PlainTariff

HTS Chapter 72 · Section XV

Iron and steel

Chapter 72 averages a 0.3% general (MFN) duty across its 262 rated tariff lines, with the steepest line reaching 10%.

Browse all chapters →
0.3%
avg MFN duty
10%
highest line
262
rated tariff lines
92%
enter duty-free

Tariff lines in Chapter 72 by duty-rate band

How the 262 rated lines in this chapter distribute across general (MFN) rate ranges

Duty-free2400.1–5%195–10%3

Source: USITC HTS 2026 As of 2026

About HTS Chapter 72

HTS Chapter 72 - Iron and steel - organizes 949 tariff classifications in the US Harmonized Tariff Schedule. Of these, 262 carry explicit duty rates at the tariff-line level, meaning importers can look up a specific Column 1 General (MFN) rate for every qualifying shipment. Chapter 72 sits within Section XV (Base Metals and Articles of Base Metal), which groups commercially related product categories together.

The average general duty rate across all tariff lines in this chapter is 0.3%, with the highest individual rate reaching 10%. Duty burden varies widely across tariff lines within this chapter, classification precision matters. Below, each line links to its individual detail page showing General, Special (FTA), and Column 2 rates.

Use this chapter page as the entry point for classifying any product that falls under iron and steel. The tree below preserves the HTS indentation hierarchy (heading → subheading → tariff line), so you can narrow from broad category to specific 8-10 digit code. All data comes from the US International Trade Commission (USITC) HTS 2026 Basic Edition, the official schedule of import duties used by US Customs and Border Protection.

Chapter 72 At a Glance

Tariff distribution statistics for HTS Chapter 72 from USITC 2026 Basic Edition.
Metric Value Notes
Total tariff classifications 949 All headings, subheadings, and tariff lines.
Lines with explicit rates 262 Tariff lines carrying a Column 1 General duty.
Average general rate 0.3% Mean MFN rate across rated lines.
Highest line rate 10% Peak Column 1 General rate within the chapter.

Source: USITC Harmonized Tariff Schedule 2026 Basic Edition. Computed at last data refresh, see methodology.

