings, weldments or fabrications
kg Free
8466.94.40.00 Other
kg Free
Other
8466.94.65 Bed, base, table, column, cradle, frame, bolster, crown, slide, rod, tailstock and headstock castings, weldments or fabrications
4.7%
8466.94.65.40 Parts of mechanical transfer presses
No. 8466.94.65.85 Other
No. 8466.94.85 Other
4.7%
8466.94.85.40 Parts of mechanical transfer presses
No. 8466.94.85.85 Other
No. 8467 Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or nonelectric motor, and parts thereof:
Pneumatic:
8467.11 Rotary type (including combined rotary-percussion):
8467.11.10 Suitable for metal working
4.5%
8467.11.10.40 Grinders, polishers and sanders
No. 8467.11.10.80 Other
No. 8467.11.50 Other
Free
8467.11.50.10 Rock drills
No. 8467.11.50.20 Drills, other than rock drills; screwdrivers and nut runners
No. 8467.11.50.40 Wrenches, other than nut runners
No. 8467.11.50.90 Other
No. 8467.19 Other:
8467.19.10.00 Suitable for metal working
No. 4.5%
8467.19.50 Other
Free
8467.19.50.30 Pneumatic, hand-held force feed lubricating equipment
No. 8467.19.50.60 Designed for use in construction or mining
No. 8467.19.50.90 Other
No. With self-contained electric motor:
8467.21.00 Drills of all kinds
1.7%
Rotary:
8467.21.00.10 Battery powered
No. Other:
8467.21.00.30 With a chuck capacity of less than 12.7 mm
No. 8467.21.00.50 Other
No. 8467.21.00.70 Other, including hammer drills
No. 8467.22.00 Saws
Free
8467.22.00.20 Circular
No. 8467.22.00.40 Chain
No. 8467.22.00.70 Reciprocating and jig
No. 8467.22.00.90 Other
No. 8467.29.00 Other
Free
Grinders, polishers and sanders:
8467.29.00.10 Angle grinders, sanders and polishers
No. 8467.29.00.15 Orbital and straight-line sanders
No. Other:
8467.29.00.25 Belt sanders
No. 8467.29.00.35 Other
No. 8467.29.00.40 Screwdrivers, nut-runners and impact wrenches
No. 8467.29.00.55 Routers
No. 8467.29.00.65 Planers
No. 8467.29.00.70 Grass and weed trimmers/edgers
No. 8467.29.00.80 Electropneumatic rotary and percussion hammers
No. 8467.29.00.85 Electric scissors
No. 8467.29.00.90 Other
No. Other tools:
8467.81.00.00 Chain saws
No. Free
8467.89 Other:
8467.89.10.00 Suitable for metal working
No. Free
8467.89.50 Other
Free
8467.89.50.30 Gasoline powered grass and weed trimmers and brushcutters
No. 8467.89.50.60 Other, designed for use in agriculture or horticulture
No. 8467.89.50.90 Other
No. Parts:
8467.91.01.00 Of chain saws
No. Free
8467.92.00 Of pneumatic tools
Free
8467.92.00.50 Of pneumatic, hand-held force feed lubricating equipment
No. 8467.92.00.90 Other
No. 8467.99.01 Other
Free
8467.99.01.30 Of gasoline powered grass and weed trimmers and brushcutters
No. 8467.99.01.90 Other
No. 8468 Machinery and apparatus for soldering, brazing or welding, whether or not capable of cutting, other than those of heading 8515; gas-operated surface tempering machines and appliances; parts thereof:
8468.10.00.00 Hand-held blow torches
No. 2.9%
8468.20 Other gas-operated machinery and apparatus:
8468.20.10.00 Hand-directed or -controlled
No. 3.9%
8468.20.50.00 Other
No. Free
8468.80 Other machinery and apparatus:
8468.80.10.00 Hand-directed or -controlled
No. 2.9%
8468.80.50.00 Other
No. Free
8468.90 Parts:
8468.90.10.00 Of hand-directed or -controlled machinery and apparatus
No. 2.9%
8468.90.50.00 Other
No. Free
8470 Calculating machines and pocket-size data recording, reproducing and displaying machines with calculating functions; accounting machines, postage-franking machines, ticket-issuing machines and similar machines, incorporating a calculating device; cash registers:
8470.10.00 Electronic calculators capable of operation without an external source of electric power and pocket-size data recording, reproducing and displaying machines with calculating functions
Free
8470.10.00.40 Display only
No. 8470.10.00.60 Other
No. Other electronic calculating machines:
8470.21.00.00 Incorporating a printing device
No. Free
8470.29.00.00 Other
No. Free
8470.30.00.00 Other calculating machines
No. Free
8470.50.00 Cash registers
Free
8470.50.00.20 Point-of-sale terminals
No. 8470.50.00.60 Other
No. 8470.90.01 Other
Free
8470.90.01.10 Postage-franking machines
No. 8470.90.01.90 Other
