PlainTariff

Browse HTS Tariff Lines

Explore all 13,855 US Harmonized Tariff Schedule tariff lines

HTS Number Description Rate
9902.17.23 Liquid crystal display (LCD) television panel assemblies, each with a video display diagonal measuring over 99.06 cm but not over 101.6 cm (provided for in subheading 9013.80.90) Free
9902.17.24 Liquid crystal display (LCD) television panel assemblies, each with a video display diagonal measuring over 101.6 cm but not over 124.46 cm (provided for in subheading 9013.80.90) Free
9902.17.25 Liquid crystal display (LCD) television panel assemblies, each with a video display diagonal measuring over 124.46 cm but not over 137.16 cm (provided for in subheading 9013.80.90) Free
9902.17.26 Liquid crystal display (LCD) television panel assemblies, each with a video display diagonal measuring over 137.16 cm (provided for in subheading 9013.80.90) Free
9902.17.27 Optical attenuators designed to reduce the power level of an optical signal, either in free space or in an optical fiber, such instruments or apparatus specifically designed for telecommunications (provided for in subheading 9013.80.90). Free
9902.17.28 Bicycle speedometers (provided for in 9029.20.20) Free
9902.17.29 Oscilloscopes and oscillographs, having a bandwidth range of 20 GHz to 90 GHz and a sampling rate range of 50 megabytes per second (50 Mbps) to 80 gigabytes per second (80 Gbps), each with 1 to 16 measurement channels, internal hard drive, 1 to 4 interchangeable measurement modules and a color touch screen measuring over 25 cm but not over 28 cm (provided for in subheading 9030.20.10), the foregoing other than hand-held Free
9902.17.30 Hand-held oscilloscopes (provided for in subheading 9030.20.10) Free
9902.17.31 Multimeters, each without recording device, not intended to be hand-held, having either 4-1/2, 5-1/2, 6-1/2, 7-1/2 or 8-1/2 digits of measurement accuracy, with or without LXI (LAN extension for instruments) standard and with either a color or non-color single or dual display screen (provided for in subheading 9030.31.00). Free
9902.17.32 True RMS (root mean square) multimeters, without recording device, hand-held, each having either 3-1/2, 4 or 4-1/2 digits of measurement accuracy and either a liquid crystal display (LCD) or organic light emitting diode (OLED) display screen, designed to provide one or more of the following measurements: DCV, ACV, DCI, ACI, 2 and/or 4 wire resistance, frequency, continuity, diode test, capacitance, temperature, dB, switch counter, harmonic ratio, pulse width, delay cycle and/or 4 to 20 mA percent scale (provided for in subheading 9030.31.00). Free
9902.17.33 PXI 6-1/2 digit digital multimeters (DMM), each without recording device, not intended to be hand-held, having 6-1/2 digit of measurement accuracy, designed to provide basic measurements that may include DCV, ACV, DCI, ACI, 2 and 4 wire resistance, frequency, period, capacitance, temperature, duty cycle, counter and DC source (provided for in subheading 9030.31.00) Free
9902.17.34 Digital multimeters, each having 8.5 digit resolution and having a recording device, certified by the importer as having 3 ppm direct current volts (DCV) accuracy (provided for in subheading 9030.32.00) Free
9902.17.35 Impedance analyzers, having a frequency range of 20 Hz to 120 MHz and plus or minus 42 V peak maximum output, each with 1 to 4 measurement channels, a recording device and a color touch screen measuring over 25 cm but not over 28 cm (provided for in subheading 9030.84.00). Free
9902.17.36 Electromagnetic interference (EMI) receivers, each having a frequency band range from 3 Hz to 44 GHz, conforming to LXI (Local area network eXtension for Instruments) standard, with two radio frequency (RF) inputs and with a color display screen with a display diagonal exceeding 20 cm but not exceeding 23 cm (provided for in subheading 9030.84.00). Free
