PlainTariff

Browse HTS Tariff Lines

Explore all 13,855 US Harmonized Tariff Schedule tariff lines

HTS Number Description Rate
9903.04.50 Brandy (other than pisco, singani and slivowitz), in containers each holding not over 3.8 liters, valued over $3.43 per liter (provided for in subheading 2208.20.40 or 2208.90.30) 200%
9903.04.55 Gin, in containers each holding not over 3.8 liters (provided for in subheading 2208.50) 200%
9903.08.04 Bath preparations, other than bath salts (provided for in subheading 3307.30.50) 100%
9903.08.07 Handbags, whether or not with shoulder strap, including those without handle, with outer surface of sheeting of plastic (provided for in subheading 4202.22.15) 100%
9903.08.08 Articles of a kind normally carried in the pocket or in the handbag, with outer surface of sheeting of plastic, of reinforced or laminated plastics (provided for in subheading 4202.32.10) 100%
9903.08.09 Uncoated felt paper and paperboard in rolls or sheets (provided for in subheading 4805.50) 100%
9903.08.10 Folding cartons, boxes and cases, of noncorrugated paper or paperboard (provided for in subheading 4819.20) 100%
9903.08.11 Lithographs on paper or paperboard, not over 0.51 mm in thickness, printed not over 20 years at time of importation (provided for in subheading 4911.91.20) 100%
9903.08.13 Bed linen, other than knit or crocheted, printed, of cotton, other than containing any embroidery, lace, braid, edging, trimming, piping or applique work, not napped (provided for in subheading 6302.21.90) 100%
9903.08.14 Lead-acid storage batteries, other than of a kind used for starting piston engines or as the primary source of electrical power for electrically powered vehicles of subheading 8703.80.00 and 8703.90.01 (provided for in subheading 8507.20.80) 100%
9903.08.15 Electrothermic coffee or tea makers, of a kind used for domestic purposes (provided for in subheading 8516.71) 100%
9903.19.19 Provided for in subheading 1901.10.16, 1901.10.26, 1901.10.36 or 1901.10.44 Free
9903.19.20 Provided for in subheading 1901.10.29 or 1901.10.49 Free
9903.19.21 Provided for in subheading 2106.90.97 Free
9903.19.22 Provided for in subheading 2106.90.99 Free
9903.19.23 Provided for in subheading 1901.90.62 [Compiler's note: Subheading was enacted; expired at the close of Dec. 31, 2022] Free
9903.27.01 Distillate and residual fuel oils (including blended fuel oils) and wastes of distillate and residual fuel oils (whether or not blended) (provided for in subheading 2710.19.06, 2710.19.11, 2710.20.05, 2710.20.10, 2710.99.05 or 2710.99.10) 100%
9903.27.02 Rare gases, other than argon (provided for in subheading 2804.29.00) 100%
9903.27.03 Germanium oxides and zirconium dioxide (provided for in subheading 2825.60.00) 100%
9903.27.04 Carbides of silicon (provided for in subheading 2849.20.10 or 2849.20.20) 100%
9903.27.05 Other mineral or chemical fertilizers, containing nitrates and phosphates (provided for in subheading 3105.51.00) 100%
9903.27.06 Pigments and preparations based on titanium dioxide (provided for in subheading 3206.11.00 or 3206.19.00) 100%
9903.27.07 Other uncoated, unbleached kraft paper and paperboard, in rolls or sheets, weighing 225 g/m2 or more (provided for in subheading 4804.51.00) 100%
9903.27.08 Other footwear with outer soles of rubber, plastics or composition leather and uppers of leather (provided for in subheading 6403.99.60, 6403.99.75 or 6403.99.90) 100%
9903.27.09 Other footwear with outer soles of rubber or plastics and uppers of textile materials, with open toes or open heels, or of the slip-on type (provided for in subheading 6404.19.35) 100%
9903.27.10 Diamonds, unsorted (provided for in subheading 7102.10.00) 100%
9903.27.11 Diamonds, nonindustrial (provided for in subheading 7102.31.00 or 7102.39.00) 100%
9903.27.12 Catalysts in the form of wire cloth or grill, of platinum (provided for in subheading 7115.10.00) 100%
9903.27.13 Unrefined copper; copper anodes for electrolytic refining (provided for in heading 7402.00.00) 100%
9903.27.14 Other unwrought aluminum alloys (provided for in subheading 7601.20.90) 100%
9903.27.15 Other refrigerating or freezing equipment; heat pumps (provided for in subheading 8418.69.00) 100%
