Tariff Lines: C
Open-data reference.
1,042 tariff lines starting with "C"
Showing 1,001–1,042 of 1,042
| HTS Number | Description | Rate |
|---|---|---|
| 9902.14.85 | Chopped strands of glass, of a length greater than 50 mm, containing over 90 percent silica by weight (provided for in subheading 7019.19.30) | Free |
| 9902.14.91 | Clad strips of silver, further worked than semimanufactured, each containing 54 percent or more but not over 56 percent by weight of silver; having three layers with one layer containing 87 percent or more but not over 89 percent by weight of silver and 11 percent or more but not over 3 percent of tin, a second layer containing 99.9 percent or more by weight of silver, and a third layer containing 14.5 percent or more but not over 15.5 percent by weight of silver, 79 percent or more but not over 81 percent of copper and 4.8 percent or more but not over 5.2 percent of phosphorus; measuring 15.65 mm in width and 0.95 mm in thickness, presented in coils (provided for in subheading 7115.90.40) | Free |
| 9902.15.07 | Cold-formed profiles of nickel alloys, having the symmetrical cross section of an isosceles triangle, with a total width between 2.9 mm and 3.1 mm and a height between 3.8 mm and 4.3 mm (provided for in subheading 7505.12.50) | Free |
| 9902.15.08 | Cold-formed wire of nickel-titanium alloy, presented in coils, with round cross section, with a diameter of 0.1778 mm or more but not over 0.6350 mm (provided for in subheading 7505.22.10) | Free |
| 9902.15.44 | Connecting rods designed for use in compression-ignition internal combustion piston engines (diesel or semi-diesel engines) for vehicles of subheading 8701.20 or heading 8702, 8703, or 8704, each rod measuring at least 20 cm but not exceeding 120 cm in length, at least 10 cm but not exceeding 60 cm in width, and at least 5 cm but not exceeding 90 cm in height (provided for in subheading 8409.99.91) | 0.4% |
| 9902.15.45 | Cast iron crankcases, suitable for use solely or principally with marine propulsion engines, each crankcase measuring more than 1.1 m in length (provided for in subheading 8409.99.92) | Free |
| 9902.15.46 | Cast-iron cylinder heads suitable for use solely or principally with marine compression-ignition engines, such parts with cylinder bore over 125 mm and weighing over 32 kg each (provided for in subheading 8409.99.92) | Free |
| 9902.15.57 | Chimney range hoods, island range hoods or under-the-cabinet range hoods, of a kind normally used in the household, designed for permanent installation to a wall or ceiling, each such hood measuring over 121 cm on its maximum horizontal side, presented with or without a blower; the foregoing, if presented without blower, incorporating other ventilating equipment (provided in subheading 8414.80.90) | Free |
| 9902.16.94 | Cathode-ray data/graphic display tubes, color, with a phosphor dot screen pitch smaller than .4mm and with less than 90-degree deflection.(provided for in subheading 8540.40.10) | Free |
| 9902.17.08 | Cycles, each either with two wheels and having both wheels not exceeding 63.5 cm in diameter, or with three wheels; all the foregoing propelled by laterally mounted pedals designed to be pushed in an alternative elliptical step motion (provided for in subheading 8712.00.50) | Free |
| 9902.17.44 | Chime melody rod assemblies and parts thereof, the foregoing suitable for use in the production of grandfather clocks, wall clocks and mantel clocks (provided for in subheading 9114.90.50) | Free |
| 9902.17.54 | Clear or frosted columnar globes or shades, certified by the importer as of extruded borosilicate glass; the foregoing measuring 2.54 cm or more but not over 30.48 cm in length and 2.54 cm or more but not over 20.32 cm in diameter, each with circular openings at the top and bottom, designed for use on portable non-electrical lanterns for outdoor use (provided for in subheading 9405.91.40) | Free |
| 9902.17.99 | Coffee servers, each with exterior of stainless steel, vacuum glass liner, a hinged brew-through lid with top lever style pump and swivel base; the foregoing with capacity over 2 liters (provided for in subheading 9617.00.40) | Free |
| 9903.01.13 | Crude oil, natural gas, lease condensates, natural gas liquids, refined petroleum products, uranium, coal, biofuels, geothermal heat, the kinetic movement of flowing water, and critical minerals, as defined by 30 U.S.C. 1606(a)(3) | The duty provided in the applicable subheading + 10% |
| 9903.04.20 | Cheeses and substitutes for cheeses, valued over 11.3¢ per kg, containing, or processed from, Italian-type cheeses, made from cow's milk, not in original loaves (Romano made from cow's milk, Reggiano, Parmesan, Provolone, Provoletti, Sbrinz and Goya) (provided for in subheading 0406.20.77, 0406.20.79, 0406.30.77, 0406.30.79, 0406.90.66 or 0406.90.68) | 200% |
| 9903.04.40 | Carrots (whether or not reduced in size), prepared or preserved, but not packed in salt, not in brine, nor pickled, in airtight containers (provided for in subheading 2005.99.10) | 200% |