9902.17.37 Multifunction devices for calibrating electrical safety testers, each incorporating signal generator and multimeter, with a recording device (provided for in subheading 9030.84.00) Free
9902.17.38 Local area network (LAN) eXtensions for Instrumentation (LXI) data acquisition/switch units, each having both a universal serial bus (USB) and LAN terminal using the LXI standard, having a 3-slot mainframe in rear for plug-in modules, capable of measuring 11 different input signals and having a built-in digital multimeter (DMM) with 6-1/2 digits (22 bits) of resolution (provided for in subheading 9030.89.01). Free
9902.17.39 Signal generators, certified by the importer to be used for calibrating oscilloscopes, the foregoing each with five channels and no recording device (provided for in subheading 9030.89.01) Free
9902.17.40 Signal generators, certified by the importer to be used for calibrating radio frequency measurement equipment, each presented without a recording device (provided for in subheading 9030.89.01) Free
9902.17.41 Output-only signal generators, each with configurable phases and harmonics designed for calibrating power and energy equipment, the foregoing without a recording device (provided for in subheading 9030.89.01). Free
9902.17.42 Battery-operated chiming melody clock movements, complete and assembled, valued over $5 each, suitable for use in the production of grandfather clocks, wall clocks and mantel clocks (provided for in subheading 9109.10.80) Free
9902.17.43 Mechanical clock movements, presented complete and assembled, valued over $5 each, suitable for use in the production of grandfather clocks, wall clocks or mantel clocks (provided for in subheading 9109.90.60) Free
9902.17.44 Chime melody rod assemblies and parts thereof, the foregoing suitable for use in the production of grandfather clocks, wall clocks and mantel clocks (provided for in subheading 9114.90.50) Free
9902.17.45 Pillows, cushions and similar furnishings of cotton, each measuring over 4,000 cm² (provided for in subheading 9404.90.10) 3.1%
9902.17.46 Pillows, cushions and similar furnishings, the foregoing of materials other than cotton, each measuring over 4,000 cm² (provided for in subheading 9404.90.20) 5.3%
9902.17.47 Electric light emitting diode (LED) lighting fittings, of base metal other than of brass, whether ceiling (hanging) or wall mounted, each with LED light source concealed above a quartz cylinder and designed to create a total internal reflection (provided for in subheading 9405.10.60) Free
9902.17.48 Electric table or desk light-emitting diode (LED) task lamps, of base metal other than of brass, each with interchangeable mounting options including bases, clamps or other mounts (provided for in subheading 9405.20.60) 3.0%
9902.17.49 Electric table or desk light-emitting diode (LED) task lamps, of base metal other than of brass, each with ball joints to allow multiple positions of the lamp head relative to the base (provided for in subheading 9405.20.60) Free
9902.17.50 Electric table or desk light-emitting diode (LED) task lamps, of base metal other than of brass, each incorporating a reflector designed to reflect light from the LED in the stem of the lamp (provided for in subheading 9405.20.60) Free
9902.17.51 Light emitting diode (LED) motion-activated security lantern kits, of a kind used for exterior lighting, such lanterns of base metal and having antique bronze finish, each with frosted glass, with an integrated photocell and motion sensor, and with a wall mounting bracket (provided for in subheading 9405.40.60) 3.8%