No. 8471 Automatic data processing machines and units thereof; magnetic or optical readers, machines for transcribing data onto data media in coded form and machines for processing such data, not elsewhere specified or included:
8471.30.01.00 Portable automatic data processing machines, weighing not more than 10 kg, consisting of at least a central processing unit, a keyboard and a display
No. Free
Other automatic data processing machines:
8471.41.01 Comprising in the same housing at least a central processing unit and an input and output unit, whether or not combined
Free
8471.41.01.10 With cathode-ray tube (CRT)
No. 8471.41.01.50 Other
No. 8471.49.00.00 Other, entered in the form of systems
No. Free
8471.50.01 Processing units other than those of subheading 8471.41 or 8471.49, whether or not containing in the same housing one or two of the following types of unit: storage units, input units, output units
Free
8471.50.01.10 With cathode-ray tube (CRT)
No. 8471.50.01.50 Other
No. 8471.60 Input or output units, whether or not containing storage units in the same housing:
8471.60.10 Combined input/output units
Free
8471.60.10.10 With cathode-ray tube (CRT)
No. 8471.60.10.50 Other
No. Other:
8471.60.20.00 Keyboards
No. Free
8471.60.70.00 Units suitable for physical incorporation into automatic data processing machines or units thereof
No. Free
8471.60.80.00 Optical scanners and magnetic ink recognition devices
No. Free
8471.60.90 Other
Free
8471.60.90.30 Card key and magnetic media entry devices
No. 8471.60.90.50 Other
No. 8471.70 Storage units:
Magnetic disk drive units:
For a disk of a diameter exceeding 21 cm:
8471.70.10.00 Without read-write unit assembled therein; read-write units entered separately
No. Free
8471.70.20.00 Units for physical incorporation into automatic data processing machines or units thereof
No. Free
8471.70.30.00 Other
No. Free
Other:
8471.70.40 Not assembled in cabinets, and without attached external power supply
Free
8471.70.40.35 Flexible (floppy) magnetic disk drive units
No. 8471.70.40.65 Hard magnetic disk drive units
No. 8471.70.40.95 Other
No. 8471.70.50 Other
Free
8471.70.50.35 Flexible (floppy) magnetic disk drive units
No. 8471.70.50.65 Hard magnetic disk drive units
No. 8471.70.50.95 Other
No. Other storage units:
8471.70.60.00 Not assembled in cabinets for placing on a table, desk, wall, floor or similar place
No. Free
8471.70.90.00 Other
No. Free
8471.80 Other units of automatic data processing machines:
8471.80.10.00 Control or adapter units
No. Free
Other:
8471.80.40.00 Units suitable for physical incorporation into automatic data processing machines
No. Free
8471.80.90.00 Other
No. Free
8471.90.00.00 Other
No. Free
8472 Other office machines (for example, hectograph or stencil duplicating machines, addressing machines, automatic banknote dispensers, coin-sorting machines, coin-counting or wrapping machines, pencil-sharpening machines, perforating or stapling machines):
8472.10.00.00 Duplicating machines
No. Free
8472.30.00.00 Machines for sorting or folding mail or for inserting mail in envelopes or bands, machines for opening, closing or sealing mail and machines for affixing or canceling postage stamps
No. 1.8%
8472.90 Other:
8472.90.05.00 Addressing machines and address plate embossing machines
No. Free
8472.90.10.00 Automatic teller machines
No. Free
8472.90.40.00 Pencil sharpeners
No. Free
8472.90.50.00 Typewriters other than printers of heading 8443; word processing machines
No. Free
8472.90.60.00 Numbering, dating and check-writing machines
No. Free
8472.90.90 Other
Free
8472.90.90.40 Desktop note counters and note scanners
No. 8472.90.90.60 Other currency and coin handling machines
No. 8472.90.90.80 Other
No. 8473 Parts and accessories (other than covers, carrying cases and the like) suitable for use solely or principally with machines of headings 8470 to 8472:
Parts and accessories of the machines of heading 8470:
8473.21.00.00 Of the electronic calculating machines of subheading 8470.10, 8470.21 or 8470.29
kg Free
8473.29.00.00 Other
kg Free
8473.30 Parts and accessories of the machines of heading 8471:
Not incorporating a cathode ray tube:
8473.30.11 Printed circuit assemblies
Free
8473.30.11.40 Memory modules suitable for use solely or principally with machines of heading 8471