Tariff Lines

7201 Pig iron and spiegeleisen in pigs, blocks or other primary forms:
7201.10.00.00 Nonalloy pig iron containing by weight 0.5 percent or less of phosphorus
t
Free
7201.20.00.00 Nonalloy pig iron containing by weight more than 0.5 percent of phosphorus
t
Free
7201.50 Alloy pig iron; spiegeleisen:
7201.50.30.00 Alloy pig iron
t
Free
7201.50.60.00 Spiegeleisen
t
Free
7202 Ferroalloys:
Ferromanganese:
7202.11 Containing by weight more than 2 percent of carbon:
7202.11.10.00 Containing by weight more than 2 percent but not more than 4 percent of carbon
kg, Mn kg
1.4%
7202.11.50.00 Containing by weight more than 4 percent of carbon
kg, Mn kg
1.5%
7202.19 Other:
7202.19.10.00 Containing by weight not more than 1 percent of carbon
kg, Mn kg
2.3%
7202.19.50.00 Containing by weight more than 1 percent but not more than 2 percent of carbon
kg, Mn kg
1.4%
Ferrosilicon:
7202.21 Containing by weight more than 55 percent of silicon:
Containing by weight more than 55 percent but not more than 80 percent of silicon:
7202.21.10.00 Containing by weight more than 3 percent of calcium
kg, Si kg
1.1%
7202.21.50.00 Other
kg, Si kg
1.5%
7202.21.75.00 Containing by weight more than 80 percent but not more than 90 percent of silicon
kg, Si kg
1.9%
7202.21.90.00 Containing by weight more than 90 percent of silicon
kg, Si kg
5.8%
7202.29.00 Other
Free
7202.29.00.10 Containing by weight over 2 percent of magnesium
kg, Si kg
7202.29.00.50 Other
kg, Si kg
7202.30.00.00 Ferrosilicon manganese
kg, Mn kg
3.9%
Ferrochromium:
7202.41.00.00 Containing by weight more than 4 percent of carbon
kg, Cr kg
1.9%
7202.49 Other:
7202.49.10.00 Containing by weight more than 3 percent of carbon
kg, Cr kg
1.9%
7202.49.50 Other
3.1%
7202.49.50.10 Containing by weight more than 0.5 percent of carbon
kg, Cr kg
7202.49.50.90 Other
kg, Cr kg
7202.50.00.00 Ferrosilicon chromium
kg, Cr kg
10%
7202.60.00.00 Ferronickel
kg, Ni kg
Free
7202.70.00.00 Ferromolybdenum
kg, Mo kg
4.5%
7202.80.00.00 Ferrotungsten and ferrosilicon tungsten
kg, W kg
5.6%
Other:
7202.91.00.00 Ferrotitanium and ferrosilicon titanium
kg
3.7%
7202.92.00.00 Ferrovanadium
kg, V kg
4.2%
7202.93 Ferroniobium:
7202.93.40.00 Containing by weight less than 0.02 percent of phosphorus or sulfur or less than 0.4 percent of silicon
kg
5%
7202.93.80.00 Other
kg
5%
7202.99 Other:
7202.99.10.00 Ferrozirconium
kg
4.2%
7202.99.20.00 Calcium silicon
kg
5%
7202.99.80 Other
5%
7202.99.80.20 Ferrophosphorus
kg
7202.99.80.40 Other
kg
7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94 percent, in lumps, pellets or similar forms:
7203.10.00.00 Ferrous products obtained by direct reduction of iron ore
t
Free
7203.90.00.00 Other
t
Free
7204 Ferrous waste and scrap; remelting scrap ingots of iron or steel:
7204.10.00.00 Waste and scrap of cast iron
t
Free
Waste and scrap of alloy steel:
7204.21.00.00 Of stainless steel
t
Free
7204.29.00.00 Other
t
Free
7204.30.00.00 Waste and scrap of tinned iron or steel
t
Free
Other waste and scrap:
7204.41.00 Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles
Free
7204.41.00.20 No. 1 bundles
t
7204.41.00.40 No. 2 bundles
t
7204.41.00.60 Borings, shovelings and turnings
t
7204.41.00.80 Other
t
7204.49.00 Other
Free
7204.49.00.20 No. 1 heavy melting
t
7204.49.00.40 No. 2 heavy melting
t
Other:
7204.49.00.60 Cut plate and structural
t
7204.49.00.70 Shredded
t
7204.49.00.80 Other
t
7204.50.00.00 Remelting scrap ingots
t
Free
7205 Granules and powders, of pig iron, spiegeleisen, iron or steel:
7205.10.00.00 Granules
kg
Free
Powders:
7205.21.00.00 Of alloy steel
kg
Free
7205.29.00.00 Other
t
Free
II. IRON AND NONALLOY STEEL
7206 Iron and nonalloy steel in ingots or other primary forms (excluding iron of heading 7203):
7206.10.00.00 Ingots
kg
Free
7206.90.00.00 Other
kg
Free
7207 Semifinished products of iron or nonalloy steel:
Containing by weight less than 0.25 percent of carbon:
7207.11.00.00 Of rectangular (including square) cross section, the width measuring less than twice the thickness
kg
Free
7207.12.00 Other, of rectangular (other than square) cross section
Free
7207.12.00.10 Having a width measuring less than four times the thickness
kg
7207.12.00.50 Having a width measuring at least four times the thickness
kg
7207.19.00 Other
Free
7207.19.00.30 Of circular cross section
kg
7207.19.00.90 Other
kg
7207.20.00 Containing by weight 0.25 percent or more of carbon
Free
Of rectangular (including square) cross section:
7207.20.00.25 Having a width measuring less than four times the thickness
kg
7207.20.00.45 Having a width measuring at least four times the thickness
kg
7207.20.00.75 Of circular cross section
kg
7207.20.00.90 Other
kg
7208 Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated:
7208.10 In coils, not further worked than hot-rolled, with patterns in relief:
7208.10.15.00 Pickled
kg
Free
Other:
7208.10.30.00 Of a thickness of 4.75 mm or more
kg
Free
7208.10.60.00 Of a thickness of less than 4.75 mm
kg
Free
Other, in coils, not further worked than hot-rolled, pickled:
7208.25 Of a thickness of 4.75 mm or more:
7208.25.30.00 Of high-strength steel
kg
Free
7208.25.60.00 Other
kg
Free
7208.26.00 Of a thickness of 3 mm or more but less than 4.75 mm
Free
7208.26.00.30 High-strength steel
kg
7208.26.00.60 Other
kg
7208.27.00 Of a thickness of less than 3 mm
Free
High-strength steel:
7208.27.00.40 “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter
kg
7208.27.00.45 Other
kg
7208.27.00.60 Other
kg
Other, in coils, not further worked than hot-rolled:
7208.36.00 Of a thickness exceeding 10 mm
Free
7208.36.00.30 High-strength steel
kg
7208.36.00.60 Other
kg
7208.37.00 Of a thickness of 4.75 mm or more but not exceeding 10 mm
Free
7208.37.00.30 High-strength steel
kg
7208.37.00.60 Other
kg
7208.38.00 Of a thickness of 3 mm or more but less than 4.75 mm
Free
7208.38.00.15 High-strength steel
kg
Other:
7208.38.00.30 With untrimmed edges
kg
7208.38.00.90 Other
kg
7208.39.00 Of a thickness of less than 3 mm
Free
High-strength steel:
7208.39.00.20 “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter
kg
7208.39.00.25 Other
kg
Other:
7208.39.00.30 With untrimmed edges
kg
7208.39.00.90 Other
kg
7208.40 Not in coils, not further worked than hot-rolled, with patterns in relief:
7208.40.30 Of a thickness of 4.75 mm or more
Free
7208.40.30.30 Of a thickness exceeding 10 mm
kg
7208.40.30.60 Other
kg
7208.40.60 Of a thickness of less than 4.75 mm
Free
7208.40.60.30 Of a thickness less than 3 mm
kg
7208.40.60.60 Other
kg
Other, not in coils, not further worked than hot-rolled:
7208.51.00 Of a thickness exceeding 10 mm
Free
7208.51.00.30 Universal mill plate
kg
Other:
7208.51.00.45 Of high-strength steel
kg
7208.51.00.60 Other
kg
7208.52.00.00 Of a thickness of 4.75 mm or more but not exceeding 10 mm
kg
Free
7208.53.00.00 Of a thickness of 3 mm or more but less than 4.75 mm
kg
Free
7208.54.00.00 Of a thickness of less than 3 mm
kg
Free
7208.90.00.00 Other
kg
Free
7209 Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated:
In coils, not further worked than cold-rolled (cold-reduced):