9903.40.05 Radial tires of a kind used on motor cars (other than racing cars), station wagons, sport utility vehicles, vans and on-the-highway light trucks (provided for in subheading 4011.10.10 or 4011.20.10) 25%
9903.40.10 Other tires of a kind used on motor cars (other than racing cars), station wagons, sport utility vehicles, vans and on-the-highway light trucks (provided for in subheading 4011.10.50 or 4011.20.50) 25%
9903.41.05 Bovine (including buffalo) and equine leather (provided for in heading 4104 or 4107); goat, kid, sheep and lamb leather, the foregoing dyed, colored, stamped or embossed (provided for in heading 4105, 4106, 4112 or 4113) 40%
9903.41.10 Footwear with outer soles of leather and uppers wholly or in part of leather, and footwear with outer soles of rubber or plastics and uppers having an exterior surface area predominantly of leather, the foregoing provided for in chapter 64, except (a) slip-on footwear of a type not suitable for outdoor use, without backs or backstraps, having outer soles with a thickness of less than 5 mm and with less than 20 mm difference between the thickness of the bottom at the ball of the foot and at the heel, and (b) footwear which is designed for a sporting activity and has, or has provision for, attached spikes, sprigs, stops, clips, bars or the like, and skating boots, ski-boots and cross-country ski footwear, wrestling boots, boxing boots and cycling shoes 40%
9903.41.15 Automatic data processing machines, of the type of which the constituent units are integrated in the same housing, whether finished or unfinished, which incorporate a microprocessor-based calculating mechanism, are capable of handling data words of at least 16-bits off the microprocessor, and are designed for use with a non-cathode-ray tube (non-CRT) display unit, whether or not capable of use without an external power source (provided for in subheading 8471.30 or 8471.41) 100%
9903.41.20 Having a microprocessor-based calculating mechanism capable of directly handling memory of over 8 megabits (provided for in subheading 8471.49.10 or 8471.50) 100%
9903.41.25 Having a microprocessor-based calculating mechanism capable of directly handling memory of not over 8 megabits (provided for in subheading 8471.49.10 or 8471.50) 100%
9903.41.30 Electropneumatic rotary and percussion hammers (provided for in subheading 8467.29) 100%
9903.41.35 Other (provided for in subheading 8467.21 or 8467.29) 100%
9903.41.40 Complete color television receivers containing in a single housing apparatus for receiving and displaying off-the-air each standard U.S. broadcast channel, with or without external speakers, having a single picture tube intended for direct viewing, with a video display diagonal exceeding 45 cm but not exceeding 50 cm (provided for in subheading 8528.72.32 or 8528.72.48) 100%
9903.41.45 Complete color television receivers containing in a single housing apparatus for receiving and displaying off-the-air each standard U.S. broadcast channel, with or without external speakers, having a single picture tube intended for direct viewing, with a video display diagonal exceeding 50 cm but not exceeding 52 cm (provided for in subheading 8528.72.32 or 8528.72.48) 100%
9903.45.01 If entered in an aggregate quantity, in any quarterly period specified in note 17(i) to this subchapter, not exceeding 300,000 units in any such quarterly period, under the terms of such note 14%
9903.45.02 Other 30%
9903.45.05 If entered in an annual aggregate quantity not exceeding the quantity specified in note 17(g) to this subchapter, under the terms of such note No change
9903.45.06 Other 30%
9903.45.21 If entered in an annual aggregate quantity not exceeding 12.5 gigawatts, under the terms of such note No change
9903.45.22 Other 30%
9903.45.25 Modules as defined in note 18(g) to this subchapter, when the product or originating good of a country other than a country described in note 18(b) to this subchapter, except as provided in heading 9903.45.27 or heading 9903.45.29 30%
9903.45.27 Crystalline silicon photovoltaic cells, as defined in note 18(c) to this subchapter, and modules as defined in note 18(g) to this subchapter, all the foregoing when the product and originating good of Canada No change