9902.17.52 Emergency lights, of base metal other than of brass, round or elongated in shape, measuring between 6 and 12 cm in height, each containing incandescent lamp, lamp holder, reflector, clear glass lens with drain hole, pressure can and electrical pigtail with connector; the foregoing configured to be mounted to the exterior of an aircraft and designed for illuminating egress paths on or around the aircraft during an emergency evacuation (provided for in subheading 9405.40.60) Free
9902.17.53 Exterior lights, of base metal other than of brass, such lights round in shape, with a height of 11.5 cm or more but not over 12 cm and a weight not over 1.3 kg, each containing a halogen lamp, lamp holder, reflector, autotransformer and electrical connector, the foregoing configured to be mounted to the exterior of an aircraft and designed for illuminating the top surface, leading edge and engine nacelle areas of the aircraft wings for wing icing detection (provided for in subheading 9405.40.60) Free
9902.17.54 Clear or frosted columnar globes or shades, certified by the importer as of extruded borosilicate glass; the foregoing measuring 2.54 cm or more but not over 30.48 cm in length and 2.54 cm or more but not over 20.32 cm in diameter, each with circular openings at the top and bottom, designed for use on portable non-electrical lanterns for outdoor use (provided for in subheading 9405.91.40) Free
9902.17.55 Ski bindings (other than for cross-country skis), valued not over $55 each (provided for in subheading 9506.12.80) Free
9902.17.56 Golf club driver heads, each stamped or otherwise permanently marked to indicate a loft of 9.5 degrees (provided for in subheading 9506.39.00) Free
9902.17.57 Golf club driver heads, each stamped or otherwise permanently marked to indicate a loft over 9.5 degrees (provided for in subheading 9506.39.00) Free
9902.17.58 Golf club driver heads, each stamped or otherwise permanently marked to indicate a loft under 9.5 degrees (provided for in subheading 9506.39.00) Free
9902.17.59 Golf club heads designed for clubs designated as 1-irons, 2-irons, 3-irons, 4-irons or 5-irons (provided for in subheading 9506.39.00) 1.0%
9902.17.60 Golf club hybrid heads, each stamped or otherwise permanently marked as such (provided for in subheading 9506.39.00) Free
9902.17.61 Golf club wedge heads, each stamped or permanently marked to indicate a loft of 56 degrees or less (provided for in subheading 9506.39.00) Free
9902.17.62 Golf club heads designed for clubs designated as 6-irons and 7-irons (provided for in subheading 9506.39.00) 1.0%
9902.17.63 Golf club heads designed for clubs designated as 8-irons and 9-irons (provided for in subheading 9506.39.00) Free
9902.17.64 Golf club wedge heads, each stamped or otherwise permanently marked to indicate a loft of greater than 56 degrees (provided for in subheading 9506.39.00) Free
9902.17.65 Golf club putter heads (provided for in subheading 9506.39.00) 3.0%
9902.17.70 Tennis rackets, strung and packaged for retail sale (provided for in subheading 9506.51.20) 2.6%
9902.17.71 Lawn-tennis rackets, unstrung (provided for in subheading 9506.51.40) 0.4%
9902.17.72 Racquetball rackets (provided for in subheading 9506.59.80) Free
9902.17.73 Squash rackets (provided for in subheading 9506.59.80) Free
9902.17.74 Inflatable volleyballs (provided for in subheading 9506.62.80) Free
9902.17.75 Inflatable basketballs, each having an external surface other than of leather or of rubber (provided for in subheading 9506.62.80) 3.1%
9902.17.76 Inflatable basketballs with outer surface of leather (provided for in subheading 9506.62.80) Free