7209.15.00.00 Of a thickness of 3 mm or more
kg
Free
7209.16.00 Of a thickness exceeding 1 mm but less than 3 mm
Free
Of high-strength steel:
Annealed:
7209.16.00.40 “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter
kg
7209.16.00.45 Other
kg
7209.16.00.60 Other
kg
Other:
7209.16.00.70 Annealed
kg
7209.16.00.91 Other
kg
7209.17.00 Of a thickness of 0.5 mm or more but not exceeding 1 mm
Free
Of high-strength steel:
Annealed:
7209.17.00.40 “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter
kg
7209.17.00.45 Other
kg
7209.17.00.60 Other
kg
Other:
7209.17.00.70 Annealed
kg
7209.17.00.91 Other
kg
7209.18 Of a thickness of less than 0.5 mm:
7209.18.15 Of high-strength steel
Free
7209.18.15.30 Annealed
kg
7209.18.15.60 Other
kg
Other:
7209.18.25 Of a thickness of less than 0.361 mm (blackplate)
Free
7209.18.25.20 Annealed
kg
7209.18.25.85 Other
kg
7209.18.60 Other
Free
7209.18.60.20 Annealed
kg
7209.18.60.90 Other
kg
Not in coils, not further worked than cold-rolled (cold-reduced):
7209.25.00.00 Of a thickness of 3 mm or more
kg
Free
7209.26.00.00 Of a thickness exceeding 1 mm but less than 3 mm
kg
Free
7209.27.00.00 Of a thickness of 0.5 mm or more but not exceeding 1 mm
kg
Free
7209.28.00.00 Of a thickness of less than 0.5 mm
kg
Free
7209.90.00.00 Other
kg
Free
7210 Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, clad, plated or coated:
Plated or coated with tin:
7210.11.00.00 Of a thickness of 0.5 mm or more
kg
Free
7210.12.00.00 Of a thickness of less than 0.5 mm
kg
Free
7210.20.00.00 Plated or coated with lead, including terne-plate
kg
Free
7210.30.00 Electrolytically plated or coated with zinc
Free
7210.30.00.30 Of high-strength steel
kg
7210.30.00.60 Other
kg
Otherwise plated or coated with zinc:
7210.41.00.00 Corrugated
kg
Free
7210.49.00 Other
Free
Of high-strength steel:
7210.49.00.40 “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter
kg
7210.49.00.45 Other
kg
Other:
7210.49.00.91 Of a thickness of 0.4 mm or more
kg
7210.49.00.95 Other
kg
7210.50.00 Plated or coated with chromium oxides or with chromium and chromium oxides
Free
7210.50.00.20 Of a width less than 1050 mm
kg
7210.50.00.90 Other
kg
Plated or coated with aluminum:
7210.61.00.00 Plated or coated with aluminum-zinc alloys
kg
Free
7210.69.00.00 Other
kg
Free
7210.70 Painted, varnished or coated with plastics:
7210.70.30.00 Not coated or plated with metal and not clad
kg
Free
7210.70.60 Other
Free
Zinc coated or plated:
7210.70.60.30 Electrolytically coated or plated
kg
7210.70.60.60 Other
kg
7210.70.60.90 Other
kg
7210.90 Other:
7210.90.10.00 Clad
kg
Free
Other:
7210.90.60.00 Electrolytically coated or plated with base metal
kg
Free
7210.90.90.00 Other
kg
Free
7211 Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, not clad, plated or coated:
Not further worked than hot-rolled:
7211.13.00.00 Universal mill plate
kg
Free
7211.14.00 Other, of a thickness of 4.75 mm or more
Free
7211.14.00.30 Of high-strength steel
kg
Other:
7211.14.00.45 Not in coils
kg
7211.14.00.90 Other
kg
7211.19 Other:
Of a width of less than 300 mm:
7211.19.15.00 Of high-strength steel
kg
Free
Other:
7211.19.20.00 Of a thickness exceeding 1.25 mm
kg
Free
7211.19.30.00 Other
kg
Free
Other:
7211.19.45.00 Of high-strength steel
kg
Free
Other:
7211.19.60.00 Pickled
kg
Free
7211.19.75 Other
Free
In coils:
7211.19.75.30 With untrimmed edges
kg
7211.19.75.60 Other
kg
7211.19.75.90 Other
kg
Not further worked than cold-rolled (cold-reduced):
7211.23 Containing by weight less than 0.25 percent of carbon:
Of a width of less than 300 mm:
Of a thickness exceeding 1.25 mm:
7211.23.15.00 Of high-strength steel
kg
Free
7211.23.20.00 Other
kg
Free
7211.23.30.00 Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
kg
Free
7211.23.45.00 Of a thickness not exceeding 0.25 mm
kg
Free
7211.23.60 Other
Free
7211.23.60.30 Of a thickness exceeding 1.25 mm
kg
7211.23.60.60 Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
kg
7211.23.60.90 Of a thickness not exceeding 0.25 mm:
kg
7211.29 Other:
Of a width of less than 300 mm:
7211.29.20 Of a thickness exceeding 0.25 mm
Free
7211.29.20.30 Of a width less than 51 mm, in coils
kg
7211.29.20.90 Other
kg
7211.29.45.00 Other
kg
Free
7211.29.60 Other
Free
7211.29.60.30 Of a thickness exceeding 1.25 mm
kg
7211.29.60.80 Other
kg
7211.90.00.00 Other
kg
Free
7212 Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, clad, plated or coated:
7212.10.00.00 Plated or coated with tin
kg
Free
7212.20.00.00 Electrolytically plated or coated with zinc
kg
Free
7212.30 Otherwise plated or coated with zinc:
Of a width of less than 300 mm:
7212.30.10 Of a thickness exceeding 0.25 mm or more
Free
7212.30.10.30 Of a width less than 51 mm, in coils
kg
7212.30.10.90 Other
kg
7212.30.30.00 Other
kg
Free
7212.30.50.00 Other
kg
Free
7212.40 Painted, varnished or coated with plastics:
7212.40.10.00 Of a width of less than 300 mm
kg
Free
7212.40.50.00 Other
kg
Free
7212.50.00.00 Otherwise plated or coated
kg
Free
7212.60.00.00 Clad
kg
Free
7213 Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel:
7213.10.00.00 Concrete reinforcing bars and rods
kg
Free
7213.20.00 Other, of free-cutting steel
Free
7213.20.00.10 Containing by weight 0.1 percent or more of lead
kg
7213.20.00.80 Other
kg
Other:
7213.91 Of circular cross section measuring less than 14 mm in diameter:
7213.91.30 Not tempered, not treated and not partly manufactured
Free
7213.91.30.11 Tire cord-quality steel wire rod of a kind described in statistical note 5 to this chapter
kg
7213.91.30.15 Of Cold Heading Quality (CHQ) steel of a kind described in statistical note 6 to this chapter
kg
7213.91.30.20 Of welding quality wire rods of a kind described in statistical note 7 to this chapter
kg
7213.91.30.93 Other
kg
Other:
7213.91.45.00 Containing by weight 0.6 percent or more of carbon
kg
Free
7213.91.60.00 Other
kg
Free
7213.99.00 Other
Free
Of circular cross section:
7213.99.00.30 With a diameter of 14 mm or more but less than 19 mm
kg
7213.99.00.60 With a diameter of 19 mm or more
kg
7213.99.00.90 Other
kg
7214 Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling:
7214.10.00.00 Forged
kg
Free
7214.20.00.00 Concrete reinforcing bars and rods
kg
Free
7214.30.00 Other, of free-cutting steel
Free
7214.30.00.10 Containing by weight 0.1 percent or more of lead
kg
7214.30.00.80 Other
kg
Other:
7214.91.00 Of rectangular (other than square) cross-section
Free
Containing by weight less than 0.25 percent of carbon:
7214.91.00.16 With a maximum cross section less than 152 mm
kg
7214.91.00.20 With a maximum cross section of 152 mm or more
kg
7214.91.00.60 Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
kg
7214.91.00.90 Containing by weight 0.6 percent or more of carbon
kg
7214.99.00 Other
Free
Rounds:
Containing by weight less than 0.25 percent of carbon:
7214.99.00.16 With a diameter less than 76 mm
kg
7214.99.00.21 With a diameter of 76 mm or more but not exceeding 152 mm
kg
7214.99.00.26 With a diameter exceeding 152 mm
kg
Containing by weight 0.25 percent or more but less than 0.6 percent of carbon:
7214.99.00.31 With a diameter less than 76 mm
kg
7214.99.00.36 With a diameter of 76 mm or more but not exceeding 152 mm
kg
7214.99.00.40 With a diameter exceeding 152 mm
kg
7214.99.00.45 Containing by weight 0.6 percent or more of carbon
kg
Other:
7214.99.00.60 Containing by weight less than 0.25 percent of carbon
kg
7214.99.00.75 Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
kg
7214.99.00.90 Containing by weight 0.6 percent or more of carbon
kg
7215 Other bars and rods of iron or nonalloy steel:
7215.10.00 Of free-cutting steel, not further worked than cold-formed or cold-finished
Free
7215.10.00.10 Containing by weight 0.1 percent or more of lead
kg
7215.10.00.80 Other
kg
7215.50.00 Other, not further worked than cold-formed or cold-finished
Free
Containing by weight less than 0.25 percent of carbon:
7215.50.00.16 With a diameter or cross section measuring less than 76 mm
kg
7215.50.00.18 With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm
kg
7215.50.00.20 With a diameter or cross section exceeding 228 mm
kg
Containing by weight 0.25 percent or more but less than 0.6 percent of carbon:
7215.50.00.61 With a diameter or cross section measuring less than 76 mm
kg
7215.50.00.63 With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm
kg
7215.50.00.65 With a diameter or cross section exceeding 228 mm
kg
7215.50.00.90 Containing by weight 0.6 percent or more of carbon
kg
7215.90 Other:
Plated or coated with metal:
7215.90.10.00 Not cold-formed
kg
Free
7215.90.30.00 Cold-formed
kg
Free
7215.90.50.00 Other
kg
Free
7216 Angles, shapes and sections of iron or nonalloy steel:
7216.10.00 U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
Free
7216.10.00.10 U sections
kg
7216.10.00.50 Other
kg
L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm:
7216.21.00.00 L sections
kg
Free
7216.22.00.00 T sections
kg
Free
U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more:
7216.31.00.00 U sections
kg
Free
7216.32.00.00 I sections (standard beams)
kg
Free
7216.33.00 H sections
Free
7216.33.00.30 Weighing not more than 11.3 kg per 30.5 cm, with a web depth measuring 102 mm to 356 mm
kg
7216.33.00.60 Weighing more than 11.3 kg but not more than 27.2 kg per 30.5 cm, with a web depth measuring 203 mm to 457 mm
kg
7216.33.00.90 Other
kg
7216.40.00 L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
Free
7216.40.00.10 L sections
kg
7216.40.00.50 Other
kg
7216.50.00.00 Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded
kg
Free
Angles, shapes and sections, not further worked than cold-formed or cold-finished:
7216.61.00.00 Obtained from flat-rolled products
kg
Free
7216.69.00.00 Other
kg
Free
Other:
7216.91.00 Cold-formed or cold-finished from flat-rolled products
Free
7216.91.00.10 Drilled, notched, punched or cambered
kg
7216.91.00.90 Other
kg
7216.99.00 Other
Free
7216.99.00.10 Drilled, notched, punched or cambered
kg
7216.99.00.90 Other
kg
7217 Wire of iron or nonalloy steel:
7217.10 Not plated or coated, whether or not polished:
Containing by weight less than 0.25 percent of carbon:
Flat wire:
7217.10.10.00 Of a thickness not exceeding 0.25 mm
kg
Free
7217.10.20.00 Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
kg
Free
7217.10.30.00 Of a thickness exceeding 1.25 mm
kg
Free
Round wire:
7217.10.40 With a diameter of less than 1.5 mm
Free
Heat treated:
7217.10.40.40 In coils weighing not more than 2 kilograms
kg
7217.10.40.45 Other
kg
7217.10.40.90 Other
kg
7217.10.50 With a diameter of 1.5 mm or more
Free
7217.10.50.30 Heat treated
kg
7217.10.50.90 Other
kg
7217.10.60.00 Other wire
kg
Free
Other:
7217.10.70.00 Flat wire
kg
Free
7217.10.80 Round wire
Free
Containing by weight 0.25 percent or more but less than 0.6 percent of carbon:
7217.10.80.10 Heat treated
kg
7217.10.80.20 Other
kg
Containing by weight 0.6 percent or more of carbon:
Heat treated:
7217.10.80.25 With a diameter of less than 1.0 mm
kg
7217.10.80.30 With a diameter of 1.0 mm or more but less than 1.5 mm
kg
7217.10.80.45 With a diameter of 1.5 mm or more
kg
Other:
7217.10.80.60 With a diameter of less than 1.0 mm
kg
7217.10.80.75 With a diameter of 1.0 mm or more but less than 1.5 mm
kg
7217.10.80.90 With a diameter of 1.5 mm or more
kg
7217.10.90.00 Other wire
kg
Free
7217.20 Plated or coated with zinc:
7217.20.15.00 Flat wire
kg
Free
Round wire:
7217.20.30.00 With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon
kg
Free
7217.20.45 Other
Free
With a diameter of less than 1.0 mm:
7217.20.45.10 Containing by weight less than 0.25 percent of carbon
kg
7217.20.45.20 Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
kg
7217.20.45.30 Containing by weight 0.6 percent or more of carbon
kg
With a diameter of 1.0 mm or more but less than 1.5 mm:
7217.20.45.40 Containing by weight less than 0.25 percent of carbon
kg
7217.20.45.50 Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
kg
7217.20.45.60 Containing by weight 0.6 percent or more of carbon
kg
With a diameter of 1.5 mm or more:
7217.20.45.70 Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
kg
7217.20.45.80 Containing by weight 0.6 percent or more of carbon
kg
Other:
7217.20.60.00 Containing by weight less than 0.25 percent of carbon
kg
Free
7217.20.75.00 Other
kg
Free
7217.30 Plated or coated with other base metals:
7217.30.15 Flat wire
Free
7217.30.15.30 Containing by weight 0.6 percent or more of carbon
kg
7217.30.15.60 Other
kg
Round wire:
7217.30.30.00 With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon
kg
Free
7217.30.45 Other
Free
7217.30.45.04 Containing by weight less than 0.20 percent of carbon, and suitable for electric arc welding
kg
Other:
With a diameter of less than 1.0 mm:
7217.30.45.11 Containing by weight less than 0.25 percent of carbon
kg
7217.30.45.20 Containing by weight 0.25 percent or more but less than 0.6 percent or carbon
kg
7217.30.45.30 Containing by weight 0.6 percent or more of carbon
kg
With a diameter of 1.0 mm or more but less than 1.5 mm:
7217.30.45.41 Containing by weight less than 0.25 percent of carbon
kg
7217.30.45.50 Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
kg
7217.30.45.60 Containing by weight 0.6 percent or more of carbon
kg
7217.30.45.90 With a diameter of 1.5 mm or more
kg
Other:
7217.30.60.00 Containing by weight less than 0.25 percent of carbon
kg
Free
7217.30.75.00 Other
kg
Free
7217.90 Other:
7217.90.10.00 Coated with plastics
kg
Free
7217.90.50 Other
Free
7217.90.50.30 Containing by weight less than 0.25 percent of carbon
kg
7217.90.50.60 Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
kg
7217.90.50.90 Containing by weight 0.6 percent or more of carbon
kg
III. STAINLESS STEEL
7218 Stainless steel in ingots or other primary forms; semi-finished products of stainless steel:
7218.10.00.00 Ingots and other primary forms
kg
Free
Other:
7218.91.00 Of rectangular (other than square) cross-section
Free
Having a width less than four times the thickness:
7218.91.00.15 Having a cross-sectional area of less than 232 cm2
kg
7218.91.00.30 Having a cross-sectional area of 232 cm2 or more