No. 8473.30.11.80 Other
No. 8473.30.20.00 Parts and accessories, including face plates and lock latches, of printed circuit assemblies
No. Free
8473.30.51.00 Other
No. Free
8473.30.91.00 Other
No. Free
8473.40 Parts and accessories of the machines of heading 8472:
8473.40.10.00 Printed circuit assemblies for automatic teller machines of subheading 8472.90.10
No. Free
8473.40.21.00 Printed circuit assemblies of word processing machines of 8472.90.50
No. Free
8473.40.41.00 Other parts and accessories of the machines of 8472.90.50
kg 2%
8473.40.86.00 Other
kg Free
8473.50 Parts and accessories equally suitable for use with machines of two or more of the headings 8470 to 8472:
8473.50.30.00 Printed circuit assemblies
No. Free
8473.50.60.00 Parts and accessories, including face plates and lock latches, of printed circuit assemblies
kg Free
8473.50.90.00 Other
kg Free
8474 Machinery for sorting, screening, separating, washing, crushing, grinding, mixing or kneading earth, stone, ores or other mineral substances, in solid (including powder or paste) form; machinery for agglomerating, shaping or molding solid mineral fuels, ceramic paste, unhardened cements, plastering materials or other mineral products in powder or paste form; machines for forming foundry molds of sand; parts thereof:
8474.10.00 Sorting, screening, separating or washing machines
Free
8474.10.00.10 Portable
No. 8474.10.00.90 Stationary
No. 8474.20.00 Crushing or grinding machines
Free
8474.20.00.10 Portable
No. Stationary:
8474.20.00.50 Crushing
No. 8474.20.00.70 Other
No. Mixing or kneading machines:
8474.31.00.00 Concrete or mortar mixers
No. Free
8474.32.00.00 Machines for mixing mineral substances with bitumen
No. Free
8474.39.00.00 Other
No. Free
8474.80.00 Other machinery
Free
For agglomerating, shaping or molding solid mineral fuels, ceramic paste, unhardened cements, plastering materials or other mineral products in powder or paste form:
8474.80.00.10 Designed for use with ceramic paste, unhardened cements and plastering materials
No. 8474.80.00.15 Other
No. 8474.80.00.20 Machines for forming foundry molds of sand
No. 8474.80.00.80 Other
No. 8474.90.00 Parts
Free
8474.90.00.10 Of sorting, screening, separating or washing machines
No. 8474.90.00.20 Of crushing or grinding machines
No. 8474.90.00.50 Of mixing or kneading machines
No. 8474.90.00.90 Other
No. 8475 Machines for assembling electric or electronic lamps, tubes or flashbulbs, in glass envelopes; machines for manufacturing or hot working glass or glassware; parts thereof:
8475.10.00.00 Machines for assembling electric or electronic lamps, tubes or flashbulbs, in glass envelopes
No. Free
Machines for manufacturing or hot working glass or glassware:
8475.21.00.00 Machines for making optical fibers and preforms thereof
No. Free
8475.29.00.00 Other
No. Free
8475.90 Parts:
8475.90.10.00 Of machines for assembling electric or electronic lamps, tubes or flashbulbs, in glass envelopes
No. Free
8475.90.90.00 Other
No. Free
8476 Automatic goods-vending machines (for example, postage stamp, cigarette, food or beverage machines), including money-changing machines; parts thereof:
Automatic beverage-vending machines:
8476.21.00.00 Incorporating heating or refrigerating devices
No. Free
8476.29.00.00 Other
No. Free
Other machines:
8476.81.00.00 Incorporating heating or refrigerating devices
No. Free
8476.89.00.00 Other
No. Free
8476.90.00.00 Parts
No. Free
8477 Machinery for working rubber or plastics or for the manufacture of products from these materials, not specified or included elsewhere in this chapter; parts thereof:
8477.10 Injection-molding machines:
8477.10.30.00 For manufacturing shoes
No. Free
8477.10.40.00 For use in the manufacture of optical media
No. Free
8477.10.90 Other
3.1%
8477.10.90.15 Of a type used for processing rubber or other thermosetting materials
No. Of a type used for processing thermoplastics:
8477.10.90.30 With a clamp force less than 50 tons
No. 8477.10.90.40 With a clamp force equal to or greater than 50 tons and less than 300 tons
No. 8477.10.90.50 With a clamp force equal to or greater than 300 tons and less than 750 tons