| 9903.27.04 | Carbides of silicon (provided for in subheading 2849.20.10 or 2849.20.20) | 100% |
| 9903.27.12 | Catalysts in the form of wire cloth or grill, of platinum (provided for in subheading 7115.10.00) | 100% |
| 9903.41.40 | Complete color television receivers containing in a single housing apparatus for receiving and displaying off-the-air each standard U.S. broadcast channel, with or without external speakers, having a single picture tube intended for direct viewing, with a video display diagonal exceeding 45 cm but not exceeding 50 cm (provided for in subheading 8528.72.32 or 8528.72.48) | 100% |
| 9903.41.45 | Complete color television receivers containing in a single housing apparatus for receiving and displaying off-the-air each standard U.S. broadcast channel, with or without external speakers, having a single picture tube intended for direct viewing, with a video display diagonal exceeding 50 cm but not exceeding 52 cm (provided for in subheading 8528.72.32 or 8528.72.48) | 100% |
| 9903.45.27 | Crystalline silicon photovoltaic cells, as defined in note 18(c) to this subchapter, and modules as defined in note 18(g) to this subchapter, all the foregoing when the product and originating good of Canada | No change |
| 9903.76.03 | Completed kitchen cabinets and vanities and parts of kitchen cabinets and vanities provided for in subdivision (f) of U.S. note 37 of this subchapter | The duty provided in the applicable subheading + 25% |
| 9903.80.08 | Cold-rolled sheet and other products, provided for in subheading 7209.15.00, 7209.16.00, 7209.17.00, 7209.18.15, 7209.18.60, 7209.25.00, 7209.26.00, 7209.27.00, 7209.28.00, 7209.90.00, 7210.70.30, 7225.50.70, 7225.50.80 or 7225.99.00 | Free |
| 9903.80.09 | Cold-rolled strip and other products, provided for in subheading 7211.23.15, 7211.23.20, 7211.23.30, 7211.23.45, 7211.23.60, 7211.29.20, 7211.29.45, 7211.29.60, 7211.90.00, 7212.40.10, 7212.40.50, 7226.92.50, 7226.92.70, 7226.92.80 or 7226.99.01 (except for statistical reporting numbers 7226.99.0110 and 7226.99.0130) | Free |
| 9903.80.10 | Cold-rolled black plate, provided for in subheading 7209.18.25 | Free |
| 9903.80.31 | Cold-rolled sheet of stainless steel and other products, provided for in subheading 7219.32.00, 7219.33.00, 7219.34.00, 7219.35.00 or 7219.90.00 | Free |
| 9903.80.32 | Cold-rolled strip of stainless steel, provided for in subheading 7220.20.10, 7220.20.60, 7220.20.70, 7220.20.80, 7220.20.90 or 7220.90.00 | Free |
| 9903.80.33 | Cold-rolled plate of stainless steel, in coils, provided for in subheading 7219.31.00 (except for statistical reporting number 7219.31.0050) | Free |
| 9903.80.68 | Cold-rolled sheet, provided for in subheading 7209.15.00, 7209.16.00, 7209.17.00, 7209.18.15, 7209.18.60, 7209.25.00, 7209.26.00, 7209.27.00, 7209.28.00, 7209.90.00, 7210.70.30, 7225.50.70, 7225.50.80 or 7225.99.00) | Free |
| 9903.80.69 | Cold-rolled strip (provided for in subheading 7211.23.15, 7211.23.20, 7211.23.30, 7211.23.45, 7211.23.60, 7211.29.20, 7211.29.45, 7211.29.60, 7211.90.00, 7212.40.10, 7212.40.50, 7226.92.50, 7226.92.70, 7226.92.80 or 7226.99.01 (except for statistical reporting number 7226.99.0110 or 7226.99.0130) | Free |
| 9903.80.70 | Cold-rolled black plate (provided for in subheading 7209.18.25) | Free |
| 9903.80.91 | Cold-rolled sheet of stainless steel (provided for in subheading 7219.32.00, 7219.33.00, 7219.34.00, 7219.35.00 or 7219.90.00) | Free |
| 9903.80.92 | Cold-rolled strip of stainless steel (provided for in subheading 7220.20.10, 7220.20.60, 7220.20.70, 7220.20.80, 7220.20.90 or 7220.90.00) | Free |
| 9903.80.93 | Cold-rolled plate of stainless steel, in coils (provided for in subheading 7219.31.00 (except for statistical reporting number 7219.31.0050)) | Free |
| 9903.81.28 | Cold-rolled sheet, provided for in subheading 7209.15.00, 7209.16.00, 7209.17.00, 7209.18.15, 7209.18.60, 7209.25.00, 7209.26.00, 7209.27.00, 7209.28.00, 7209.90.00, 7210.70.30, 7225.50.70, 7225.50.80 or 7225.99.00) | Free |
| 9903.81.29 | Cold-rolled strip (provided for in subheading 7211.23.15, 7211.23.20, 7211.23.30, 7211.23.45, 7211.23.60, 7211.29.20, 7211.29.45, 7211.29.60, 7211.90.00, 7212.40.10, 7212.40.50, 7226.92.50, 7226.92.70, 7226.92.80 or 7226.99.01 (except for statistical reporting number 7226.99.0110 or 7226.99.0130)) | Free |
| 9903.81.30 | Cold-rolled black plate (provided for in subheading 7209.18.25) | Free |
| 9903.81.51 | Cold-rolled sheet of stainless steel (provided for in subheading 7219.32.00, 7219.33.00, 7219.34.00, 7219.35.00 or 7219.90.00) | Free |
| 9903.81.52 | Cold-rolled strip of stainless steel (provided for in subheading 7220.20.10, 7220.20.60, 7220.20.70, 7220.20.80, 7220.20.90 or 7220.90.00) | Free |
| 9903.81.53 | Cold-rolled plate of stainless steel, in coils (provided for in subheading 7219.31.00 (except for statistical reporting number 7219.31.0050)) | Free |