kg
7218.91.00.60 Having a width at least four times the thickness
kg
7218.99.00 Other
Free
Of square cross section:
7218.99.00.15 Having a cross-sectional area of less than 232 cm2
kg
7218.99.00.30 Having a cross-sectional area of 232 cm2 or more
kg
Of circular cross section:
7218.99.00.45 Having a cross-sectional area of less than 232 cm2
kg
7218.99.00.60 Having a cross-sectional area of 232 cm2 or more
kg
7218.99.00.90 Other
kg
7219 Flat-rolled products of stainless steel, of a width of 600 mm or more:
Not further worked than hot-rolled, in coils:
7219.11.00 Of a thickness exceeding 10 mm
Free
7219.11.00.30 Of a width not exceeding 1575 mm
kg
7219.11.00.60 Of a width exceeding 1575 mm
kg
7219.12.00 Of a thickness of 4.75 mm or more but not exceeding 10 mm
Free
7219.12.00.02 Not annealed or not pickled
kg
Other:
7219.12.00.06 Of high-nickel alloy steel
kg
Other:
Of a width of 1370 mm or more:
Of a thickness exceeding 6.8 mm:
7219.12.00.21 Of a width not exceeding 1575 mm
kg
7219.12.00.26 Of a width exceeding 1575 mm
kg
Other:
7219.12.00.51 Of a width not exceeding 1575 mm
kg
7219.12.00.56 Of a width exceeding 1575 mm
kg
Other:
Containing more than 0.5 percent by weight of nickel:
7219.12.00.66 Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
kg
7219.12.00.71 Other
kg
7219.12.00.81 Other
kg
7219.13.00 Of a thickness of 3 mm or more but less than 4.75 mm
Free
7219.13.00.02 Not annealed or not pickled
kg
Other:
7219.13.00.31 Of a width of 1370 mm or more
kg
Other:
Containing more than 0.5 percent but less than 24 percent by weight of nickel:
7219.13.00.51 Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
kg
7219.13.00.71 Other
kg
7219.13.00.81 Other
kg
7219.14.00 Of a thickness of less than 3 mm
Free
7219.14.00.30 Of a width of 1370 mm or more
kg
Other:
7219.14.00.65 Of high-nickel alloy steel
kg
7219.14.00.90 Other
kg
Not further worked than hot-rolled, not in coils:
7219.21.00 Of a thickness exceeding 10 mm
Free
7219.21.00.05 Of high-nickel alloy steel
kg
Other:
7219.21.00.20 Of a width not exceeding 1575 mm
kg
7219.21.00.40 Of a width exceeding 1575 mm but not exceeding 1880 mm
kg
7219.21.00.60 Of a width exceeding 1880 mm
kg
7219.22.00 Of a thickness of 4.75 mm or more but not exceeding 10 mm
Free
7219.22.00.05 Of high-nickel alloy steel
kg
Other:
Containing more than 0.5 percent by weight of nickel:
Containing more than 1.5 percent but less than 5 percent by weight of molybdenum:
7219.22.00.15 Of a width not exceeding 1575 mm
kg
7219.22.00.20 Of a width exceeding 1575 mm but not exceeding 1880 mm
kg
7219.22.00.25 Of a width exceeding 1880 mm
kg
Other:
7219.22.00.35 Of a width not exceeding 1575 mm
kg
7219.22.00.40 Of a width exceeding 1575 mm but not exceeding 1880 mm
kg
7219.22.00.45 Of a width exceeding 1880 mm
kg
Other:
7219.22.00.70 Of a width not exceeding 1575 mm
kg
7219.22.00.75 Of a width exceeding 1575 mm but not exceeding 1880 mm
kg
7219.22.00.80 Of a width exceeding 1880 mm
kg
7219.23.00 Of a thickness of 3 mm or more but less than 4.75 mm
Free
7219.23.00.30 Of a width of 1370 mm or more
kg
7219.23.00.60 Other
kg
7219.24.00 Of a thickness of less than 3 mm
Free
7219.24.00.30 Of a width of 1370 mm or more
kg
7219.24.00.60 Other
kg
Not further worked than cold-rolled (cold-reduced):
7219.31.00 Of a thickness of 4.75 mm or more
Free
7219.31.00.10 In coils
kg
7219.31.00.50 Not in coils
kg
7219.32.00 Of a thickness of 3 mm or more but less than 4.75 mm
Free
In coils:
Of a width of 1370 mm or more:
7219.32.00.05 Of high-nickel alloy steel
kg
Other:
7219.32.00.20 Containing more than 0.5 percent by weight of nickel
kg
7219.32.00.25 Other
kg
Other:
7219.32.00.35 Of high-nickel alloy steel
kg
Other:
Containing more than 0.5 percent by weight of nickel:
7219.32.00.36 Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
kg
7219.32.00.38 Other
kg
Other:
7219.32.00.42 Containing less than 15 percent by weight of chromium
kg
7219.32.00.44 Other
kg
Not in coils:
7219.32.00.45 Of a width of 1370 mm or more
kg
7219.32.00.60 Other
kg
7219.33.00 Of a thickness exceeding 1 mm but less than 3 mm
Free
In coils:
Of a width of 1370 mm or more:
7219.33.00.05 Of high-nickel alloy steel
kg
Other:
7219.33.00.20 Containing more than 0.5 percent by weight of nickel
kg
7219.33.00.25 Other
kg
Other:
7219.33.00.35 Of high-nickel alloy steel
kg
Other:
Containing more than 0.5 percent by weight of nickel:
7219.33.00.36 Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
kg
7219.33.00.38 Other
kg
Other:
7219.33.00.42 Containing less than 15 percent by weight of chromium
kg
7219.33.00.44 Other
kg
Not in coils:
7219.33.00.45 Of a width of 1370 mm or more
kg
Other:
7219.33.00.70 Containing more than 0.5 percent but less than 24 percent by weight of nickel
kg
7219.33.00.80 Other
kg
7219.34.00 Of a thickness of 0.5 mm or more but not exceeding 1 mm
Free
In coils:
7219.34.00.05 Of high-nickel alloy steel
kg
Other:
Containing more than 0.5 percent by weight of nickel:
7219.34.00.20 Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
kg
7219.34.00.25 Other
kg
Other:
7219.34.00.30 Containing less than 15 percent by weight of chromium
kg
7219.34.00.35 Other
kg
7219.34.00.50 Not in coils
kg
7219.35.00 Of a thickness of less than 0.5 mm
Free
In coils:
Containing more than 0.5 percent but less than 24 percent by weight of nickel:
7219.35.00.05 Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
kg
7219.35.00.15 Other
kg
Other:
7219.35.00.30 Containing less than 15 percent by weight of chromium
kg
7219.35.00.35 Other
kg
7219.35.00.50 Not in coils
kg
7219.90.00 Other
Free
7219.90.00.10 Of high-nickel alloy steel
kg
Other:
Containing more than 0.5 percent by weight of nickel:
7219.90.00.20 Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
kg
7219.90.00.25 Other
kg
Other:
7219.90.00.60 Containing less than 15 percent by weight of chromium
kg
7219.90.00.80 Other
kg
7220 Flat-rolled products of stainless steel, of a width of less than 600 mm:
Not further worked than hot-rolled:
7220.11.00.00 Of a thickness of 4.75 mm or more
kg
Free
7220.12 Of a thickness of less than 4.75 mm:
7220.12.10.00 Of a width of 300 mm or more
kg
Free
7220.12.50.00 Of a width of less than 300 mm
kg
Free
7220.20 Not further worked than cold-rolled (cold-reduced):
7220.20.10 Of a width of 300 mm or more
Free
Containing more than 0.5 percent but less than 24 percent by weight of nickel:
7220.20.10.10 Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
kg
7220.20.10.15 Other
kg
Other:
7220.20.10.60 Containing less than 15 percent by weight of chromium
kg
7220.20.10.80 Other
kg
Of a width of less than 300 mm:
7220.20.60 Of a thickness exceeding 1.25 mm
Free
7220.20.60.05 Of high-nickel alloy steel
kg
Other:
Containing more than 0.5 percent by weight of nickel:
7220.20.60.10 Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
kg
7220.20.60.15 Other
kg
Other:
7220.20.60.60 Containing less than 15 percent by weight of chromium
kg
7220.20.60.80 Other
kg
7220.20.70 Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
Free