No. 8477.10.90.60 With a clamp force equal to or greater than 750 tons
No. 8477.20.00 Extruders
3.1%
Of a type used for processing rubber or other thermosetting materials:
8477.20.00.05 Single screw
No. 8477.20.00.15 Other, including multiple screw
No. Of a type used for processing thermoplastics:
Single screw, with a screw size:
8477.20.00.35 Less than 6.4 cm
No. 8477.20.00.45 6.4 cm or greater
No. Other, including multiple screw:
8477.20.00.55 With a screw size less than 6.4 cm
No. 8477.20.00.65 With a screw size 6.4 cm or greater
No. 8477.30.00.00 Blow-molding machines
No. 3.1%
8477.40.01.00 Vacuum-molding machines and other thermoforming machines
No. 3.1%
Other machinery for molding or otherwise forming:
8477.51.00 For molding or retreading pneumatic tires or for molding or otherwise forming inner tubes
3.1%
8477.51.00.10 For molding or retreading pneumatic tires
No. 8477.51.00.90 Other
No. 8477.59.01.00 Other
No. 3.1%
8477.80.01.00 Other machinery
No. 3.1%
8477.90 Parts:
8477.90.25 Base, bed, platen, clamp cylinder, ram, and injection castings, weldments and fabrications
3.1%
8477.90.25.40 Of machines of subheading 8477.10.30, 8477.10.40 or 8477.10.90
No. 8477.90.25.80 Other
No. 8477.90.45.01 Barrel screws
No. 3.1%
8477.90.65.00 Hydraulic assemblies incorporating more than one of the following: manifold; valves; pump; oil cooler
No. 3.1%
8477.90.86 Other
3.1%
8477.90.86.01 Of injection-molding machines
No. 8477.90.86.20 Of extruders
No. 8477.90.86.30 Of blow-molding machines
No. 8477.90.86.40 Of machines for forming pneumatic tires
No. 8477.90.86.95 Other parts
No. 8478 Machinery for preparing or making up tobacco, not specified or included elsewhere in this chapter; parts thereof:
8478.10.00 Machinery
Free
8478.10.00.10 Industrial cigarette-making machines
No. 8478.10.00.90 Other
No. 8478.90.00 Parts
Free
8478.90.00.10 Parts of industrial cigarette-making machines
No. 8478.90.00.90 Other
No. 8479 Machines and mechanical appliances having individual functions, not specified or included elsewhere in this chapter; parts thereof:
8479.10.00 Machinery for public works, building or the like
Free
Concrete and bituminous pavers, finishers and spreaders:
8479.10.00.40 For concrete
No. 8479.10.00.60 For bituminous material
No. 8479.10.00.80 Other
No. 8479.20.00.00 Machinery for the extraction or preparation of animal or fixed vegetable or microbial fats or oils
No. Free
8479.30.00.00 Presses for the manufacture of particle board or fiber building board of wood or other ligneous materials and other machinery for treating wood or cork
No. Free
8479.40.00.00 Rope or cable-making machines
No. Free
8479.50.00.00 Industrial robots, not elsewhere specified or included
No. 2.5%
8479.60.00.00 Evaporative air coolers
No. 2.8%
Passenger boarding bridges:
8479.71.00.00 Of a kind used in airports
No. Free
8479.79.00.00 Other
No. Free
Other machines and mechanical appliances:
8479.81.00.00 For treating metal, including electric wire coil-winders
No. Free
8479.82.00 Mixing, kneading, crushing, grinding, screening, sifting, homogenizing, emulsifying or stirring machines
Free
8479.82.00.40 Mixing, kneading or stirring machines
No. 8479.82.00.80 Other
No. 8479.83.00.00 Cold isostatic presses
No. 2.5%
8479.89 Other:
Electromechanical appliances with self-contained electric motor:
8479.89.10.00 Air humidifiers or dehumidifiers
No. Free
8479.89.20.00 Floor polishers
No. Free
8479.89.55.00 Trash compactors
No. 2.8%
8479.89.65.00 Other
No. 2.8%
8479.89.70.00 Carpet sweepers
No. Free
8479.89.83.00 Machines for the manufacturing of optical media
No. Free
8479.89.92.00 Automated electronic component placement machines of a kind used solely or principally for the manufacture of printed circuit assemblies
No. Free
8479.89.95 Other
2.5%
8479.89.95.50 Oil and gas field wireline and downhole equipment
No. 8479.89.95.60 Automotive maintenance machines
No. 8479.89.95.65 Hydraulic accumulators
No. 8479.89.95.85 Ultrasonic cleaning devices
No. 8479.89.95.95 Industrial vibrators
No. 8479.89.95.96 Tow behind sweepers
No. 8479.89.95.99 Other
No. 8479.90 Parts:
8479.90.41.00 Of articles of subheading 8479.89.10 or 8479.89.70
No. Free
Of trash compactors:
8479.90.45.00 Frame assemblies incorporating more than one of the following: baseplate; side frames; power screws; front plates
No. Free
8479.90.55.00 Ram assemblies incorporating a ram wrapper and/or ram cover
No. Free
8479.90.65.00 Container assemblies incorporating more than one of the following: container bottom; container wrapper; slide track; container front
No. Free
8479.90.75.00 Cabinets or cases
No. Free
8479.90.85.00 Other
No. Free
8479.90.95 Other
Free
8479.90.95.30 Of industrial robots
No. Other:
8479.90.95.50 Of machinery for public works, building or the like
No. 8479.90.95.60 Of presses for the manufacture of particle board or fiber building board of wood or other ligneous materials and other machinery for treating wood or cork
No. 8479.90.95.65 Of machines or mechanical appliances for treating metal
No. 8479.90.95.96 Other
No. 8480 Molding boxes for metal foundry; mold bases; molding patterns; molds for metal (other than ingot molds), metal carbides, glass, mineral materials, rubber or plastics:
8480.10.00.00 Molding boxes for metal foundry
No. 3.8%
8480.20.00.00 Mold bases
No. 3.4%
8480.30.00.00 Molding patterns
No. 2.8%
Molds for metal or metal carbides:
8480.41.00.00 Injection or compression types
No. 3.1%
8480.49.00 Other types
3.1%
8480.49.00.10 Molds for centrifugal casting of ductile iron pipe
No. 8480.49.00.90 Other
No. 8480.50.00 Molds for glass
Free
8480.50.00.10 Injection or compression types
No. 8480.50.00.90 Other types
No. 8480.60.00 Molds for mineral materials
Free
8480.60.00.10 Injection or compression types
No. 8480.60.00.90 Other types
No. Molds for rubber or plastics:
8480.71 Injection or compression types:
8480.71.10.00 For shoe machinery
No. Free
8480.71.40.00 For the manufacture of semiconductor devices
No. Free
8480.71.80 Other
3.1%
8480.71.80.20 Temporarily imported for testing, calibration, examination, repair or alteration; returned after being exported for testing, calibration, examination, repair or alteration
No. Other:
8480.71.80.45 Injection type
No. 8480.71.80.60 Compression type
No. 8480.79 Other types:
8480.79.10.00 Molds for shoe machinery
No. Free
8480.79.90 Other
3.1%
8480.79.90.10 Blow molds
No. 8480.79.90.20 Bladder operated molds
No. 8480.79.90.90 Other molds
No. 8481 Taps, cocks, valves and similar appliances, for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves; parts thereof:
8481.10.00 Pressure-reducing valves
2%
8481.10.00.20 Hydraulic fluid power type
No., kg Pneumatic fluid power type:
8481.10.00.40 Filter-regulators and filter-regulator-lubricators
No., kg 8481.10.00.60 Other
No., kg 8481.10.00.90 Other
No., kg 8481.20.00 Valves for oleohydraulic or pneumatic transmissions
2%
Hydraulic valves:
Directional control
8481.20.00.10 Manual type
No., kg 8481.20.00.20 Solenoid type
No., kg 8481.20.00.30 Other
No., kg 8481.20.00.40 Flow control type
No., kg 8481.20.00.50 Other
No., kg Other:
Directional control:
8481.20.00.60 Solenoid type
No., kg 8481.20.00.70 Other
No., kg 8481.20.00.80 Other
No., kg 8481.30 Check (nonreturn) valves:
8481.30.10 Of copper
3%
8481.30.10.10 Having a pressure rating under 850 kPa
No., kg 8481.30.10.90 Having a pressure rating of 850 kPa or over
No., kg 8481.30.20 Of iron or steel
5%
8481.30.20.10 Of iron
No., kg 8481.30.20.90 Of steel
No., kg 8481.30.90.00 Other
No., kg 3%
8481.40.00.00 Safety or relief valves
No., kg 2%
8481.80 Other appliances:
Hand operated:
8481.80.10 Of copper
4%
Having a pressure rating under 850 kPa:
8481.80.10.20 Bath and shower faucets
No., kg 8481.80.10.30 Sink and lavatory faucets
No., kg 8481.80.10.40 Supply stops
No., kg 8481.80.10.50 Other
No., kg Having a pressure rating of 850 kPa or over:
8481.80.10.60 Gate type
No., kg 8481.80.10.70 Globe type
No., kg 8481.80.10.75 Plug type
No., kg 8481.80.10.85 Ball type
No., kg 8481.80.10.90 Butterfly type
No., kg 8481.80.10.95 Other
No., kg 8481.80.30 Of iron or steel
5.6%
Of iron:
8481.80.30.10 Gate type
No., kg 8481.80.30.15 Globe type
No., kg 8481.80.30.20 Plug type
No., kg 8481.80.30.25 Ball type
No., kg 8481.80.30.30 Butterfly type
No., kg 8481.80.30.40 Other
No., kg Of steel:
8481.80.30.55 Gate type
No., kg 8481.80.30.60 Globe type
No., kg 8481.80.30.65 Plug type
No., kg 8481.80.30.70 Ball type
No., kg 8481.80.30.75 Butterfly type