| 9903.85.44 | Castings or forgings of aluminum (described in statistical reporting number 7616.99.5160 or 7616.99.5170) | The duty provided in the applicable subheading |
| 9903.85.64 | Castings or forgings of aluminum (described in statistical reporting number 7616.99.5160 or 7616.99.5170 | The duty provided in the applicable subheading |
About this letter-paged tariff browse
Tariff lines starting with the letter C span multiple HTS chapters and sections, because the Harmonized Tariff Schedule classifies products by common product name rather than by industry sector at the description level. Products beginning with this letter may appear across animal-product chapters, mineral-product chapters, prepared-food chapters, machinery chapters, and so on — wherever the USITC's plain-language description for the tariff line happens to start with C. The pagination above moves through every line whose description starts with this letter, in chapter order by default.
For each tariff line you can click through to the detail page to see the full General (MFN) duty rate, any Special preferential rates available under free trade agreements (USMCA, GSP, CAFTA-DR, KORUS, JAPAN), and the Column 2 rate that applies to imports from non-MFN countries. Rates can be expressed as ad valorem (a percentage of customs value), specific (a dollar amount per unit of quantity), or compound. The detail page preserves the original USITC rate text exactly as published and additionally extracts a numeric percentage for search and ranking where applicable.
How alphabetic browse complements hierarchical browse
The HTS has two primary navigation modes: hierarchical (sections → chapters → headings → subheadings → tariff lines) and alphabetic (by description). Hierarchical browse is the formal structure customs brokers use because classification rules require working through chapter notes and General Rules of Interpretation. But alphabetic browse is often faster for importers who know the common name of a product but not which chapter it belongs to. For example, "almonds" appears in Chapter 8 (edible fruit) while "almond oil" appears in Chapter 15 (animal/vegetable fats) and "almond paste" appears in Chapter 20 (prepared fruit) — three different duty regimes for related products. Alphabetic browse surfaces all three faster than chapter drill-down.
For binding tariff classifications, always verify the line and rate against the official USITC HTS site and consult a licensed customs broker. PlainTariff is an unofficial reference maintained to make USITC data more browsable; it is not a substitute for formal customs advice.
Why duty rates vary so widely
MFN duty rates on the schedule range from 0% (free) on roughly 5,979 tariff lines to north of 100% on a small number of textile and tobacco classifications. The variation reflects decades of accumulated trade policy: GATT/WTO rounds of reciprocal tariff reductions, sector-specific protection retained for textiles, footwear, and certain agricultural commodities, and special programs that eliminated duties for products with strategic-supply or development-policy rationale. Within a single chapter, individual subheadings can carry rates from 0% to 30%+ depending on the specific product description — which is why classification accuracy matters so much for importers.
Free trade agreements layer on top of the MFN schedule and can override the General rate for imports from FTA partners. USMCA (Canada, Mexico) eliminates duties on most tariff lines for qualifying originating goods; CAFTA-DR, KORUS, JAPAN, AUSTRALIA, ISRAEL, and other bilaterals each have their own product-level carve-outs and rules of origin. The Special rate column on each detail page identifies which FTAs apply to that line. Generalized System of Preferences (GSP) and African Growth and Opportunity Act (AGOA) provide unilateral preferences for eligible developing-country imports.
Additional duties beyond the MFN rate
The Column 1 General rate is not always the final duty an importer pays. Section 201 safeguards, Section 232 national-security tariffs (steel, aluminum), and Section 301 actions (China-origin goods) can add 10-100 percentage points to the effective rate. Antidumping and countervailing duties imposed by the Department of Commerce on specific product/country combinations can add hundreds of percentage points. None of these supplemental duties appear in the General rate column — importers need to cross-reference the country of origin and the product-specific orders in effect at time of entry to compute the actual landed duty cost.
PlainTariff currently surfaces the General, Special, and Column 2 rates as published in the USITC HTS 2026 Basic Edition. Section 301, AD/CVD, and other supplemental duty data is not integrated; for those, importers should consult Customs Rulings Online Search System (CROSS) and the active Federal Register notices, or work with a licensed customs broker.