7220.20.70.05 Of high-nickel alloy steel
kg
Other:
Containing more than 0.5 percent by weight of nickel:
7220.20.70.10 Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
kg
7220.20.70.15 Other
kg
Other:
7220.20.70.60 Containing less than 15 percent by weight of chromium
kg
7220.20.70.80 Other
kg
Of a thickness not exceeding 0.25 mm:
7220.20.80.00 Razor blade steel
kg
Free
7220.20.90 Other
Free
7220.20.90.30 Containing more than 0.5 percent but less than 24 percent by weight of nickel
kg
7220.20.90.60 Other
kg
7220.90.00 Other
Free
Containing more than 0.5 percent but less than 24 percent by weight of nickel:
7220.90.00.10 Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
kg
7220.90.00.15 Other
kg
Other:
7220.90.00.60 Containing less than 15 percent by weight of chromium
kg
7220.90.00.80 Other
kg
7221.00.00 Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel
Free
7221.00.00.05 Of high-nickel alloy steel
kg
Other:
Of circular cross section:
With a diameter of less than 14 mm:
7221.00.00.17 Containing less than 8 percent by weight of nickel
kg
7221.00.00.18 Containing 8 percent or more but less than 24 percent by weight of nickel
kg
7221.00.00.30 With a diameter of 14 mm or more but less than 19 mm
kg
7221.00.00.45 With a diameter of 19 mm or more
kg
7221.00.00.75 Other
kg
7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel:
Bars and rods, not further worked than hot-rolled, hot-drawn or extruded:
7222.11.00 Of circular cross-section
Free
7222.11.00.01 Electroslag or vacuum arc remelted
kg
7222.11.00.06 Of high-nickel alloy steel
kg
Other:
With a maximum cross-sectional dimension of less than 152.4 mm:
7222.11.00.57 Containing less than 8 percent by weight of nickel
kg
7222.11.00.59 Containing 8 percent or more but less than 24 percent by weight of nickel
kg
With a maximum cross-sectional dimension of 152.4 mm or more:
7222.11.00.82 Containing less than 8 percent by weight of nickel
kg
7222.11.00.84 Containing 8 percent or more but less than 24 percent by weight of nickel
kg
7222.19.00 Other
Free
7222.19.00.01 Electroslag or vacuum arc remelted
kg
Other:
7222.19.00.06 Of high-nickel alloy steel
kg
Other:
7222.19.00.52 Containing less than 8 percent by weight of nickel
kg
7222.19.00.54 Containing 8 percent or more but less than 24 percent by weight of nickel
kg
7222.20.00 Bars and rods, not further worked than cold-formed or cold-finished
Free
7222.20.00.01 Electroslag or vacuum arc remelted
kg
7222.20.00.06 Of high-nickel alloy steel
kg
Other:
Of a circular cross-section:
With a maximum circular cross-sectional dimension of less than 18 mm:
7222.20.00.41 Containing less than 8 percent by weight of nickel
kg
7222.20.00.43 Containing 8 percent or more but less than 24 percent by weight of nickel
kg
With a maximum circular cross-sectional dimension of 18 mm or more and less than 152.4 mm:
7222.20.00.62 Containing less than 8 percent by weight of nickel
kg
7222.20.00.64 Containing 8 percent or more but less than 24 percent by weight of nickel
kg
With a maximum circular cross-sectional dimension of 152.4 mm or more:
7222.20.00.67 Containing less than 8 percent by weight of nickel
kg
7222.20.00.69 Containing 8 percent or more but less than 24 percent by weight of nickel
kg
Other:
7222.20.00.71 Containing less than 8 percent by weight of nickel
kg
7222.20.00.73 Containing 8 percent or more but less than 24 percent by weight of nickel
kg
7222.30.00 Other bars and rods
Free
7222.30.00.01 Electroslag or vacuum arc remelted
kg
7222.30.00.12 Of high-nickel alloy steel
kg
Other:
With a maximum cross-sectional dimension of less than 152.4 mm:
7222.30.00.22 Containing less than 8 percent by weight of nickel
kg
7222.30.00.24 Containing 8 percent or more but less than 24 percent by weight of nickel
kg
With a maximum cross-sectional dimension of 152.4 mm or more:
7222.30.00.82 Containing less than 8 percent by weight of nickel
kg
7222.30.00.84 Containing 8 percent or more but less than 24 percent by weight of nickel
kg
7222.40 Angles, shapes and sections:
7222.40.30 Hot-rolled, not drilled, not punched and not otherwise advanced
Free
With a maximum cross-sectional dimension of 80 mm or more:
7222.40.30.25 Angles
kg
7222.40.30.45 Other
kg
With a maximum cross-sectional dimension of less than 80 mm:
7222.40.30.65 Angles
kg
7222.40.30.85 Other
kg
7222.40.60.00 Other
kg
Free
7223.00 Wire of stainless steel:
7223.00.10 Round wire
Free
7223.00.10.05 Spring round wire of a kind described in statistical note 8 to this chapter
kg
Other:
7223.00.10.16 With a diameter of less than 0.25 mm
kg
7223.00.10.31 With a diameter of 0.25 mm or more but less than 0.76 mm
kg
7223.00.10.46 With a diameter of 0.76 mm or more but less than 1.52 mm
kg
7223.00.10.61 With a diameter of 1.52 mm or more but less than 5.1 mm
kg
7223.00.10.76 With a diameter of 5.1 mm or more
kg
7223.00.50.00 Flat wire
kg
Free
7223.00.90.00 Other
kg
Free
IV. OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NONALLOY STEEL
7224 Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel:
7224.10.00 Ingots and other primary forms
Free
7224.10.00.05 Of high-nickel alloy steel
kg
Other:
7224.10.00.45 Of tool steel
kg
7224.10.00.75 Other
kg
7224.90.00 Other
Free
7224.90.00.05 Of high-nickel alloy steel
kg
Other:
Of tool steel:
Of rectangular (including square) cross section:
7224.90.00.15 Having a width less than four times the thickness
kg
7224.90.00.25 Having a width at least four times the thickness
kg
7224.90.00.35 Other
kg
Other:
Of rectangular (including square) cross section:
7224.90.00.45 Having a width less than four times the thickness
kg
7224.90.00.55 Having a width at least four times the thickness
kg
7224.90.00.65 Of circular cross section
kg
7224.90.00.75 Other
kg
7225 Flat-rolled products of other alloy steel, of a width of 600 mm or more:
Of silicon electrical steel:
7225.11.00.00 Grain-oriented
kg
Free
7225.19.00.00 Other
kg
Free
7225.30 Other, not further worked than hot-rolled, in coils:
Of a thickness of 4.75 mm or more:
7225.30.11 Of tool steel
Free
7225.30.11.10 Of high-speed steel
kg
7225.30.11.80 Other
kg
7225.30.30 Other
Free
7225.30.30.05 Of high-nickel alloy steel
kg
7225.30.30.50 Other
kg
Of a thickness of less than 4.75 mm:
7225.30.51 Of tool steel
Free
7225.30.51.10 Of high-speed steel
kg
7225.30.51.80 Other
kg
7225.30.70.00 Other
kg
Free
7225.40 Other, not further worked than hot-rolled, not in coils:
Of a thickness of 4.75 mm or more:
7225.40.11 Of tool steel
Free
7225.40.11.10 Of high-speed steel
kg
7225.40.11.80 Other
kg
7225.40.30 Other
Free
7225.40.30.05 Of high-nickel alloy steel
kg
7225.40.30.50 Other
kg
Of a thickness of less than 4.75 mm:
7225.40.51 Of tool steel
Free
7225.40.51.10 Of high-speed steel
kg
7225.40.51.30 Of ball-bearing steel
kg
7225.40.51.60 Other
kg
7225.40.70.00 Other
kg
Free
7225.50 Other, not further worked than cold-rolled (cold-reduced):
7225.50.11 Of tool steel
Free
7225.50.11.10 Of high-speed steel
kg
7225.50.11.30 Of ball-bearing steel
kg
7225.50.11.60 Other
kg
Other:
7225.50.60.00 Of a thickness of 4.75 mm or more
kg
Free