No., kg 8481.80.30.90 Other
No., kg 8481.80.50 Of other materials
3%
8481.80.50.40 Pressure spray can valves
No., kg 8481.80.50.60 Bath, shower, sink and lavatory faucets
No., kg 8481.80.50.90 Other
No., kg 8481.80.90 Other
2%
8481.80.90.05 Solenoid valves
No. 8481.80.90.10 Ballcock mechanisms
No. 8481.80.90.15 Regulator valves, self-operating, for controlling variables such as temperature, pressure, flow and liquid level
No. Other:
With electrical or electro-hydraulic actuators:
8481.80.90.20 Control valves designed for proportional operation by a signal from a control device
No. 8481.80.90.25 Other
No. 8481.80.90.30 With hydraulic actuators
No. With pneumatic actuators:
8481.80.90.35 Control valves designed for proportional operation by a signal from a control device
No. 8481.80.90.40 Other
No. 8481.80.90.45 With thermostatic actuators
No. 8481.80.90.50 Other
No. 8481.90 Parts:
Of hand operated and check appliances:
8481.90.10.00 Of copper
kg 3%
8481.90.30.00 Of iron or steel
kg 5%
8481.90.50.00 Of other materials
kg 3%
8481.90.90 Other
Free
Of valves of subheading 8481.20:
8481.90.90.20 Valve bodies
kg 8481.90.90.40 Other
kg Other:
8481.90.90.60 Valve bodies
kg Other:
8481.90.90.81 Steel forgings
kg 8481.90.90.85 Other
kg 8482 Ball or roller bearings, and parts thereof:
8482.10 Ball bearings:
8482.10.10 Ball bearings with integral shafts
2.4%
8482.10.10.40 Bearings having an outside diameter not over 30 mm
No., kg 8482.10.10.80 Other
No., kg 8482.10.50 Other
9%
8482.10.50.04 Unground bearings
No. Other:
8482.10.50.08 Thrust bearings
No., kg 8482.10.50.12 Linear bearings
No., kg Angular contact bearings:
Wheel hub bearings units:
8482.10.50.16 Flanged
No., kg 8482.10.50.24 Other
No., kg 8482.10.50.28 Other
No., kg Radial bearings:
Single row bearings:
8482.10.50.32 Maximum or full capacity type
No., kg Other bearings, having an outside diameter of:
8482.10.50.36 Under 9 mm
No., kg 8482.10.50.44 9 mm and over but not over 30 mm
No., kg 8482.10.50.48 Over 30 mm but not over 52 mm
No., kg 8482.10.50.52 Over 52 mm but not over 100 mm.
No., kg 8482.10.50.56 Over 100 mm
No., kg 8482.10.50.60 Double row ball bearings
No., kg 8482.10.50.64 Other
No., kg 8482.10.50.68 Other
No., kg 8482.20.00 Tapered roller bearings, including cone and tapered roller assemblies
5.8%
Cup and cone assemblies entered as a set:
Wheel hub units:
8482.20.00.20 Flanged
No., kg 8482.20.00.30 Other
No., kg Other:
8482.20.00.40 With cups having an outside diameter not exceeding 102 mm
No., kg 8482.20.00.61 With cups having an outside diameter exceeding 102 mm but not exceeding 203 mm
No., kg 8482.20.00.64 With cups having an outside diameter exceeding 203 mm but not exceeding 305 mm
No., kg 8482.20.00.67 Other
No., kg Cone assemblies entered separately:
8482.20.00.70 For cups having an outside diameter not exceeding 102 mm
No., kg 8482.20.00.81 For cups having an outside diameter exceeding 102 mm but not exceeding 203 mm
No., kg 8482.20.00.90 Other
No., kg 8482.30.00 Spherical roller bearings
5.8%
8482.30.00.40 Single row
No., kg 8482.30.00.80 Other
No., kg 8482.40.00.00 Needle roller bearings, including cage and needle roller assemblies
No., kg 5.8%
8482.50.00.00 Other cylindrical roller bearings, including cage and roller assemblies
No., kg 5.8%
8482.80.00 Other, including combined ball/roller bearings
5.8%
8482.80.00.20 Combined ball and spherical roller bearings
No., kg 8482.80.00.40 Combined ball and needle roller bearings
No., kg 8482.80.00.60 Combined ball and other cylindrical roller bearings
No., kg 8482.80.00.80 Other
No., kg Parts:
8482.91.00 Balls, needles and rollers
4.4%
Balls:
8482.91.00.10 Of alloy steel
kg 8482.91.00.20 Other
kg 8482.91.00.40 Needles
kg 8482.91.00.50 Tapered rollers
kg 8482.91.00.70 Spherical rollers
kg 8482.91.00.80 Other cylindrical rollers
kg 8482.91.00.90 Other
kg 8482.99 Other:
Inner or outer rings or races:
8482.99.05.00 For ball bearings
No., kg 9.9%
8482.99.15 For tapered roller bearings
5.8%
Cups:
8482.99.15.50 Having an outside diameter not exceeding 203 mm
No., kg 8482.99.15.70 Other
No., kg 8482.99.15.80 Other
No., kg 8482.99.25 Other
5.8%
8482.99.25.20 For spherical roller bearings
No., kg 8482.99.25.40 For needle bearings