How the Harmonized Tariff Schedule is organized

The Harmonized Tariff Schedule of the United States (HTSUS) is the codified system U.S. Customs and Border Protection uses to assign duty rates to imported goods. It is published by the U.S. International Trade Commission (USITC) and updated when trade-policy actions take effect — presidential proclamations, antidumping orders, Section 301 actions, and free-trade-agreement implementations. The schedule has 22 sections, 99 chapters, and roughly 18,000 individual tariff lines. Each tariff line has a 10-digit HTS code where the first 6 digits map to the international Harmonized System (HS) maintained by the World Customs Organization, the next two digits identify the U.S. statistical heading, and the final two digits are the U.S. statistical suffix used for trade-data reporting.

Browsing tariff lines alphabetically (the letter-paged index) is one of three primary navigation paths PlainTariff offers — alongside section/chapter hierarchy and product-keyword search. Alphabetic browse is useful when the importer or researcher has a partial product name but does not know which chapter or section the product falls under. A surprising number of tariff lines are organized by common product names (apples, automobiles, batteries) rather than by industry taxonomy, so alphabetic browse often surfaces relevant lines faster than hierarchical drill-down.

Reading a tariff line page

Each tariff-line detail page shows the General (MFN) duty rate, any Special preferential rates available under free trade agreements (USMCA, GSP, CAFTA-DR, KORUS, JAPAN, etc.), and the Column 2 rate that applies to imports from non-MFN countries (currently Cuba and North Korea). Rates can be expressed as ad valorem (a percentage of customs value), specific (a dollar amount per unit of quantity), or compound (a combination of both). The detail page preserves the original rate text exactly as published by USITC and additionally extracts a numeric percentage where applicable to enable comparison and ranking.

Beyond the duty rate itself, the detail page surfaces the unit of quantity that customs uses for the line, the chapter and section it belongs to, and any additional duties that apply — antidumping (AD), countervailing (CVD), Section 201 safeguards, or Section 301 tariffs. The chapter context matters because two products with very similar descriptions can sit in different chapters with very different rates: for example, certain food products straddle the chapter boundary between agricultural commodity and prepared food, where the prepared-food chapter frequently carries 2-3x the duty rate of the raw commodity chapter.

Compliance use cases

Importers use the alphabetic browse to validate classifications a customs broker has proposed for a shipment, to find duty rates while sourcing new products, and to identify free-trade-agreement opportunities that might reduce the effective duty rate on already-imported product categories. Researchers and journalists use the browse to write about tariff incidence by product, to track which categories have been most affected by recent Section 301 actions, and to compare U.S. duty rates with rates in partner countries. Small business owners use it to estimate landed cost when evaluating whether to import directly rather than through a domestic distributor.

For binding classification determinations, always verify against the official USITC HTS site and consult a licensed customs broker. PlainTariff is an unofficial reference tool — it preserves USITC data faithfully but does not provide formal customs advice. Classification errors at the border can result in shipment delays, post-entry duty adjustments, or penalties under 19 USC 1592.

How tariff rates connect to consumer prices

Import duties feed into landed cost, which in turn feeds into wholesale and ultimately retail pricing for imported goods. The pass-through is rarely 1:1 — retailers may absorb part of the duty cost, importers may renegotiate supplier terms, and currency movements can offset or amplify the duty effect. Academic research on the 2018-2019 Section 301 tariffs found roughly 95% pass-through to U.S. wholesale prices within 6 months, with smaller and more delayed effects on retail. The implication for PlainTariff readers: an MFN duty rate increase is a real cost to importers, but the magnitude that reaches end consumers depends on competitive dynamics in the downstream supply chain.

Tariff incidence — who bears the economic cost — is technically a different question from statutory incidence (who legally pays the duty to CBP). The duty is paid by the importer of record at entry, but the economic burden can shift to exporters (via lower wholesale prices), domestic competitors (via increased market share), or consumers (via higher retail prices). Most economic studies of recent tariff actions find that the bulk of the economic incidence on consumer goods has fallen on U.S. importers and consumers rather than on foreign exporters.

Trade-program preferences worth knowing about

Beyond the standard MFN rates, several preference programs can substantially reduce or eliminate duty on qualifying imports. USMCA covers Canada and Mexico and provides duty-free treatment for goods that meet rules of origin (which can be complex — automotive, textile, and agricultural ROOs are particularly stringent). CAFTA-DR covers Central American countries and the Dominican Republic. KORUS covers Korea. JAPAN, AUSTRALIA, ISRAEL, and BAHRAIN each have bilateral FTAs with product-specific carve-outs. GSP (Generalized System of Preferences) provides duty-free entry for qualifying developing-country goods.

Each preference program has its own claim procedure — generally an importer self-certification at entry, supported by supplier documentation that the goods meet the program's rules of origin. Misclaimed preferences are a frequent source of post-entry duty assessments and penalties, so importers should consult a licensed customs broker before claiming a preference for the first time on a new product or supplier combination.