Of a thickness of less than 4.75 mm:
7225.50.70.00 Heat-resisting steel
kg
Free
7225.50.80 Other
Free
7225.50.80.10 Of high-nickel alloy steel
kg
7225.50.80.80 Other
kg
Other:
7225.91.00.00 Electrolytically plated or coated with zinc
kg
Free
7225.92.00.00 Otherwise plated or coated with zinc
kg
Free
7225.99.00 Other
Free
7225.99.00.10 Of high-nickel alloy steel
kg
7225.99.00.90 Other
kg
7226 Flat-rolled products of other alloy steel, of a width of less than 600 mm:
Of silicon electrical steel:
7226.11 Grain-oriented:
7226.11.10.00 Of a width of 300 mm or more
kg
Free
7226.11.90 Of a width of less than 300 mm
Free
7226.11.90.30 Of thickness not exceeding 0.25 mm
kg
7226.11.90.60 Other
kg
7226.19 Other:
7226.19.10.00 Of a width of 300 mm or more
kg
Free
7226.19.90.00 Of a width of less than 300 mm
kg
Free
7226.20.00.00 Of high-speed steel
kg
Free
Other:
7226.91 Not further worked than hot-rolled:
Of tool steel (other than high-speed steel):
7226.91.05.00 Of chipper knife steel
kg
Free
Other:
7226.91.15 Of a width of 300 mm or more
Free
7226.91.15.30 Of ball-bearing steel
kg
7226.91.15.60 Other
kg
7226.91.25 Of a width of less than 300 mm
Free
7226.91.25.30 Of ball-bearing steel
kg
7226.91.25.60 Other
kg
Other:
7226.91.50.00 Of a thickness of 4.75 mm or more
kg
Free
Of a thickness of less than 4.75 mm:
7226.91.70.00 Of a width of 300 mm or more
kg
Free
7226.91.80.00 Of a width of less than 300 mm
kg
Free
7226.92 Not further worked than cold-rolled (cold-reduced):
Of tool steel (other than high-speed steel):
7226.92.10 Of a width of 300 mm or more
Free
7226.92.10.30 Of ball-bearing steel
kg
7226.92.10.60 Other
kg
7226.92.30 Of a width of less than 300 mm
Free
7226.92.30.30 Of ball-bearing steel
kg
7226.92.30.60 Other
kg
Other:
7226.92.50.00 Of a width of 300 mm or more
kg
Free
Of a width of less than 300 mm:
7226.92.70 Of a thickness not exceeding 0.25 mm
Free
7226.92.70.05 Of high-nickel alloy steel
kg
7226.92.70.50 Other
kg
7226.92.80 Of a thickness exceeding 0.25 mm
Free
7226.92.80.05 Of high-nickel alloy steel
kg
7226.92.80.50 Other
kg
7226.99.01 Other
Free
7226.99.01.10 Electrolytically plated or coated with zinc
kg
7226.99.01.30 Otherwise plated or coated with zinc
kg
7226.99.01.80 Other
kg
7227 Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel:
7227.10.00.00 Of high-speed steel
kg
Free
7227.20.00 Of silico-manganese steel
Free
7227.20.00.30 Of welding quality wire rods of a kind described in statistical note 7 to this chapter
kg
7227.20.00.80 Other
kg
7227.90 Other:
Of tool steel (other than high-speed steel):
7227.90.10 Not tempered, not treated, and not partly manufactured
Free
7227.90.10.30 Of ball-bearing steel
kg
7227.90.10.60 Other
kg
7227.90.20 Other
Free
7227.90.20.30 Of ball-bearing steel
kg
7227.90.20.60 Other
kg
7227.90.60 Other
Free
7227.90.60.05 Of high-nickel alloy steel
kg
7227.90.60.10 Of Cold Heading Quality (CHQ) steel of a kind described in statistical note 6 to this chapter
kg
7227.90.60.20 Of welding quality wire rods of a kind described in statistical note 7 to this chapter
kg
Of a circular cross section:
7227.90.60.30 With a diameter of less than 14 mm
kg
7227.90.60.35 With a diameter of 14 mm or more but less than 19 mm
kg
7227.90.60.40 With a diameter of 19 mm or more
kg
7227.90.60.90 Other
kg
7228 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel:
7228.10.00 Bars and rods, of high-speed steel
Free
7228.10.00.10 Not cold-formed
kg
Cold-formed:
7228.10.00.30 With a maximum cross-sectional dimension of less than 18 mm
kg
7228.10.00.60 With a maximum cross-sectional dimension of 18 mm or more
kg
7228.20 Bars and rods, of silico-manganese steel:
7228.20.10.00 Not cold-formed
kg
Free
7228.20.50.00 Cold-formed
kg
Free
Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded:
7228.30 Of tool steel (other than high-speed steel):
7228.30.20.00 Of ball-bearing steel
kg
Free
7228.30.40.00 Of chipper knife steel, not cold-formed
kg
Free
7228.30.60.00 Other
kg
Free
7228.30.80 Other
Free
7228.30.80.05 Of high-nickel alloy steel
kg
7228.30.80.10 Concrete reinforcing bars and rods
kg
Other:
7228.30.80.15 With a diameter or cross section measuring less than 76 mm
kg
7228.30.80.41 With a diameter or cross section measuring 76 mm or more but not exceeding 152 mm
kg
7228.30.80.45 With a diameter or cross section measuring 152 mm or more but not exceeding 228 mm
kg
7228.30.80.70 With a diameter or cross section exceeding 228 mm
kg
7228.40.00.00 Other bars and rods, not further worked than forged
kg
Free
7228.50 Other bars and rods, not further worked than cold-formed or cold-finished:
7228.50.10 Of tool steel (other than high-speed steel)
Free
7228.50.10.10 Of ball-bearing steel
kg
Other:
With a maximum cross-sectional dimension of less than 18 mm:
7228.50.10.20 Of round or rectangular cross section with surfaces ground, milled or polished
kg
7228.50.10.40 Other
kg
With a maximum cross-sectional dimension of 18 mm or more:
7228.50.10.60 Of round or rectangular cross section with surfaces ground, milled or polished
kg
7228.50.10.80 Other
kg
7228.50.50 Other
Free
7228.50.50.05 Of high-nickel alloy steel
kg
Other:
7228.50.50.15 With a diameter or cross section measuring less than 76 mm
kg
7228.50.50.40 With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm
kg
7228.50.50.70 With a diameter or cross section exceeding 228 mm
kg
7228.60 Other bars and rods:
7228.60.10 Of tool steel (other than high-speed steel)
Free
7228.60.10.30 Of ball-bearing steel
kg
7228.60.10.60 Other
kg
Other:
7228.60.60.00 Not cold-formed
kg
Free
7228.60.80.00 Cold-formed
kg
Free
7228.70 Angles, shapes and sections:
7228.70.30 Hot-rolled, not drilled, not punched and not otherwise advanced
Free
7228.70.30.10 U, I, H and T sections
kg
Other:
With a maximum cross-sectional dimension of 76 mm or more:
7228.70.30.20 Angles
kg
7228.70.30.41 Other
kg
With a maximum cross-sectional dimension of less than 76 mm:
7228.70.30.60 Angles
kg
7228.70.30.81 Other
kg
7228.70.60.00 Other
kg
Free
7228.80.00.00 Hollow drill bars and rods
kg
Free
7229 Wire of other alloy steel:
7229.20.00 Of silico-manganese steel
Free
Round, with a diameter of less than or equal to 1.6 mm, containing by weight less than 0.20 percent of carbon, more than 0.9 percent of manganese, and more than 0.6 percent of silicon, and suitable for electric arc welding:
7229.20.00.10 Plated or coated with copper
kg
7229.20.00.15 Other
kg
7229.20.00.90 Other
kg
7229.90 Other:
7229.90.05.00 Of high-speed steel
kg
Free
Other:
7229.90.10.00 Flat wire
kg
Free
7229.90.50 Round wire
Free
With a diameter of less than or equal to 1.6 mm, containing by weight less than 0.20 percent of carbon and more than 0.3 percent of nickel or more than 0.08 percent of molybdenum, and suitable for electric arc welding:
7229.90.50.06 Plated or coated with copper
kg
7229.90.50.08 Other
kg
Other:
7229.90.50.16 With a diameter of less than 1.0 mm
kg
7229.90.50.31 With a diameter of 1.0 mm or more but less than 1.5 mm
kg
7229.90.50.51 With a diameter of 1.5 mm or more
kg
7229.90.90.00 Other wire
kg
Free