No., kg 8482.99.25.60 For other cylindrical roller bearings
No., kg 8482.99.25.80 Other
No., kg Other:
8482.99.35.00 Parts of ball bearings (including parts of ball bearings with integral shafts)
kg 9.9%
8482.99.45.00 Parts of tapered roller bearings
kg 5.8%
8482.99.65 Other
5.8%
8482.99.65.10 For spherical roller bearings
kg 8482.99.65.30 For needle bearings
kg 8482.99.65.60 For other cylindrical roller bearings
kg 8482.99.65.95 Other
kg 8483 Transmission shafts (including camshafts and crankshafts) and cranks; bearing housings, housed bearings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints); parts thereof:
8483.10 Transmission shafts (including camshafts and crankshafts) and cranks:
Camshafts and crankshafts:
8483.10.10 Designed for use solely or principally with spark-ignition internal combustion piston engines or rotary engines
2.5%
For vehicles of chapter 87:
8483.10.10.10 For motorcycles
No., kg 8483.10.10.30 Other
No., kg 8483.10.10.50 Other
No., kg 8483.10.30 Other
2.5%
8483.10.30.10 For vehicles of chapter 87
No., kg 8483.10.30.50 Other
No., kg 8483.10.50.00 Other transmission shafts and cranks
kg Free
8483.20 Housed bearings, incorporating ball or roller bearings:
8483.20.40 Flange, take-up, cartridge and hanger units
4.5%
8483.20.40.40 Incorporating ball bearings
No. 8483.20.40.80 Incorporating roller bearings
No. 8483.20.80 Other
4.5%
8483.20.80.40 Incorporating ball bearings
No. 8483.20.80.80 Incorporating roller bearings
No. 8483.30 Bearing housings; plain shaft bearings:
8483.30.40 Flange, take-up, cartridge and hanger units
4.5%
8483.30.40.40 Ball or roller bearing type
kg 8483.30.40.80 Other
kg 8483.30.80 Other
4.5%
Bearing housings:
8483.30.80.20 Ball or roller bearing type
kg 8483.30.80.40 Other
kg Plain shaft bearings:
With housing:
8483.30.80.55 Rod end bearings
No., kg 8483.30.80.65 Other
No., kg Without housing:
8483.30.80.70 Spherical
No., kg 8483.30.80.90 Other
No., kg 8483.40 Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements entered separately; ball or roller screws; gear boxes and other speed changers, including torque converters:
8483.40.10.00 Torque converters
No. Free
Gear boxes and other speed changers:
Fixed ratio speed changers, multiple and variable ratio speed changers each ratio of which is selected by manual manipulation:
8483.40.30 Imported for use with machines for making cellulosic pulp, paper or paperboard
Free
8483.40.30.40 Fixed ratio speed changers
No. 8483.40.30.80 Other
No. 8483.40.50 Other
2.5%
8483.40.50.10 Fixed ratio speed changers
No. 8483.40.50.20 Gear boxes and speed changers for wind turbines, as described in statistical note 6 to this chapter
No. 8483.40.50.80 Other
No. 8483.40.70.00 Other speed changers
No. 25¢ each + 3.9%
8483.40.80.00 Ball or roller screws
No. 3.8%
8483.40.90.00 Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements entered separately
No. 2.5%
8483.50 Flywheels and pulleys, including pulley blocks:
8483.50.40.00 Gray-iron awning or tackle pulleys, not over 6.4 cm in wheel diameter
No. 5.7%
Other:
8483.50.60.00 Flywheels
No. 2.8%
8483.50.90 Other
2.8%
8483.50.90.40 Grooved pulleys
No. 8483.50.90.80 Other
kg 8483.60 Clutches and shaft couplings (including universal joints):
8483.60.40 Clutches and universal joints
2.8%
8483.60.40.40 Clutches
No. 8483.60.40.80 Universal joints
No. 8483.60.80.00 Other
No. 2.8%
8483.90 Toothed wheels, chain sprockets and other transmission elements presented separately; parts:
8483.90.10 Chain sprockets and parts thereof
2.8%
8483.90.10.10 Forged
kg 8483.90.10.50 Other
kg Parts of bearing housings and plain shaft bearings:
8483.90.20.00 Parts of flange, take-up, cartridge and hanger units
kg 4.5%
8483.90.30.00 Other
kg 4.5%
8483.90.50 Parts of gearing, gear boxes and other speed changers
2.5%
8483.90.50.10 Forged gear blanks
No. 8483.90.50.20 Parts of gear boxes and speed changers for wind turbines
kg 8483.90.50.80 Other
kg Other:
8483.90.70.00 Parts of articles of subheading 8483.20
kg 5.5%
8483.90.80 Other
2.8%
8483.90.80.10 Parts of articles of subheading 8483.60.80
kg 8483.90.80.40 Parts of universal joints
kg 8483.90.80.80 Other