How the Harmonized Tariff Schedule is organized

The Harmonized Tariff Schedule of the United States (HTSUS) is the codified system U.S. Customs and Border Protection uses to assign duty rates to imported goods. It is published by the U.S. International Trade Commission (USITC) and updated when trade-policy actions take effect — presidential proclamations, antidumping orders, Section 301 actions, and free-trade-agreement implementations. The schedule has 22 sections, 99 chapters, and roughly 18,000 individual tariff lines. Each tariff line has a 10-digit HTS code where the first 6 digits map to the international Harmonized System (HS) maintained by the World Customs Organization, the next two digits identify the U.S. statistical heading, and the final two digits are the U.S. statistical suffix used for trade-data reporting.

Browsing tariff lines alphabetically (the letter-paged index) is one of three primary navigation paths PlainTariff offers — alongside section/chapter hierarchy and product-keyword search. Alphabetic browse is useful when the importer or researcher has a partial product name but does not know which chapter or section the product falls under. A surprising number of tariff lines are organized by common product names (apples, automobiles, batteries) rather than by industry taxonomy, so alphabetic browse often surfaces relevant lines faster than hierarchical drill-down.

Reading a tariff line page

Each tariff-line detail page shows the General (MFN) duty rate, any Special preferential rates available under free trade agreements (USMCA, GSP, CAFTA-DR, KORUS, JAPAN, etc.), and the Column 2 rate that applies to imports from non-MFN countries (currently Cuba and North Korea). Rates can be expressed as ad valorem (a percentage of customs value), specific (a dollar amount per unit of quantity), or compound (a combination of both). The detail page preserves the original rate text exactly as published by USITC and additionally extracts a numeric percentage where applicable to enable comparison and ranking.

Beyond the duty rate itself, the detail page surfaces the unit of quantity that customs uses for the line, the chapter and section it belongs to, and any additional duties that apply — antidumping (AD), countervailing (CVD), Section 201 safeguards, or Section 301 tariffs. The chapter context matters because two products with very similar descriptions can sit in different chapters with very different rates: for example, certain food products straddle the chapter boundary between agricultural commodity and prepared food, where the prepared-food chapter frequently carries 2-3x the duty rate of the raw commodity chapter.

Compliance use cases

Importers use the alphabetic browse to validate classifications a customs broker has proposed for a shipment, to find duty rates while sourcing new products, and to identify free-trade-agreement opportunities that might reduce the effective duty rate on already-imported product categories. Researchers and journalists use the browse to write about tariff incidence by product, to track which categories have been most affected by recent Section 301 actions, and to compare U.S. duty rates with rates in partner countries. Small business owners use it to estimate landed cost when evaluating whether to import directly rather than through a domestic distributor.

For binding classification determinations, always verify against the official USITC HTS site and consult a licensed customs broker. PlainTariff is an unofficial reference tool — it preserves USITC data faithfully but does not provide formal customs advice. Classification errors at the border can result in shipment delays, post-entry duty adjustments, or penalties under 19 USC 1592.

How tariff rates connect to consumer prices

Import duties feed into landed cost, which in turn feeds into wholesale and ultimately retail pricing for imported goods. The pass-through is rarely 1:1 — retailers may absorb part of the duty cost, importers may renegotiate supplier terms, and currency movements can offset or amplify the duty effect. Academic research on the 2018-2019 Section 301 tariffs found roughly 95% pass-through to U.S. wholesale prices within 6 months, with smaller and more delayed effects on retail. The implication for PlainTariff readers: an MFN duty rate increase is a real cost to importers, but the magnitude that reaches end consumers depends on competitive dynamics in the downstream supply chain.

Tariff incidence — who bears the economic cost — is technically a different question from statutory incidence (who legally pays the duty to CBP). The duty is paid by the importer of record at entry, but the economic burden can shift to exporters (via lower wholesale prices), domestic competitors (via increased market share), or consumers (via higher retail prices). Most economic studies of recent tariff actions find that the bulk of the economic incidence on consumer goods has fallen on U.S. importers and consumers rather than on foreign exporters.

Trade-program preferences worth knowing about

Beyond the standard MFN rates, several preference programs can substantially reduce or eliminate duty on qualifying imports. USMCA covers Canada and Mexico and provides duty-free treatment for goods that meet rules of origin (which can be complex — automotive, textile, and agricultural ROOs are particularly stringent). CAFTA-DR covers Central American countries and the Dominican Republic. KORUS covers Korea. JAPAN, AUSTRALIA, ISRAEL, and BAHRAIN each have bilateral FTAs with product-specific carve-outs. GSP (Generalized System of Preferences) provides duty-free entry for qualifying developing-country goods.

Each preference program has its own claim procedure — generally an importer self-certification at entry, supported by supplier documentation that the goods meet the program's rules of origin. Misclaimed preferences are a frequent source of post-entry duty assessments and penalties, so importers should consult a licensed customs broker before claiming a preference for the first time on a new product or supplier combination.