Frequently Asked Questions

What does HTS Chapter 72 cover? ▼
HTS Chapter 72 covers Iron and steel. It contains 949 individual tariff classifications, of which 262 have specified duty rates. This chapter falls under Section XV (Base Metals and Articles of Base Metal).
What is the average tariff rate for Chapter 72? ▼
The average general (MFN) duty rate across all tariff lines in Chapter 72 is 0.3%. The highest individual rate in this chapter is 10%. Actual duty on a specific product depends on its precise HTS classification.
How do I find the correct HTS code for my product? ▼
Browse the tariff lines listed below organized by heading and subheading. Each item with an HTS number links to its full detail page showing general, special, and Column 2 duty rates. For complex classifications, consult a licensed customs broker or contact US Customs and Border Protection (CBP).
Are there any duty-free items in Chapter 72? ▼
Yes, many chapters contain items with a "Free" general rate, meaning no duty is assessed for imports from most-favored-nation countries. Look for items marked "Free" in the tariff lines table below. Additional preferential rates may also apply under free trade agreements.
Where does PlainTariff get its tariff data? ▼
All tariff data comes from the U.S. International Trade Commission (USITC) Harmonized Tariff Schedule (HTS) 2026 Basic Edition, the official schedule of US import duties.

Learn More About Tariffs

📖

How Tariffs Work

A plain-language guide to US import duties

 🔍

Reading HTS Codes

How to decode the Harmonized Tariff Schedule

 📊

Most Tariffed Products

Which US imports carry the highest duties

 💰

Tariffs & Consumer Prices

How import duties affect what you pay

Next steps

Find the exact rate for your product within Chapter 72.

The chapter average is an orientation only, duty is set per tariff line, and Special preferential rates may apply to qualifying origins.

Related

Browse all → | Rankings →

Sources: U.S. International Trade Commission Harmonized Tariff Schedule (2026 Basic Edition) and FAO FAOSTAT Trade: Crops and Livestock. See our methodology for how figures are computed.

Every figure on PlainTariff is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.