kg 8484 Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal; sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packings; mechanical seals:
8484.10.00.00 Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal
No. 2.5%
8484.20.00.00 Mechanical seals
No. 3.9%
8484.90.00.00 Other
No. 2.5%
8485 Machines for additive manufacturing:
8485.10.01.00 By metal deposit
No. 2.5%
8485.20.00.00 By plastics or rubber deposit
No. 3.1%
8485.30.00.00 By plaster, cement, ceramics or glass deposit
No. 2.5%
8485.80.00.00 Other
No. 2.5%
8485.90 Parts:
8485.90.10.00 By plastics or rubber deposit
No. 3.1%
8485.90.90.00 Other
No. Free
8486 Machines and apparatus of a kind used solely or principally for the manufacture of semiconductor boules or wafers, semiconductor devices, electronic integrated circuits or flat panel displays; machines and apparatus specified in note 11(C) to this chapter; parts and accessories:
8486.10.00.00 Machines and apparatus for the manufacture of boules or wafers
No. Free
8486.20.00.00 Machines and apparatus for the manufacture of semiconductor devices or of electronic integrated circuits
No. Free
8486.30.00.00 Machines and apparatus for the manufacture of flat panel displays
No. Free
8486.40.00 Machines and apparatus specified in note 11(C) to this chapter
Free
8486.40.00.10 For the manufacture or repair of masks and reticles
No. 8486.40.00.20 For assembling semiconductor devices or electronic integrated circuits
No. 8486.40.00.30 For lifting, handling, loading or unloading of boules, wafers, semiconductor devices, electronic integrated circuits and flat panel displays
No. 8486.90.00.00 Parts and accessories
No. Free
8487 Machinery parts, not containing electrical connectors, insulators, coils, contacts or other electrical features, and not specified or included elsewhere in this chapter:
8487.10.00 Ships' or boats' propellers and blades therefor
Free
8487.10.00.40 Of copper
No. 8487.10.00.80 Other
No. 8487.90.00 Other
3.9%
8487.90.00.40 Oil seals, other than those of chapter 40
kg 8487.90.00.80 Other
kg Frequently Asked Questions
What does HTS Chapter 84 cover? ▼
HTS Chapter 84 covers Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof. It contains 2,667 individual tariff classifications, of which 824 have specified duty rates. This chapter falls under Section XVI (Machinery; Electrical Equipment; Parts Thereof).
What is the average tariff rate for Chapter 84? ▼
The average general (MFN) duty rate across all tariff lines in Chapter 84 is 1.4%. The highest individual rate in this chapter is 9.9%. Actual duty on a specific product depends on its precise HTS classification.
How do I find the correct HTS code for my product? ▼
Browse the tariff lines listed below organized by heading and subheading. Each item with an HTS number links to its full detail page showing general, special, and Column 2 duty rates. For complex classifications, consult a licensed customs broker or contact US Customs and Border Protection (CBP).
Are there any duty-free items in Chapter 84? ▼
Yes, many chapters contain items with a "Free" general rate, meaning no duty is assessed for imports from most-favored-nation countries. Look for items marked "Free" in the tariff lines table below. Additional preferential rates may also apply under free trade agreements.
Where does PlainTariff get its tariff data? ▼
All tariff data comes from the U.S. International Trade Commission (USITC) Harmonized Tariff Schedule (HTS) 2026 Basic Edition, the official schedule of US import duties.
Learn More About Tariffs
Next steps
Find the exact rate for your product within Chapter 84.
- Click any tariff line above to see its General, Special, and Column 2 rates. Tariff lines above
- Estimate the landed duty cost on a shipment in this chapter. Tariff calculator
- Search the full schedule by product description. Search HTS
The chapter average is an orientation only, duty is set per tariff line, and Special preferential rates may apply to qualifying origins.
Related
Sources: U.S. International Trade Commission Harmonized Tariff Schedule (2026 Basic Edition) and FAO FAOSTAT Trade: Crops and Livestock. See our methodology for how figures are computed.
Every figure on PlainTariff is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.